Hole Diameter Hole Diameter |
|---|
Thickness Thickness |
|---|
|
|
Hole Center-to-Center Hole Center-to-Center |
|---|
|
|
|
Bolt-Together Framing Component Bolt-TogetherFraming Component |
|---|
 |  |
| Rail | Telescoping Rail Set |
 |  |
| Surface Bracket | Connector |
 |  |
| Mounting Foot | Bracket Fastener Set |
 |  |
| Corner Bracket | Concrete Anchor |
Finish Finish |
|---|
|
Yield Strength Yield Strength |
|---|
|
Connector Type Connector Type |
|---|
|
About Perforated Sheets
More
Steel Perforated Sheets
Use for machine guards and protective panels in noncorrosive environments. Steel is strong and wear resistant. It has good weldability and formability.
| Hole Dia. | Open Area | Hole Center-to-Center | 24" × 24" | 36" × 40" | 48" × 48" | |
0.024" Thick. (24 Gauge) | ||||||
|---|---|---|---|---|---|---|
| 0.033" | 20% | 0.077" | 0000000 | |||
| 0.045" | 28% | 0.086" | 0000000 | |||
0.03" Thick. (22 Gauge) | ||||||
| 0.05" | 26% | 0.094" | 0000000 | |||
| 0.0625" | 23% | 0.125" | 0000000 | |||
| 0.078" | 45% | 0.109" | 0000000 | |||
| 0.093" | 33% | 0.156" | 0000000 | |||
| 0.125" | 40% | 0.188" | 0000000 | |||
| 0.156" | 63% | 0.188" | 0000000 | |||
0.036" Thick. (20 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | |||
| 0.0625" | 30% | 0.109" | 0000000 | |||
| 0.0625" | 41% | 0.094" | 0000000 | |||
| 0.075" | 51% | 0.1" | 0000000 | |||
| 0.078" | 45% | 0.109" | 0000000 | |||
| 0.093" | 33% | 0.156" | 0000000 | |||
| 0.125" | 40% | 0.188" | 0000000 | |||
| 0.14" | 51% | 0.188" | 0000000 | |||
| 0.156" | 63% | 0.188" | 0000000 | |||
| 0.1875" | 51% | 0.25" | 0000000 | |||
| 0.25" | 40% | 0.375" | 0000000 | |||
| 0.25" | 58% | 0.313" | 0000000 | |||
0.048" Thick. (18 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | |||
| 0.0625" | 30% | 0.109" | 0000000 | |||
| 0.078" | 36% | 0.125" | 00000000 | |||
| 0.093" | 33% | 0.156" | 00000000 | |||
| 0.125" | 40% | 0.188" | 00000000 | |||
| 0.14" | 51% | 0.188" | 00000000 | |||
| 0.156" | 46% | 0.219" | 00000000 | |||
| 0.1875" | 51% | 0.25" | 00000000 | |||
| 0.25" | 58% | 0.313" | 00000000 | |||
0.06" Thick. (16 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 00000000 | |||
| 0.0625" | 30% | 0.109" | 00000000 | |||
| 0.078" | 36% | 0.125" | 00000000 | |||
| 0.093" | 33% | 0.156" | 00000000 | |||
| 0.125" | 40% | 0.188" | 00000000 | |||
| 0.14" | 51% | 0.188" | 00000000 | |||
| 0.156" | 46% | 0.219" | 00000000 | |||
| 0.156" | 63% | 0.188" | 00000000 | |||
| 0.1875" | 33% | 0.313" | 00000000 | |||
| 0.1875" | 51% | 0.25" | 00000000 | |||
| 0.25" | 40% | 0.375" | 00000000 | |||
| 0.25" | 58% | 0.313" | 00000000 | |||
| 0.3125" | 47% | 0.438" | 00000000 | |||
| 0.375" | 40% | 0.563" | 00000000 | |||
| 0.5" | 48% | 0.688" | 00000000 | |||
| 0.75" | 51% | 1" | 00000000 | |||
0.075" Thick. (14 Gauge) | ||||||
| 0.25" | 40% | 0.375" | 00000000 | |||
| 0.375" | 40% | 0.563" | 00000000 | |||
| 0.5" | 48% | 0.688" | 00000000 | |||
1/4" Thick. | ||||||
| 0.25" | 40% | 0.375" | 00000000 | |||
High-Flow Steel Perforated Sheets
Hexagonal holes provide a large open area for high-flow applications. Steel is strong and wear resistant. It has good weldability and formability.
Flat and L-Shaped Bolt-Together Framing and Fittings
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
Zinc-plated steel rails are more corrosion resistant in wet environments than powder-coated steel.
Galvanized steel rails have better corrosion resistance in wet environments than zinc-plated steel and can be used outdoors.
Wd. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Thick. | Material | Color | 1 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 8 ft. | |
Flat | |||||||||||
| 1 3/8" | __ | 0.08" | Zinc-Plated Steel | __ | 0000000 | ||||||
L-Shaped | |||||||||||
| 1 1/4" | 1 1/4" | 0.0469" | Galvanized Steel | __ | 0000000 | ||||||
| 1 1/2" | 1 1/2" | 0.074" | Zinc-Plated Steel | __ | 0000000 | ||||||
| 1 1/2" | 1 1/2" | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
| 1 1/2" | 2 1/4" | 0.075" | Galvanized Steel | __ | 0000000 | ||||||
| 1 1/2" | 2 1/4" | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
| 1 5/8" | 1 5/8" | 0.074" | Powder-Coated Steel | Green | 0000000 | ||||||
| 1 5/8" | 2 3/8" | 0.074" | Powder-Coated Steel | Green | 0000000 | ||||||
| 1 5/8" | 3 3/16" | 0.104" | Powder-Coated Steel | Green | 0000000 | ||||||
| 1 3/4" | 3" | 0.105" | Galvanized Steel | __ | 0000000 | ||||||
| Green Aerosol Touch-Up Paint for Powder-Coated Steel Rails (12 oz.) | 00000000 | Each | 000000 |
Steel Bolt-Together Framing and Fittings
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
Rails have bolt holes on all four sides. Connect multiple rails with brackets or slide one length of rail into the next larger size and bolt together using curved-bolt or locking-pin connectors. Select connectors based on the larger size rail in the connection.
Galvanized steel rails have good corrosion resistance in wet environments.
Steel rails are lightly oiled.
Rail | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Wall Thick. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | 12 ft. | |
Galvanized Steel | ||||||||
| 1" | 1" | 0.083" | 00000000 | |||||
| 1" | 1" | 0.105" | 00000000 | |||||
| 1 1/4" | 1 1/4" | 0.083" | 00000000 | |||||
| 1 1/4" | 1 1/4" | 0.105" | 00000000 | |||||
| 1 1/2" | 1 1/2" | 0.083" | 00000000 | |||||
| 1 1/2" | 1 1/2" | 0.105" | 00000000 | |||||
| 1 3/4" | 1 3/4" | 0.105" | 00000000 | |||||
| 2" | 2" | 0.083" | 00000000 | |||||
| 2" | 2" | 0.105" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 00000000 | |||||
Steel | ||||||||
| 1 1/2" | 1 1/2" | 0.105" | 00000000 | |||||
| 1 3/4" | 1 3/4" | 0.105" | 00000000 | |||||
| 2" | 2" | 0.105" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 00000000 | |||||
Telescoping rail sets include two rails that can be nested and locked together.
Rail | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Outer Ht. | Outer Wd. | Inner Ht. | Inner Wd. | Wall Thick. | Material | Mounting Fasteners Included | Includes | 4 ft. | 6 ft. | 8 ft. | |
| 1 3/4" | 1 3/4" | 1 1/2" | 1 1/2" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
| 2" | 2" | 1 3/4" | 1 3/4" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
| 2 1/4" | 2 1/4" | 2" | 2" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
| 2 1/2" | 2 1/2" | 2 1/4" | 2 1/4" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
 Corner |  Crossover | |
 Straight |  Tee | |
Surface and corner brackets connect same-size rails.
| Bracket Type | For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
| Corner | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 4 3/4" | Zinc-Plated Steel | No | 00000000 | 00000 |
| Crossover | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 2 1/4" | Zinc-Plated Steel | No | 00000000 | 0000 |
| Straight | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 8" | Zinc-Plated Steel | No | 00000000 | 0000 |
| Tee | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 5 1/4" | Zinc-Plated Steel | No | 00000000 | 0000 |
Surface and corner brackets connect same-size rails.
| For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
| 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 2" | Zinc-Plated Steel | No | 00000000 | 00000 |
Curved-bolt connector sets connect rails to rails.
Locking-pin connectors allow quick assembly, disassembly, and adjustments for rail-to-rail connections.
| For Rail Ht. | Material | Includes | Pkg. Qty. | Pkg. | |
Curved-Bolt Set | |||||
|---|---|---|---|---|---|
| 1 3/4" | Zinc-Plated Steel | 10 Bolts, 10 Metal Washers, 10 Nuts | 10 | 00000000 | 000000 |
| 2" | Zinc-Plated Steel | 10 Bolts, 10 Metal Washers, 10 Nuts | 10 | 00000000 | 00000 |
| 2 1/4" | Zinc-Plated Steel | 10 Bolts, 10 Metal Washers, 10 Nuts | 10 | 00000000 | 00000 |
| 2 1/2" | Zinc-Plated Steel | 10 Bolts, 10 Metal Washers, 10 Nuts | 10 | 00000000 | 00000 |
| Each | |||||
Locking Pin | |||||
| 1 1/2", 1 3/4" | Zinc-Plated Steel | __ | __ | 00000000 | 0000 |
| 2", 2 1/4", 2 1/2" | Zinc-Plated Steel | __ | __ | 00000000 | 0000 |
Mounting foot fits 1 3/4" to 2 1/2" square rails and has a flange to attach to surfaces such as floors, walls, and ceilings.
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| Mounting Foot Type | For Rail Ht. | Lg. | Material | No. of | Dia. | Mounting Fasteners Included | Each | |
| Fixed Height | 1 3/4", 2", 2 1/4", 2 1/2" | 6" | Galvanized Steel | 4 | 5/8" | No | 00000000 | 000000 |
Concrete anchor installs mounting foot in concrete. Set the anchor in concrete and connect foot with 1/2" x 2" flange bolts (not included).
| For Rail Ht. | For Bolt Thread Size | Material | Each | |
| 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 1/2"-13 | Steel | 00000000 | 00000 |
Bracket fastener sets connect brackets to rails.
| For Rail Ht. | Material | Includes | Pkg. Qty. | Pkg. | |
| 1 1/2" | Steel | 10 Bolts, 10 Metal Washers, 10 Nuts, 10 Plastic Washers | 10 | 00000000 | 00000 |
| 1 3/4" | Steel | 10 Bolts, 10 Metal Washers, 10 Nuts, 10 Plastic Washers | 10 | 00000000 | 0000 |
| 2" | Steel | 10 Bolts, 10 Metal Washers, 10 Nuts, 10 Plastic Washers | 10 | 00000000 | 0000 |
| 2 1/4" | Steel | 10 Bolts, 10 Metal Washers, 10 Nuts, 10 Plastic Washers | 10 | 00000000 | 0000 |
| 2 1/2" | Steel | 10 Bolts, 10 Metal Washers, 10 Nuts, 10 Plastic Washers | 10 | 00000000 | 0000 |