McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    161 Products
    About Plastic
    industrial info icon

    Compare over 25 types of plastic to find the right material for you.

    Clear Easy-Thermoform PETG Rods

    Image of Product. Front orientation. Plastic. Clear Easy-Thermoform PETG Rods.
    These PETG rods can be formed into complex shapes, such as display racks, without sacrificing durability.
    Dia.
    Dia. Tolerance
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Food Industry
    Std.
    Choose a Length, ft.
    Per
    Ft.
    Clear
    1/8"-0.005" to 0.005"Extruded-401407,100 to 7,7001.7FDA Standard
    		68325K13100000
    3/16"-0.007" to 0.007"Extruded-401407,100 to 7,7001.7FDA Standard
    		68325K1510000
    1/4"-0.010" to 0.010"Extruded-401407,100 to 7,7001.7FDA Standard
    		68325K1710000
    5/16"-0.010" to 0.010"Extruded-401407,100 to 7,7001.7FDA Standard
    		68325K1910000
    3/8"-0.010" to 0.010"Extruded-401407,100 to 7,7001.7FDA Standard
    		68325K2110000
    1/2"-0.012" to 0.012"Extruded-401407,100 to 7,7001.7FDA Standard
    		68325K2310000
    3/4"-0.025" to 0.025"Extruded-401407,100 to 7,7001.7FDA Standard
    		1, 2, 3, 4, 5, 68325K270000
    1"-0.030" to 0.030"Extruded-401407,100 to 7,7001.7FDA Standard
    		1, 2, 3, 4, 5, 68325K290000
    1 1/4"-0.035" to 0.035"Extruded-401407,100 to 7,7001.7FDA Standard
    		1, 2, 3, 4, 5, 68325K3100000
    1 1/2"-0.040" to 0.040"Extruded-401407,100 to 7,7001.7FDA Standard
    		1, 2, 3, 4, 5, 68325K3300000
     

    Fast-Travel Precision Acme Lead Screws and Nuts

    Image of ProductInUse. Front orientation. Contains Inset. Precision Lead Screws and Nuts. Fast-Travel Precision Acme Lead Screws and Nuts.
    Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. The threads have a tight thread fit for accurate, repeatable starts and stops. Pair with a motor in automated motion and positioning applications. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.
    Round Nuts—Right-Hand Thread
    Image of Product. Front orientation. Precision Lead Screws and Nuts. Fast-Travel Precision Acme Lead Screws and Nuts, Round Nuts—Right-Hand Thread.
    PET—PET plastic nuts are lightweight and corrosion resistant.
    Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
    Thread
    Size
    Lg.
    Dia.
    Thread
    Type
    Speed
    Ratio
    No. of Thread
    Starts
    Travel Distance
    per Turn
    Thread Fit
    Hardness
    Tensile
    Strength
    Dynamic Thrust
    Load Cap., lb.
    Temp.,
    ° F
    Each
    PET
    1/4"-12
    		3/4"1.344"Acme
    		4:140.333"Acme Class 2C
    		Not RatedNot Rated16015 to 1751349K105000000
    3/8"-8
    		3/4"1.344"Acme
    		2:120.25"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K10700000
    3/8"-8
    		3/4"1.344"Acme
    		4:140.5"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K10100000
    3/8"-10
    		3/4"1.344"Acme
    		2:120.2"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K11800000
    1/2"-8
    		1"1.469"Acme
    		2:120.25"Acme Class 2C
    		Not RatedNot Rated65015 to 1751349K1500000
    1/2"-10
    		1"1.469"Acme
    		2:120.2"Acme Class 2C
    		Not RatedNot Rated65015 to 1751349K2200000
    1/2"-10
    		1"1.469"Acme
    		5:150.5"Acme Class 2C
    		Not RatedNot Rated65015 to 1751349K10300000
     

    Precision Acme Lead Screws and Nuts

    Image of ProductInUse. Front orientation. Contains Inset. Precision Lead Screws and Nuts. Precision Acme Lead Screws and Nuts.
    Pair with a motor in automated motion and positioning applications. A tight thread fit allows these lead screws and nuts to make accurate, repeatable starts and stops. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.
    Round Nuts—Right-Hand Thread
    Image of Product. Front orientation. Precision Lead Screws and Nuts. Precision Acme Lead Screws and Nuts, Round Nuts—Right-Hand Thread.
    PET—PET plastic nuts are lightweight and corrosion resistant.
    Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
    Thread
    Size
    Lg.
    Dia.
    Thread
    Type
    Speed
    Ratio
    No. of Thread
    Starts
    Travel Distance
    per Turn
    Thread Fit
    Hardness
    Tensile
    Strength
    Dynamic Thrust
    Load Cap., lb.
    Temp.,
    ° F
    Each
    PET
    3/8"-8
    		3/4"1.344"Acme
    		1:110.125"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K134000000
    3/8"-10
    		3/4"1.344"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K13800000
    3/8"-12
    		3/4"1.344"Acme
    		1:110.083"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K14900000
    3/8"-16
    		3/4"1.344"Acme
    		1:110.063"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K3900000
    1/2"-10
    		1"1.465"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated65015 to 1751349K14100000
    5/8"-5
    		1 1/4"1.859"Acme
    		1:110.2"Acme Class 2C
    		Not RatedNot Rated1,00015 to 1751349K2300000
    5/8"-8
    		1 1/4"1.859"Acme
    		1:110.125"Acme Class 2C
    		Not RatedNot Rated1,00015 to 1751349K13600000
    5/8"-10
    		1 1/4"1.859"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated1,00015 to 1751349K14300000
    3/4"-5
    		1 1/2"2.234"Acme
    		1:110.2"Acme Class 2C
    		Not RatedNot Rated1,45015 to 1751349K121000000
    3/4"-6
    		1 1/2"2.234"Acme
    		1:110.167"Acme Class 2C
    		Not RatedNot Rated1,45015 to 1751349K129000000
    3/4"-10
    		1 1/2"2.234"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated1,45015 to 1751349K145000000
     
    Round Nuts—Left-Hand Thread
    Image of Product. Front orientation. Precision Lead Screws and Nuts. Precision Acme Lead Screws and Nuts, Round Nuts—Left-Hand Thread.
    PET—PET plastic nuts are lightweight and corrosion resistant.
    Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
    Thread
    Size
    Lg.
    Dia.
    Thread
    Type
    Speed
    Ratio
    No. of Thread
    Starts
    Travel Distance
    per Turn
    Thread Fit
    Hardness
    Tensile
    Strength
    Dynamic Thrust
    Load Cap., lb.
    Temp.,
    ° F
    Each
    PET
    3/8"-8
    		3/4"1.344"Acme
    		1:110.125"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K135000000
    3/8"-10
    		3/4"1.344"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K13900000
    3/8"-12
    		3/4"1.344"Acme
    		1:110.083"Acme Class 2C
    		Not RatedNot Rated35015 to 1751349K15100000
    1/2"-10
    		1"1.465"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated65015 to 1751349K14200000
    5/8"-8
    		1 1/4"1.859"Acme
    		1:110.125"Acme Class 2C
    		Not RatedNot Rated1,00015 to 1751349K13700000
    5/8"-10
    		1 1/4"1.859"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated1,00015 to 1751349K14400000
    3/4"-5
    		1 1/2"2.234"Acme
    		1:110.2"Acme Class 2C
    		Not RatedNot Rated1,45015 to 1751349K122000000
    3/4"-6
    		1 1/2"2.234"Acme
    		1:110.167"Acme Class 2C
    		Not RatedNot Rated1,45015 to 1751349K131000000
    3/4"-10
    		1 1/2"2.234"Acme
    		1:110.1"Acme Class 2C
    		Not RatedNot Rated1,45015 to 1751349K146000000
     

    Flanged Ball Bearings

    Image of Product. Front orientation. Ball Bearings. Flanged Ball Bearings, Sealed.

    Sealed

    Install these bearings inside a housing and they won't budge. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off-kilter.
    Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    Extended Inner Ring—Connect to mating parts without the need for a spacer. The inner ring juts out farther than the outer ring, so shaft collars and other objects won't touch the bearing's moving parts.
    Flange
    Temp.
    Range, ° F
    For Shaft
    Dia.
    For Housing
    ID
    Wd.
    OD
    Thk.
    ABEC
    Rating
    Dynamic Radial
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Min.
    Max.
    Inner Ring
    Type
    Each
    Sealed
     
    Steel
    1/4"11/16"5/16"0.813"0.06"Not Rated2502,500-20250Extended6384K342000000
     

    Ball Bearings

    Image of Product. Front orientation. Ball Bearings. Ball Bearings, Sealed.

    Sealed

    Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.
    Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    Temp.
    Range, ° F
    For Shaft
    Dia.
    For Housing
    ID
    Wd.
    ABEC
    Rating
    Dynamic Radial
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Min.
    Max.
    Inner Ring
    Type
    Bearing Trade
    No.
    Each
    Sealed
     
    Steel
    3/16"11/16"5/16"Not Rated2502,500-20250Standard3001-2RS6384K88000000
    1/4"11/16"5/16"Not Rated2502,500-20250Standard3002-2RS6384K3900000
    1 1/8"2 1/2"5/8"Not Rated3,8505,000-20250Standard1652-2RS2780T6700000
    1 1/4"2 1/2"5/8"Not Rated3,8505,000-20250Standard1654-2RS2780T6800000
    1 1/4"2 9/16"11/16"Not Rated5,3505,000-20250Standard1657-2RS2780T6900000
     

    Square Cut-to-Length Shipping Tubes

    Image of System. Shown with End Caps. Front orientation. Shipping Tubes. Square Cut-to-Length Shipping Tubes.

    Shown with End Caps

    Because of their square shape, these tubes can be stacked, and the flat surface is easier to label than a round surface. Use scissors to cut them down to the length you need. They are oil and moisture resistant and protect long, thin objects during shipping.
    Caps—Add end caps (sold separately) to close each end.
    Tubes
    Caps
    Inside
    End
    Caps
    Each
    Wd.
    Ht.
    Lg.
    Color
    Material
    Included
    No.
    Req.
    1-49
    50-99
    100-Up
    Material
    Pkg.
    Qty.
    Pkg.
    0.022" Thick
    0.4"0.4"48"ClearPETGNo21921T11000000000000000PVC
    		1001921T31000000
    0.4"0.4"72"ClearPETGNo21921T101000000000000PVC
    		1001921T3100000
    0.53"0.53"48"ClearPETGNo21921T12000000000000PVC
    		1001921T3200000
    0.53"0.53"72"ClearPETGNo21921T102000000000000PVC
    		1001921T3200000
    0.79"0.79"48"ClearPETGNo21921T13000000000000PVC
    		501921T3300000
    0.79"0.79"72"ClearPETGNo21921T103000000000000PVC
    		501921T3300000
    1.09"1.09"48"ClearPETGNo21921T14000000000000PVC
    		501921T3400000
    1.09"1.09"72"ClearPETGNo21921T104000000000000PVC
    		501921T3400000
    1.36"1.36"48"ClearPETGNo21921T15000000000000PVC
    		251921T3500000
    1.36"1.36"72"ClearPETGNo21921T105000000000000PVC
    		251921T3500000
     

    Sealed-End Round Cut-to-Length Shipping Tubes

    Image of Product. Shown with End Cap. Front orientation. Shipping Tubes. Sealed-End Round Cut-to-Length Shipping Tubes.
    Image of Specification. Front orientation. ZoomedIn view. Contains Annotated, Border. Shipping Tubes. Sealed-End Round Cut-to-Length Shipping Tubes.

    Shown with End Cap

    Use scissors to cut these tubes down to the length you need. Tubes are oil and moisture resistant. They have one sealed end and one open end. Use them to protect long, thin objects during shipping. Add an end cap (sold separately) to close the open end.
    Tubes
    Red Vinyl
    Plastic End Caps
    End
    Caps
    Each
    ID
    Inside
    Lg.
    Color
    Material
    Included
    No.
    Req.
    1-99
    100-499
    500-Up
    Pkg.
    Qty.
    Pkg.
    0.022" Thick
    0.28"5"ClearPETGNo12044T730000000000000001002044T61000000
    0.4"5"ClearPETGNo12044T740000000000001002044T6200000
    0.53"7"ClearPETGNo12044T750000000000001002044T6300000
    0.7"6"ClearPETGNo12044T76000000000000502044T6400000
    0.79"6"ClearPETGNo12044T77000000000000502044T6500000
    0.93"5"ClearPETGNo12044T78000000000000502044T6600000
    1.09"7"ClearPETGNo12044T79000000000000502044T6700000
    1.36"5"ClearPETGNo12044T81000000000000252044T6800000
     

    Clear Easy-Thermoform PETG Round Tubes

    Image of Product. Front orientation. Plastic. Clear Easy-Thermoform PETG Round Tubes.
    Form these PETG tubes into containers, packaging, and other complex shapes without sacrificing durability.
    OD
    ID
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Color
    Food Industry
    Std.
    Choose a Length, ft.
    Per
    Ft.
    Standard Tolerance
     
    1/16" Thick Wall
    5/16"3/16"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K15100000
    3/8"1/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K1710000
    1/2"3/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K2110000
    5/8"1/2"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K2510000
    3/4"5/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K2910000
    7/8"3/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K3310000
    1"7/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K3710000
    1 1/4"1 1/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K4110000
     
    1/8" Thick Wall
    1/2"1/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K1910000
    5/8"3/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K2310000
    3/4"1/2"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K2710000
    7/8"5/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K3110000
    1"3/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K3510000
    1 1/4"1"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K3910000
    1 3/8"1 1/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		69245K4310000
    1 1/2"1 1/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K450000
    1 5/8"1 3/8"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K470000
    1 3/4"1 1/2"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K490000
    2"1 3/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K510000
    2 1/4"2"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K530000
    2 1/2"2 1/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K5500000
    2 3/4"2 1/2"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K5700000
    3"2 3/4"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K5900000
    3 1/4"3"Extruded-401407,100 to 7,7001.7ClearFDA Standard
    		1, 2, 3, 4, 5, 69245K6100000
     

    Round Cut-to-Length Shipping Tubes

    Image of Product. Shown with End Caps. Front orientation. Shipping Tubes. Round Cut-to-Length Shipping Tubes.

    Shown with End Caps

    Use scissors to cut these tubes down to the length you need. They are oil and moisture resistant. Use them to protect long, thin objects during shipping. Add end caps (sold separately) to close each end.
    Black Vinyl Plastic End Caps—Add end caps to close each end.
    Tubes
    Black Vinyl
    Plastic End Caps
    Red Vinyl
    Plastic End Caps
    End
    Caps
    Each
    ID
    Inside
    Lg.
    Color
    Material
    Included
    No.
    Req.
    1-49
    50-99
    100-Up
    Pkg.
    Qty.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    0.012" Thick
    0.21"48"ClearPETGNo22044T342000000000000000100—2044T121000000———1002044T12000000
    0.3"48"ClearPETGNo22044T344000000000000100—2044T11100000———1002044T6100000
    0.42"48"ClearPETGNo22044T345000000000000100—2044T11200000———1002044T6200000
     
    0.014" Thick
    0.71"48"ClearPETGNo22044T34800000000000050—2044T11400000———502044T6400000
     
    0.015" Thick
    0.81"48"ClearPETGNo22044T34900000000000050—2044T11500000———502044T6500000
     
    0.017" Thick
    0.94"48"ClearPETGNo22044T35100000000000050—2044T11600000———502044T6600000
    1.1"48"ClearPETGNo22044T35200000000000050—2044T11700000———502044T6700000
     
    0.018" Thick
    1.21"48"ClearPETGNo22044T35400000000000025—2044T13100000———252044T1300000
    1.36"48"ClearPETGNo22044T35500000000000025—2044T11800000———252044T6800000
    1.64"48"ClearPETGNo22044T35800000000000025—2044T11900000———252044T6900000
     
    0.02" Thick
    0.19"48"ClearPETGNo22044T341000000000000100—2044T12100000———1002044T1200000
    1.82"48"ClearPETGNo22044T3600000000000025—2044T8700000———252044T8800000
     
    0.022" Thick
    0.28"48"ClearPETGNo22044T41000000000000100—2044T11100000———1002044T6100000
    0.4"48"ClearPETGNo22044T42000000000000100—2044T11200000———1002044T6200000
    0.53"48"ClearPETGNo22044T43000000000000100—2044T11300000———1002044T6300000
    0.7"48"ClearPETGNo22044T4400000000000050—2044T11400000———502044T6400000
    0.79"48"ClearPETGNo22044T4500000000000050—2044T11500000———502044T6500000
    0.93"48"ClearPETGNo22044T4600000000000050—2044T11600000———502044T6600000
    1.09"48"ClearPETGNo22044T4700000000000050—2044T11700000———502044T6700000
    1.2"48"ClearPETGNo22044T35300000000000025—2044T13100000———252044T1300000
    1.36"48"ClearPETGNo22044T4800000000000025—2044T11800000———252044T6800000
    1.64"48"ClearPETGNo22044T4900000000000025—2044T11900000———252044T6900000
    4"48"ClearPETGNo22044T3620000000000000002—2044T3640000———22044T3630000
     
    0.025" Thick
    3.09"48"ClearPETGNo22044T3610000000000000005—2044T13900000———52044T13800000
     
    0.028" Thick
    1.8"48"ClearPETGNo22044T35900000000000025—2044T8700000———252044T8800000
    2.05"48"ClearPETGNo22044T51000000000000—25———000009753K94252044T7100000
    2.55"48"ClearPETGNo22044T5200000000000010—2044T13700000———102044T7200000
     
    0.063" Thick
    1/4"72"ClearPETGNo22044T3430000000000000100—2044T11100000———1002044T6100000
    1/2"72"ClearPETGNo22044T346000000000000000100—2044T9100000———1002044T9200000
    0.63"72"ClearPETGNo22044T34700000000000000050—2044T11400000———502044T6400000
    0.88"72"ClearPETGNo22044T35000000000000000100—2044T8900000———1002044T900000
    1.38"72"ClearPETGNo22044T35600000000000000025—2044T9300000———252044T9400000
    1.63"72"ClearPETGNo22044T35700000000000000025—2044T8700000———252044T8800000
     
    back to top