About Plastic and Rubber Tubing
More
About Duct Hose
More
Moisture-Diffusing Hard Plastic Tubing for Air
- Semi-Flexible
- Compatible with Compression Tube Fittings and Push to Connect Tube Fittings
- Hard (Durometer 60D)
- Temperature Range: 32° to 140° F
Made from PFA plastic, this tubing keeps condensation from forming by diffusing water vapor. It’s often used with air cylinders, air-operated valves, and other compressed-air equipment. Steel supports inside the tube ends keep the tubing from collapsing, so you can create a strong seal with push-to-connect fittings. Tubing is clear so you can monitor flow inside the line. Over time, the color will change to brown, but this does not affect performance. Tubing dimensions may vary slightly based on the temperature and humidity of the environment.
Straight tubing is more rigid than coil tubing, so it’s used for gradual bends. It’s often paired with stationary equipment.
Coil tubing has tube ends that face the same direction, so it’s used for sharp bends. It’s often used to connect moving parts.
Inline coil tubing has ends that face opposite directions. It’s used to make inline connections between straight tubing and components that rotate.
Note: Do not cut tube ends or remove tube supports.
For technical drawings and 3-D models, click on a part number.
Coil | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| ID, mm | OD, mm | Wall Thick., mm | OD, mm | Ht., mm | Lg., mm | Max. Pressure | Color | Each | |
Clear PFA Plastic | |||||||||
| 2.5 | 4 | 0.75 | 15 | 40 | 50 | 100 psi @ 72° F | Clear | 0000000 | 0000000 |
Crack-Resistant Hard Plastic Tubing for Chemicals
You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures. Tubing has the chemical resistance to withstand a variety of acids and other harsh substances.
Teflon® PFA tubing can handle higher temperatures than fluoropolymer tubing.
Clear tubing allows you to easily monitor flow. Semi-clear tubing gives you a limited view inside the line.
Semi-flexible tubing is good for gradual bends. Rigid tubing will not bend.
Tubing that meets USP Class VI adheres to specifications for material testing; it is not for use in medical applications.
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 55D)
- Temperature Range: -320° to 500° F
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Color | Lengths, ft. | Specifications Met | Per Ft. | |
Metric | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1mm | 3mm | 1mm | 38mm | 1,000 psi @ 72° F | Clear | USP Class VI | 0000000 | 00000 | |
| 2mm | 4mm | 1mm | 38mm | 490 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 3mm | 5mm | 1mm | 44mm | 330 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 4mm | 6mm | 1mm | 44mm | 240 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 5mm | 7mm | 1mm | 50mm | 190 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 6mm | 8mm | 1mm | 63mm | 160 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 7mm | 9mm | 1mm | 63mm | 140 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 8mm | 10mm | 1mm | 63mm | 120 psi @ 72° F | Clear | USP Class VI | 0000000 | 0000 | |
| 10mm | 12mm | 1mm | 101mm | 95 psi @ 72° F | Clear | USP Class VI | 0000000 | 00000 | |
- See table for flexibility
- Compatible with Compression Tube Fittings
- Hard (Durometer 60D)
- Temperature Range: -320° to 500° F
| ID | OD | Wall Thick. | Flexibility | Bend Radius | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/16" | 1/8" | 1/32" | Semi-Flexible | 1/2" | 300 psi @ 72° F | White | 00000000 | 00000 | |
| 1/8" | 3/16" | 1/32" | Semi-Flexible | 1" | 190 psi @ 72° F | White | 00000000 | 0000 | |
| 1/8" | 1/4" | 1/16" | Semi-Flexible | 1/2" | 410 psi @ 72° F | White | 00000000 | 0000 | |
| 5/32" | 1/4" | 3/64" | Semi-Flexible | 3/4" | 225 psi @ 72° F | White | 00000000 | 0000 | |
| 3/16" | 5/16" | 1/16" | Semi-Flexible | 1 1/2" | 240 psi @ 72° F | White | 00000000 | 00000 | |
| 1/4" | 5/16" | 1/32" | Semi-Flexible | 1 3/4" | 110 psi @ 72° F | White | 00000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | Semi-Flexible | 1" | 195 psi @ 72° F | White | 00000000 | 00000 | |
| 3/8" | 7/16" | 1/32" | Semi-Flexible | 4" | 100 psi @ 72° F | White | 00000000 | 00000 | |
| 3/8" | 1/2" | 1/16" | Semi-Flexible | 3 3/4" | 140 psi @ 72° F | White | 00000000 | 00000 | |
| 1/2" | 9/16" | 1/32" | Semi-Flexible | 5 1/2" | 80 psi @ 72° F | White | 00000000 | 00000 | |
| 1/2" | 5/8" | 1/16" | Semi-Flexible | 3" | 110 psi @ 72° F | White | 00000000 | 00000 | |
| 5/8" | 11/16" | 1/32" | Semi-Flexible | 8" | 65 psi @ 72° F | White | 00000000 | 00000 | |
| 5/8" | 3/4" | 1/16" | Semi-Flexible | 8 3/4" | 100 psi @ 72° F | White | 00000000 | 00000 | |
| 3/4" | 13/16" | 1/32" | Semi-Flexible | 10" | 55 psi @ 72° F | White | 00000000 | 00000 | |
| 3/4" | 7/8" | 1/16" | Semi-Flexible | 4" | 100 psi @ 72° F | White | 00000000 | 00000 | |
| 7/8" | 15/16" | 1/32" | Rigid | Not Rated | 35 psi @ 72° F | White | 00000000 | 00000 | |
| 7/8" | 1" | 1/16" | Semi-Flexible | 15 3/4" | 70 psi @ 72° F | White | 00000000 | 00000 | |
| 1" | 1 1/16" | 1/32" | Rigid | Not Rated | 30 psi @ 72° F | White | 00000000 | 00000 | |
| 1" | 1 1/8" | 1/16" | Rigid | Not Rated | 60 psi @ 72° F | White | 00000000 | 00000 | |
High-Purity Hard Plastic Tubing
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 60D)
- Temperature Range: -320° to 500° F
With hard walls and the ability to handle extreme temperatures, this PFA tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it. Tubing meets USP Class VI specifications for material testing; it is not for use in medical applications. It meets UL 94 V-0 for flame retardance, so it delays the spread of flames to valuable equipment. Tubing is clear, so you can easily monitor flow through the line. It is semi-flexible, so it is good for gradual bends.
| ID | OD | Wall Thick. | Max. Pressure | Color | Specifications Met | Lengths, ft. | Per Ft. | |
Clear PFA Plastic | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/16" | 1/8" | 1/32" | 451 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 1/8" | 3/16" | 1/32" | 296 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 0000 | |
| 1/8" | 1/4" | 1/16" | 466 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 0000 | |
| 3/16" | 1/4" | 1/32" | 226 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 311 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 3/8" | 1/2" | 1/16" | 233 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 1/2" | 5/8" | 1/16" | 184 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 5/8" | 3/4" | 1/16" | 155 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 3/4" | 7/8" | 1/16" | 132 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 7/8" | 1" | 1/16" | 117 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
| 1" | 1 1/8" | 1/16" | 75 psi @ 72° F | Clear | USP Class VI, UL 94 V-0, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 | |
Cleaned and Bagged High-Purity Hard Plastic Tubing
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it. Tubing is semi-flexible, so it is good for gradual bends. It is FDA compliant for contact with food.
PFA tubing can withstand a wider temperature range and higher pressures than polypropylene tubing. It is produced in a clean room, so it’s best for applications where sanitation is crucial, such as food processing and pharmaceuticals. Tubing meets NSF/ANSI 51 for food contact. It meets USP Class VI specifications for material testing, but is not for use in medical applications. Tubing meets UL 94 V-0 for flame retardance, so it delays the spread of flames to valuable equipment. It is clear, so you can easily monitor flow through the line.
For technical drawings and 3-D models, click on a part number.
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 60D)
- Temperature Range: -300° to 500° F
- Specifications Met: FDA Compliant 21 CFR 177.1550, NSF/ANSI 51, NSF/ANSI 61, NSF/ANSI 372, UL 94 V-0, USP Class VI
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Max. Vacuum | Color | 1 ft. | 2 ft. | 5 ft. | 10 ft. | 20 ft. | 25 ft. | |
Inch | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/16" | 1/8" | 1/32" | 1/2" | 450 psi @ 72° F | 29 in. of Hg @ 72° F | Clear | 0000000 | ||||||
| 1/8" | 1/4" | 1/16" | 1/2" | 465 psi @ 72° F | 29 in. of Hg @ 72° F | Clear | 0000000 | ||||||
| 1/4" | 3/8" | 1/16" | 1" | 310 psi @ 72° F | 29 in. of Hg @ 72° F | Clear | 0000000 | ||||||
Metric | |||||||||||||
| 4mm | 6mm | 1mm | 44mm | 310 psi @ 72° F | 29 in. of Hg @ 72° F | Clear | 0000000 | ||||||
| 6mm | 8mm | 1mm | 64mm | 235 psi @ 72° F | 29 in. of Hg @ 72° F | Clear | 0000000 | ||||||
| 8mm | 10mm | 1mm | 70mm | 185 psi @ 72° F | 29 in. of Hg @ 72° F | Clear | 0000000 | ||||||
Flexible Duct Hose with Wear Strip for Corrosive Fumes
- Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Gray or Clear; Wear Strip is Silver
- Temperature Range: -65° to 500° F
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
PFA plastic hose is clear so you can see inside your line. It meets UL 94 V-0 for flame retardance. Use with smoke, paint fumes, sodium hydroxide fumes, and sulfuric acid fumes.
For technical drawings and 3-D models, click on a part number.
Spiral | Per Ft. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-24 | 25-Up | |
Clear PFA Plastic | ||||||||||||||
| 3" | 3 5/16" | 4 1/2" | 20% | 3 in. of Hg @ 72° F | 7 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 4" | 4 5/16" | 6" | 20% | 2 in. of Hg @ 72° F | 4 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 00000 | 00000 |
| 5" | 5 5/16" | 7 1/2" | 20% | 2 in. of Hg @ 72° F | 3.6 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 00000 | 00000 |
| 6" | 6 5/16" | 9" | 20% | 2 in. of Hg @ 72° F | 3.5 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 00000 |
| 7" | 7 5/16" | 10 1/2" | 20% | 2 in. of Hg @ 72° F | 3.2 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 8" | 8 5/16" | 12" | 20% | 1 in. of Hg @ 72° F | 3 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 9" | 9 3/16" | 13 1/2" | 20% | 0.5 in. of Hg @ 72° F | 2.1 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 10" | 10 5/16" | 15" | 20% | 1 in. of Hg @ 72° F | 2.2 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 12" | 12 5/16" | 18" | 20% | 1.2 in. of Hg @ 72° F | 2 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 14" | 14 1/4" | 21" | 20% | 0.2 in. of Hg @ 72° F | 2 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |
| 16" | 16 1/4" | 24" | 20% | 0.1 in. of Hg @ 72° F | 1 psi @ 72° F | 0.005" | Ribbed | Left Hand | Metal | UL 94 V-0 | 25 | 00000000 | 000000 | 000000 |