For Testing For Testing |
---|
|
pH Range pH Range |
---|
Concentration Range Concentration Range |
---|
|
Container Type Container Type |
---|
|
More
Check pH levels without a meter. When this testing paper is dipped in a sample, it changes color to indicate pH. Match the color of the testing paper to the color chart to determine the sample’s pH.
pH Range | Numeric Increments | No. of Color Points | Wd. | Lg., ft. | Each | |
0-13.0 pH | 1 | 14 | 1/2" | 50 | 0000000 | 000000 |
1.0-6.0 pH | 1 | 6 | 1/4" | 15 | 0000000 | 0000 |
1.0-11.0 pH | 1 | 11 | 1/2" | 50 | 0000000 | 00000 |
3.0-5.5 pH | 0.5 | 6 | 1/2" | 50 | 0000000 | 00000 |
3.0-9.0 pH | 1 | 7 | 1/2" | 50 | 0000000 | 00000 |
6.0-8.0 pH | 0.4 | 7 | 1/2" | 50 | 0000000 | 00000 |
6.5-13.0 pH | 0.5 | 14 | 1/4" | 15 | 000000 | 0000 |
8.0-9.5 pH | 0.5 | 4 | 1/4" | 15 | 0000000 | 0000 |
10.0-12.0 pH | 0.5 | 5 | 1/4" | 15 | 0000000 | 0000 |
Dip these strips into your liquid to quickly test water conditions. Strips change color to indicate the value reached; match the color of the strip to the color chart on the bottle to interpret the results.
For Testing | Range | No. of Strips | Each | |
Alkalinity Chlorine Hardness pH | Total; 0-240 ppm Free and Total; 0-10 ppm Total; 0-25 gpg 6.2-8.4 pH | 50 | 00000000 | 000000 |
Test for contaminants before installing water-treatment equipment such as boilers and filters. You can also check your pipes and equipment for improper chemical levels that can cause corrosion and scale buildup, shortening their life.
340-test kits include tests for monitoring municipal water, which is often treated with chlorine.
Be prepared for a variety of chemical spills at your worksite.
Kits for ammonia include a liquid neutralizer. Pour or spray the neutralizer onto the spill, even when it's on a vertical surface. The liquid neutralizer binds with the ammonia to form safe organic salts.
Container | |||||
---|---|---|---|---|---|
Spill Cap., gal. | Size, gal. | Type | Includes | Each | |
1.7 | 5 | Plastic Pail | Two 1-gal. Jugs of Liquid Ammonia Neutralizer Two Pairs of Latex Gloves Two Pairs of Boot Covers Two Pairs of Goggles Two Aprons | 0000000 | 0000000 |
Send in samples of your grease, oil, or coolant, and get back a full report on the condition of both your lubricant and equipment. Samples are tested within 24 hours of arrival at the lab, and the results are emailed to you. If the lab discovers critical conditions, they will call you to provide guidance on how to address the problem. Kit includes six bottles with labels, so you can test multiple samples.
Analysis includes ferrography for traces of metal that indicate wear; infrared spectroscopy for soot, nitrogen, and other signs of oxidation; and an elemental analysis for contaminants, such as water or fuel.
Kit for testing coolant with glycol is for coolant used in most engines—it includes a test of the percentage of glycol to make sure there's the right amount in your coolant.
For Testing | Number of Bottles | Bottle Cap., oz. | Tests Included | Includes | Each | |
Coolant | 6 | 4 | Elemental Analysis, Ammonia Concentration, pH Level, Total Dissolved Solids, Flash Point, Fourier-Transform Infrared Spectroscopy, Wear Particle Analytical Ferrography, Varnish Potential, Corrosion by Cast Iron Chip | Equipment Data Sheets (EDS), Sample Bottles, Sample Bottle Labels, Shipping Box | 0000000 | 0000000 |
Coolant with Glycol | 6 | 4 | Elemental Analysis, Ammonia Concentration, Glycol Concentration, pH Level, Concentration by Refractometer, Total Dissolved Solids, Flash Point, Fourier-Transform Infrared Spectroscopy, Wear Particle Analytical Ferrography, Varnish Potential, Corrosion by Cast Iron Chip | Equipment Data Sheets (EDS), Sample Bottles, Sample Bottle Labels, Shipping Box | 0000000 | 000000 |
These kits have everything you need to safely clean up acid and base spills. All kits include sorbents and personal protective equipment. Keep them on hand in labs, warehouses, and other areas where chemicals are used and stored.
The wall-mount metal cabinets guarantee your kits are always in the same spot. Not for use with hydrofluoric acid.
Combination acid and base kits in a plastic pail have pH test strips to detect whether your spill is an acid or a base.
Container | ||||||
---|---|---|---|---|---|---|
Spill Cap., gal. | Size, gal. | Type | Mounting Fasteners Included | Includes | Each | |
For Use With Acids | ||||||
4.5 | 6.5 | Plastic Pail | __ | Ten 15" × 19" Sorbent Pads Two 3" × 48" Sorbent Socks One 2-lb. Shaker Bottle of Powder Acid Neutralizer One Pair of Nitrile Gloves One Pair of Goggles One Scoop Two Disposal Bags | 0000000 | 0000000 |
For Use With Bases | ||||||
4.5 | 6.5 | Plastic Pail | __ | Ten 15" × 19" Sorbent Pads Two 3" × 48" Sorbent Socks One 2-lb. Shaker Bottle of Powder Base Neutralizer One Pair of Nitrile Gloves One Pair of Goggles One Scoop Two Disposal Bags | 0000000 | 000000 |
For Use With Acids, Bases | ||||||
1.5 | __ | Wall-Mount Metal Cabinet | Yes | Five 15" × 18" Sorbent Pads Six 10" × 10" Sorbent Pillows Two 64-oz. Cartons of Granular Sorbent One Pair of Nitrile Gloves One Pair of Latex Boot Covers One Pair of Goggles One Face Shield One Apron One Miniature Broom and Dust Pan Two Disposal Bags | 0000000 | 000000 |
7 | 5 | Plastic Pail | __ | Fifteen 12" × 12" Sorbent Pads Three 3" × 48" Sorbent Socks One 32-oz. Bottle of Liquid Acid Neutralizer One 32-oz. Bottle of Liquid Base Neutralizer One pH Testing Kit One Pair of Nitrile Gloves One Pair of Goggles One Disposal Bag | 0000000 | 000000 |
Refill for Wall-Mount Metal Cabinet Spill-Control Kit | 0000000 | Each | 0000000 |