This film conducts electricity to prevent the buildup of static charges.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.

Polyester absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Carbon mesh is embedded into this clear PVC film to dissipate electrostatic discharge and protect sensitive electronic equipment.

Also called acetate, this is the same clear film that's used in window envelopes.

This wrap conforms to the contours of any item and adheres to itself.

This film has a corrosion inhibitor built-in to shield metal contents from corrosion.

This printed stretch wrap comes on a handle so you can quickly apply a message to packages.

Heat this film to create a form-fitting barrier around single packages and small shipments to protect them from moisture and dirt.

Shield iron, steel, stainless steel and tin from corrosion.

Shield metal from corrosion and block out damaging UV light. A hook-and-loop closure makes these bags easy to seal.

Use these convenient cut shapes to mask holes, fastener heads, and small areas while soldering.

Cover holes, fastener heads, and small areas with these shapes.

Use this solvent-resistant plastic tape for anodizing and electroplating applications.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

Often used for masking vehicles when painting, this extra-wide tape clings to surfaces and seals off the covered area. It comes in a dispenser with a cutting blade.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Use this UV-resistant tape to temporarily protect smooth plastic, metal, and glass surfaces.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.

Outline and draw attention to safety zones and hazards with this tape.

Mark aisles and stairs with a high-contrast reflective strip.

Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. Use it to wrap pipes and electrical conduit both above and below ground.

This tape provides a slick surface along with excellent resistance to electrical current.

A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.

The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.

Use this transparent tape for laminating, splicing, and mounting, even on hard-to-bond plastics. It has adhesive on both sides.

A permanent adhesive on one side of this tape stays put, while a tacky adhesive on the other side lets you open and close bags or reposition signs.

Seal and color-code bagged parts with this tape.

This tape forms a stronger bond than our other packaging tape.

For use in clean rooms, this tape won't leave residue behind.

For refrigerated packing and shipping, this tape sticks even when applied in cold and damp environments.

Get peace of mind when packaging high-value and confidential items—this tape indicates a package has been opened.

Seal boxes with rough or challenging surfaces, such as corrugated and printed cardboard.

Band and bundle heavy, shifting loads with this tape that stretches without breaking.

Make invisible repairs with this clear tape. The weatherproof adhesive won't turn yellow outdoors.

Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.

Patch and connect tarps with this thick, woven plastic tape.

Often used for weatherstripping and sealing gaps around windows, doors, and hatches; this tough tape keeps out moisture, dirt, heat, and cold.

This tape has an aggressive adhesive that adheres to super-slick surfaces, such as plastic and nylon.

Temporarily join rolls of paper and film—this tape won't leave residue behind.

For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.

This chemical-resistant tape has adhesive on both sides.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

Press this optically clear film into place on windows, mirrors, and glass surfaces. When one layer gets scratched or marred, peel it away to expose a new layer.

Keep windows from producing flying glass if they break.

Once heated, this film creates a tight seal around windows to prevent drafts.

Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Resisting heavy impacts and temperatures up to 500° F, these Garolite sheets are used in machinery such as turbine bearings and downpipe gaskets.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

These heaters require a separate temperature switch or controller to regulate heat output.

Cover heavily-used ADA-compliant door handles to help keep them free of germs. These covers are clear in color, so details on the handle show through.

Stay warm during an emergency—these blankets retain 80% of body heat even in rainy and windy conditions.

Patch rips and seal gloves, boots, and respirators to clothing with this chemical-resistant tape.