Designed to meet DIN EN 61340-5-1, these handles reduce static electricity that can damage electronic equipment. Fasten them directly to the front of your surface to open and close a variety of doors and drawers.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. When not in use, the grip folds out of the way.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they’re flush with the mounting surface.

Fasten these knobs directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

A soft textured surface provides a comfortable grip for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

With a minimum surface resistance of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Use these handles as grips on hand wheels and cranks to operate machinery.

An easy-to-grip ball knob makes these handles a good replacement for gear levers. Use them to operate machinery.

Also known as quill-feed handles, these handles engage and disengage with a flick of the wrist to speed machining operations—especially when drilling deep holes.

Use these handles on cans, hoses, ladders, and other objects that weigh up to 30 lbs.

With adhesive at both ends, these plastic strips stick to boxes, bags, and other objects to create a carrying handle.

Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Bonded to the stud is an acrylic adhesive that adds friction to resist loosening from vibration. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery. They mount into a threaded hole.

Made for use in food processing facilities, these plastic knobs have a metal additive that sets off metal detectors if a piece breaks off into your line.

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud.

Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Install them on a threaded stud.

Identify equipment controls and components at a glance by their color. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery.

Like locknuts, these knobs have a nylon insert that grips threads to resist loosening. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery.

Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Use these knobs to display important messages. To build a custom knob or thumb screw, pair one of these knobs with a socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Mount these oval, easy-to-grip ball knobs on a threaded stud. They're good for control levers and push-pull rods.

Tap custom threads or drill a hole in the side of the knob to secure with a set screw. These easy-to-grip ball knobs are good for control levers and push-pull rods.

A rubber coating or construction provides a comfortable grip. Use these knobs to control devices with round or D-shaped shafts and view settings at a glance with a pointer.

These dual-control knobs operate independently to control two settings. They have a rubber coating for a comfortable grip. Use them on devices with round shafts to view settings at a glance with a pointer.

To build a custom precise-control knob or thumb screw, pair one of these knobs with a socket head screw. Turn the knob to move the screw 0.005" per graduation and make precise adjustments.

Tap custom threads or drill a hole in the side of the hub to secure with a set screw. The spoked design allows a better grip around the rim than solid hand wheels to manually adjust valves, presses, and machine components.

Use these crank handles for applications that involve frequent machinery adjustments. They provide leverage to maximize force for turning and tightening.

Replace broken or worn pull cords on machinery and tools, including those on lawn mowers.

Use these cables for high-precision motion control. Tighten the locknut to secure your setting in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance.

These grips are heavy duty vinyl for strength and durability. All are grooved to conform to your fingers for a comfortable, secure grasp.

These grips are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them. All are made of vinyl for strength and durability.

These textured grips provide a slip-resistant grasp.

Place these plastic pellets in hot water until they soften and become pliable. Then mold the material directly to your handle to create a custom grip.

Add or replace worn grips on a variety of irregularly shaped handles and objects. Cut these grips to your desired length with scissors and slide them on your object. Use a heat gun to shrink them tightly in place.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

With a flat inset grip, the handle is recessed to stay out of the way.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.

To open, push in the knob and pull the tab.

When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.

Change the insert to accommodate different files.

Durable and impact resistant, these handles won't split like wood can. Match the handle to the head opening size and shape of your tool.

Made from FDA-listed materials, these rods can be sterilized and are suitable for food and beverage applications. They give you a longer reach and let you add a handle or another extension.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.

Made of aluminum-bronze with a fiberglass handle, these handles inhibit sparking.

Design your own partitions, add to your existing partition, or replace individual components and hardware.

Sets include assorted keys with long shafts that reach into tight spots. The plastic-covered handles provide a good grip for your whole hand.

Sets include an assortment of short keys that fit in tight spaces where others can't.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t.

These assorted keys have a textured grip that provides comfort, slip resistance, and maximum torque. They have a long shaft for reaching into tight spots to turn fasteners.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. The textured grip provides comfort, slip resistance, and maximum torque.

The economical choice, these sets include an assortment of keys with a simple loop handle. The long shaft reaches into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.

These sets include an assortment of keys with a ball end on the long shaft, which allows angled entry to turn screws in hard-to-reach areas. The short shaft provides additional torque.

Use the long shaft for more reach and the short shaft for more torque when turning fasteners.

These assorted keys have an extra-long shaft that provides access to fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.

These assorted keys have a ball-end tip with a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.

Sets include an assortment of keys with a long shaft for more reach and a short shaft for more torque. Use stainless steel keys to protect your stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.

A retaining ring on the tip grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.

These assorted keys have a retaining ring on the tip that grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC and ASTM standards. They have a long shaft that reaches into tight spots to turn fasteners.

Retract the nose by pulling the knob.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.