Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

A wide tip makes good contact in shallow and coated screw recesses, such as those filled with paint.

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

Drive screws with both ends of these bits. Use with hand drivers.

These bits provide a secure grip on the Phillips/slotted combination-drive screws in electrical equipment.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

An opening at the tip accommodates the pin in the recess of tamper-resistant Phillips screws. These are also known as pin-in-head Phillips bits.

While screws with a square/Phillips combination drive can be turned with either a square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.

Sets include an assortment of drivers.

When working in tight spaces, these short drivers fit where others can't.

Sets include an assortment of drivers with a cushioned grip that provides comfort and some slip resistance.

These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with a suede-like textured handle that provides a firm grip, even for oily hands.

Reduce slipping and stripping the screw recess. The tip of these drivers has ribbed grooves that grip the surface of the recess, minimizing the pressure required to achieve maximum torque.

The tips of these assorted drivers have ribbed grooves that grip the surface of the recess to reduce slipping and minimizing the pressure required to achieve maximum torque.

A shaft that extends through the handle and a steel end cap gives these drivers the strength to absorb hammer blows.

Bright-colored handles make these tools stand out so they're less likely to be misplaced.

These assorted drivers have bright-colored handles to stand out so they're less likely to be misplaced.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

Protect your stainless steel screws by using a stainless steel driver. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These drivers eliminate that risk.

The handle on these assorted drivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They're also known as ESD-safe screwdrivers.

Sets include an assortment of stainless steel drivers, which protect stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These drivers eliminate that risk.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Insert a bit into the shaft and a magnet holds it in place.

Lock the bit into the chuck to prevent accidental disengagement.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.

A ratchet mechanism turns fasteners more quickly than a standard bit driver. Insert a bit into the shaft and a magnet holds it in place.

Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.

Remove and replace the reversible shaft to change the tip of the tool. Sets include a handle and multiple shafts.

Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Sets include an assortment of drivers with a tip that can be replaced when it becomes worn. Press the rotating end cap on the handle with your palm to apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips.

Push the handle's end cap to open the jaws at the tip; release to close around the screw. The end cap rotates, allowing you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The assorted drivers in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

A ratchet mechanism turns fasteners more quickly than a standard driver. These screwdrivers have 90° offset tips to provide additional clearance when reaching over obstructions to turn fasteners.

These assorted screw starters have a slim body that reaches into tight spots to grip and turn screws that are hard to reach or too small to hold by hand.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

You only need one tool—slide a different shaft into the handle to change tip size or drive style.

Also known as jewelers' screwdrivers.