Thin wire jaws grasp small or oddly shaped objects.

View, grab, and position objects in hard-to-reach spots. These retrievers have a camera and light at the tip of the flexible shaft and an LCD that displays live video. In addition to picking up objects, they can be used in applications such as installing wiring behind walls and extracting clogs and debris from pipes.

Pick up screws, nuts, and other small steel objects.

An extra-long shaft enables access to material in hard-to-reach areas. These retrievers can pick up heavier objects than our other magnetic retrievers.

LEDs light the magnetized tip for picking up screws, nuts, and other small steel objects in dark areas.

Protect against accidental contact with live electrical circuits. These insulated retrievers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The shaft bends and stays in position to reach objects in awkward spaces.

Bend the shaft to reach objects in awkward spaces.

An extra-long shaft and pivoting head lets you access hard-to-reach material from almost any angle.

Safely push, pull, and clear objects from hard-to-reach places such as conveyors, chutes, and hoppers. With a lightweight handle and plastic head, these removers won’t damage material finishes.

Also known as rescue hooks, these retrievers are often used to pull an injured worker away from electrical hazards without risking the safety of other workers. They have a fiberglass handle and insulated hook to protect against accidental contact with live electrical circuits. The handle is tested to meet the requirements of ASTM F711.

Slip the cable over an object and it locks in place once tightened.

The assorted tools in these sets are used to hold, separate, and position wire, springs, and other small parts.

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

The handles of these assorted picks have a magnet at the end to pick up small steel objects. Use to hold and position wire, springs, and other small parts.

A different tip at each end allows you to install, extract, and position parts with one tool.

Solder won’t stick to these assorted picks, which are used for positioning circuit board components.

These assorted picks have insulated handles that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Avoid nicking or scratching sensitive components. Also known as spudgers, these picks are good for adjusting small wires or separating press-fit plastic components.

The assorted needle-sharp picks in these sets are similar to dental instruments and suitable for work around delicate circuits and components.

A different tip at each end installs and positions tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling.

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to extract material from tight spots.

Shaped for removing the seals around bearings, insert the tip of these tools behind the seal and pull. The curved head provides leverage to remove stuck and stubborn material.

Also known as packing irons, the offset handle allows you to install packing into hard-to-reach areas while the blunt tip prevents accidentally cutting or damaging the packing material.

Sets include an assortment of general purpose tweezers for gripping a variety of objects.

Sets include assorted tweezers with each style a different color for easy identification.

These assorted tweezers hold small parts without the need to apply pressure. Squeeze to open the tips and release to close them.

Lock the tips closed to use these tweezers like a clamp.

A PTFE coating on the tips prevents material from sticking to these tweezers.

Solder won’t stick to these tweezers. Made of titanium for high strength and durability, they are nonmagnetic and have excellent corrosion resistance.

Prevent buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The cushioned grips drain static from your application and provide comfort and heat protection.

Hold small components such as wire, capacitors, and screws in the cylindrical tips.

Sets include an assortment of premium tweezers that are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Sets include an assortment of tweezers used to remove chips and other delicate components from circuit boards.

Keep your tweezers organized in these partitioned cases.

Solder won’t stick to these tweezers. Made of titanium for high strength and durability, they are nonmagnetic and have excellent corrosion resistance. These premium tools are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Designed for placing chips and electronic components on circuit boards, these tweezers have rectangular-shaped tips that are angled to reach over and around obstructions. They are also known as SMD (surface-mount device) tweezers.

Remove chips and other delicate components from circuit boards.

Also known as hemostats, these tongs enable intricate work in tight spaces and the jaws can be locked closed. The handle has interlocking teeth that allow you to adjust the clamping pressure.

Keep hands away from machinery—use these lightweight tools to pick up and hold parts. The pliers-style handles provide more comfort and control than standard tongs.

Get a firm grip on beakers and other containers in the curved jaws. You can also use the tips of these tongs to pick up small objects.

Slide steel plates and blocks off a stack.

This lifter has a quiet continuous-vacuum system.

A built-in pump generates more suction for lifting and holding heavier items than push-grip lifters.

Move large, heavy sheets of plywood, fiberboard, cement board, and drywall with these nonmarring lifters. Unlike suction-cup and magnetic lifters, they will hold porous and nonmagnetic sheets.

The needles on these grippers grab hold of flexible and porous items that are difficult for vacuum cups and magnetic grippers to grasp, such as fabric, foam, glass and metal fiber, and carpet.

These grippers pick up a product and turn it 90° or 180° before releasing.

Build a complete robot gripping tool using these grippers, fingers, and robot tool mounts.

Including a robot tool mount and electrical connectors, these grippers come ready to attach to robot arms with standard ISO 50 mounting hole patterns. Good for areas without compressed air, they use electricity to pick and place items in packaging, assembly, and machine-tending applications.

Raise, transport, tilt, and drain full drums using the hook of a crane or hoist.

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° to lift vertically. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Use these clamps to raise a metal plate straight up from its original vertical position.

Pads on these clamps prevent the grip from biting into the load.

Pull the on/off handle to engage and release the magnet.

These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms.

These all-in-one lifters include a rubber vacuum cup and a device to generate suction without an installed vacuum system.

With multiple suction ports, these lifters can grip, lift, and move large items with a variety of surfaces.

These lifters have multiple cups to grip, lift, and move large food items as well as other objects with curves, angles, and varied heights in food-processing plants. All of the cups are made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Connect these pads to your vacuum system to lift and move textured items that standard vacuum cups can’t pick up.

With no legs in front, these cranes let you lift close to your load. They are also known as engine cranes, and have a hydraulic hand pump that raises and lowers the arm (boom) to lift items without the need for a hoist.

Adjust the vertical clearance and horizontal span to suit your needs.

These cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Able to cover a larger work area than rotating cranes, these allow you to position your load anywhere inside the four posts.

Install these cranes with anchor bolts set in a reinforced-concrete foundation.

Designed to save valuable floor space, these cranes mount to structural columns.

Also known as davit cranes, these lift objects out of holes such as sewers.

Attach these cups to threaded connections on your vacuum system to gently lift bags, plastic film, and other sanitary wrappings.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

The bellows on these cups handle items with varied heights and angles better than flat cups.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Lift smooth items, such as glass, plastic, and sheet metal without leaving marks.

Protect static sensitive materials, such as electronics, with these cups that diffuse static buildup.

These cups are made of FDA listed silicone rubber to withstand the extreme temperatures in food processing applications.

The bellows on these cups handle items with varied heights and angles better than flat cups.

Press these cups onto unthreaded fittings on your vacuum system to pick up bread, pastries, and other soft material.

Press these cups onto unthreaded fittings on your vacuum system to pick up sanitary items with curves, corners, and uneven surfaces.

These finger blanks come ready to mount to SMC or Schunk grippers, so you can make custom fingers without starting from scratch. Just machine the blank’s gripping end to create fingers that will securely grip your specific parts.

Position the face of these magnets in direct contact with a flat metal surface and turn on the power to create a magnetic hold.

For use with a wide range of threaded hole diameters, these sets include multiple retrievers. Insert the retriever into a tapped hole and pull out to remove chips.

These trucks let you lift, transport, and place drums without a forklift.

A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying

The arms on these drum movers automatically close and lock around the side of a drum when lifted with a forklift.