Number of Poles Number of Poles | Show |
|---|
|
Type Type |
|---|
 |  |
| Plug | Socket |
 | |
| Receptacle |
Wire Connection Type Wire Connection Type |
|---|
|
Housing Connection Type Housing Connection Type |
|---|
|
System of Measurement System of Measurement |
|---|
|
Shape Shape |
|---|
| Straight |
Specifications Met Specifications Met |
|---|
|
Connector Shell Size Connector Shell Size |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Environmental Rating Environmental Rating |
|---|
Housing Finish Housing Finish |
|---|
|
Housing Material Housing Material |
|---|
|
Environment Environment |
|---|
|
For Panel Cutout Diameter For Panel Cutout Diameter |
|---|
|
For Maximum Cable OD For Maximum Cable OD |
|---|
|
Mil. Spec. Compatible Connectors
Connectors secure with a quarter turn when mated, yet unlock and pull apart with minimal force. All have the same pin and socket configurations as MIL-DTL-26482, so they are compatible with other products that meet the same standard. They’re rated IP67 to protect against washdowns. When mating connectors, the gender and housing lock location must be opposite.
Crimpers (sold separately) are required for wire installation.
For technical drawings and 3-D models, click on a part number.
Multipurpose Build-Your-Own Latching Connectors
Combine power, USB, computer, and compressed air inserts to build a connector that sends signal, power, and data. A complete connector requires a hood, a base, two frames, and a male and female insert for each slot in the frame. The frames fit into the hood and base, and the inserts snap into the frame. Select components based on the number of slots needed. Once assembled, connectors are rated NEMA 4 and 12 for protection against dirt, washdowns, and oil/coolant dripping.
For technical drawings and 3-D models, click on a part number.
