Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Retract the nose by pulling the knob.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Thread onto machinery or attach a knob or handle to the threaded spindle.

A T-handle makes these spring plungers easy to grip.

An L-handle takes up less space than a T-handle.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

Two holes in the plate allow these plungers to be mounted to a flat surface.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Slide the bolt and drop the knob into the notch to secure.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

The mounting screws on these latches are concealed to prevent tampering.

These padlockable latches are reversible for right- and left-hand mounting.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

Choose these locks if you need several locks that open with the same key.