McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    56 Products

    Bent-Head Clevis Pins
    3D CAD models available

    Slightly curved, these pins take up less space than a loop grip or T-handle while still giving you something to grab. The bent head also acts as a stop so the pin can’t be pulled out from the other end. To secure, slide a cotter pin into the hole.
    Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Bent-Head Clevis Pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    Min.
    Hardness
    Each
    Zinc-Plated Carbon Steel with Cotter Pin
     
    5/16" Diameter
    2 1/2"-0.003" to 0.000"7/64"Not Rated00000000000000
    3"-0.003" to 0.000"7/64"Not Rated0000000000000
     
    3/8" Diameter
    2 1/2"-0.003" to 0.000"7/64"Not Rated0000000000000
    3"-0.003" to 0.000"7/64"Not Rated0000000000000
    3 1/2"-0.003" to 0.000"1/16"Not Rated0000000000000
    4"-0.010" to 0.000"1/8"Not Rated0000000000000
     
    1/2" Diameter
    2 1/2"-0.010" to 0.000"1/8"Not Rated0000000000000
    3"-0.010" to 0.000"1/8"Not Rated0000000000000
    4"-0.010" to 0.000"9/64"Not Rated0000000000000
    4 1/2"-0.003" to 0.000"1/8"Not Rated0000000000000
    5"-0.003" to 0.000"7/64"Not Rated0000000000000
    6"-0.003" to 0.000"1/8"Not Rated0000000000000
    8"-0.003" to 0.000"1/8"Not Rated0000000000000
     
    5/8" Diameter
    3"-0.010" to 0.000"9/64"Not Rated0000000000000
    4"-0.010" to 0.000"3/32"Not Rated0000000000000
    5"-0.003" to 0.000"7/64"Not Rated0000000000000
    6"-0.003" to 0.000"9/64"Not Rated00000000000000
    8"-0.003" to 0.000"9/64"Not Rated00000000000000
     
    3/4" Diameter
    3 1/2"-0.010" to 0.000"9/64"Not Rated0000000000000
    4 1/2"-0.010" to 0.000"9/64"Not Rated0000000000000
    5"-0.003" to 0.000"9/64"Not Rated00000000000000
    6"-0.003" to 0.000"9/64"Not Rated00000000000000
    8"-0.003" to 0.000"9/64"Not Rated00000000000000
    10"-0.003" to 0.000"9/64"Not Rated00000000000000
     
    1" Diameter
    4 3/4"-0.010" to 0.000"11/64"Not Rated00000000000000
    5"-0.003" to 0.000"11/64"Not Rated00000000000000
    6"-0.003" to 0.000"11/64"Not Rated00000000000000
    6 3/4"-0.010" to 0.000"11/64"Not Rated00000000000000
    8"-0.003" to 0.000"11/64"Not Rated00000000000000
    10"-0.003" to 0.000"11/64"Not Rated00000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Bent-Head Clevis Pins.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    Min.
    Hardness
    Passivation
    Each
    18-8 Stainless Steel with Cotter Pin
     
    3/8" Diameter
    3"-0.003" to 0.000"3/32"Rockwell B83Unpassivated00000000000000
     
    1/2" Diameter
    3"-0.003" to 0.000"5/32"Rockwell B83Unpassivated00000000000000
    4"-0.003" to 0.000"5/32"Rockwell B83Unpassivated00000000000000
    5"-0.003" to 0.000"5/32"Rockwell B83Unpassivated00000000000000
     
    5/8" Diameter
    3"-0.003" to 0.000"13/64"Rockwell B83Unpassivated00000000000000
    4"-0.003" to 0.000"13/64"Rockwell B83Unpassivated00000000000000
    5"-0.003" to 0.000"13/64"Rockwell B83Unpassivated00000000000000
     
    3/4" Diameter
    3 1/2"-0.003" to 0.000"13/64"Rockwell B83Unpassivated00000000000000
    4 1/2"-0.003" to 0.000"13/64"Rockwell B83Unpassivated00000000000000
     

    Selectable-Length Bent-Head Clevis Pins
    3D CAD models available

    Change the usable length in 1/4" increments by inserting a cotter pin into one of the holes. These pins are often used as replacement parts when you don't have the exact pin you need on hand. The bent head gives you a better grip than flat-head pins and acts as a stop so the pin can’t be pulled out from the other end.
    The excess length can be cut off after installation.
    Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Bent-Head Clevis Pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia.
    Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Each
    Zinc-Plated Carbon Steel with Cotter Pin
     
    3/8" Diameter
    2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4"-0.005" to 0"5/32"7Not Rated4"00000000000000
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"0000000000000
     
    1/2" Diameter
    2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4"-0.005" to 0"5/32"7Not Rated4"0000000000000
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"0000000000000
     
    5/8" Diameter
    2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4"-0.005" to 0"13/64"7Not Rated4"0000000000000
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"0000000000000
     
    3/4" Diameter
    2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4"-0.005" to 0"13/64"7Not Rated4"0000000000000
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"00000000000000
     
    1" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"00000000000000
    6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8"-0.005" to 0"13/64"7Not Rated8"00000000000000
     
    1 7/32" Diameter
    6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8"-0.005" to 0"13/64"7Not Rated8"00000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Bent-Head Clevis Pins.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg.
    Dia.
    Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Passivation
    Each
    18-8 Stainless Steel with Cotter Pin
     
    1/2" Diameter
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"Unpassivated000000000000000
     
    5/8" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"Unpassivated00000000000000
     
    3/4" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"Unpassivated00000000000000
     

    Padlockable Bent-Head Clevis Pins
    3D CAD models available

    Prevent anyone without the key or combination from removing these pins. Often used to safeguard trailers against theft, they’re slightly curved so they can’t be pulled out from the other end. Add your own padlock to secure.
    Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Padlockable Bent-Head Clevis Pins.
    Corrosion-Resistant-Coated Carbon Steel—These pins combine the strength of steel with the rust resistance of stainless steel. Also known as black luster, the finish has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Shackle
    Dia.
    Min.
    Hardness
    Each
    Black Corrosion-Resistant-Coated Carbon Steel
     
    5/8" Diameter
    3"-0.005" to 0.005"5/16"Rockwell B80000000000000000
    4"-0.005" to 0.005"5/16"Rockwell B8000000000000000
     
    3/4" Diameter
    4 1/2"-0.005" to 0.005"5/16"Rockwell B8000000000000000
     
    back to top