Core Pins
Mold plastic around these pins to form small holes, or use them to perforate parts. They have a flat head to fit into a counterbored hole. Pins can be machined to fit your application. They're precision-ground to tight tolerances.
M2 tool steel pins resist wear and stay sharp at high temperatures.
For technical drawings and 3-D models, click on a part number.
Head | ||||||
---|---|---|---|---|---|---|
Dia., mm | Dia. Tolerance, mm | Dia., mm | Ht., mm | Min. Hardness | Each | |
63 mm Lg. | ||||||
5.500 | 0 to 0.008 | 8 | 5 | Rockwell C60 | 000000000 | 000000 |
Ejector Pins
Also known as knockout and forged pins, use these pins to push parts out of molds. Pins are precision-ground to tight tolerances and hardened for strength and wear resistance. Machining is not recommended.
H13 tool steel pins resist rapid changes in temperature.
M2 tool steel pins withstand high temperatures.
Metric pins meet DIN 1530 specifications.
For technical drawings and 3-D models, click on a part number.
Head | 160 mm Lg. | |||||
---|---|---|---|---|---|---|
Dia., mm | Dia. Tolerance, mm | Dia., mm | Ht., mm | Min. Hardness | Each | |
5.5000 | -0.008 to -0.002 | 10 | 3 | Rockwell C41 | 000000000 | 00000 |
Head | ||||||
---|---|---|---|---|---|---|
Dia., mm | Dia. Tolerance, mm | Dia., mm | Ht., mm | Min. Hardness | Each | |
100 mm Lg. | ||||||
5.5000 | -0.012 to -0.004 | 10 | 3 | Rockwell C60 | 000000000 | 000000 |
125 mm Lg. | ||||||
5.5000 | -0.012 to -0.004 | 10 | 3 | Rockwell C60 | 000000000 | 00000 |
160 mm Lg. | ||||||
5.5000 | -0.012 to -0.004 | 10 | 3 | Rockwell C60 | 000000000 | 00000 |
200 mm Lg. | ||||||
5.5000 | -0.012 to -0.004 | 10 | 3 | Rockwell C60 | 000000000 | 00000 |