McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    18 Products

    Thread-In Quick-Release Pin Receptacles

    Image of Product. Front orientation. Quick-Release Pin Receptacles. Thread-In Quick-Release Pin Receptacles.
    Image of Attribute. Front orientation. Contains Annotated. Thread-In Quick-Release Pin Receptacles.
    Use a screwdriver to install these receptacles in a threaded hole. Use them to secure quick-release pins when you can't drill a through hole. They're made of 18-8 stainless steel for a balance of strength and corrosion resistance, and passivated for added protection against corrosion and oxidation.
    For Pin
    Dia.
    Barrel
    OD
    Overall
    Lg.
    Usable Lg.
    Reduction
    Thread
    Size
    Material
    Passivation
    Each
    Round Mounting Flange
    5/8"1"15/16"1/4"1"-14
    		18-8 Stainless Steel
    		Passivated94715A301000000
     

    Forklift Hitch Receivers

    Image of ProductInUse. Towing Adapter with Bumper Insert. Front orientation. Forklift Hitch Receivers.
    Image of Product. Front orientation. Forklift Hitch Receivers.

    Towing Adapter with Bumper Insert

    Image of Specification. Front orientation. Contains Annotated.
    Modify your forklift to tow machines, trailers, and disabled vehicles. These adapters have a hitch receiver that works with hitch inserts, mounting plate inserts, drawbar couplers, and other towing connectors. Lock adapters in place with a connecting pin behind each fork, then wrap the chain around your carriage.
    Hitch
    Receiver
    Fork
    Pockets
    For
    Max. Fork
    Overall
    Mounting Hole
    Wt. Cap.,
    lb.
    Size
    For Hitch Ball
    Thread Size
    No.
    of
    Spacing
    Ctr.-to-Ctr.
    Wd.
    Ht.
    Lg.
    Wd.
    Ht.
    Dia.
    Ctr.-to-Ctr.
    (A)
    Ctr.-to-Ctr.
    (B)
    Forklift Attachment
    Type
    Material
    Color
    Each
    4,0002" Square1"-14
    		224"5"2"46"30 11/16"6"19/32"3 3/8"1 3/4"Hook and Chain, PinPowder-Coated SteelBlue9114N110000000
    Bumper Inserts
    Image of Product. Front orientation. Hitch Inserts.
    Add bumper inserts to these adapters to push equipment instead of pulling it. The bumper is rubber, so it won’t scratch surfaces.
    Hitch Receiver
    Size
    Overall
    Lg.
    Overall
    Wd.
    Overall
    Ht.
    Material
    Base Material
    Base
    Color
    Each
    2" Square14 1/16"30 3/16"6 1/2"Rubber
    		Powder-Coated SteelYellow9114N120000000

    Hitch Kits

    Image of System. Front orientation. Exploded view. Contains Annotated, Border. Hitch Kits.
    Image of Product. Kit with Cotter Pin. Front orientation. Hitch Kits. Cotter.
    Image of Product. Kit with Locking Pin. Front orientation. Hitch Kits. Locking.

    Kit with Cotter Pin

    Kit with Locking Pin

    Everything you need to attach a hitch to your vehicle's receiver—these kits include a hitch insert, ball, and pin. To match the height of your trailer, you can flip them over to raise or drop the ball. The ball in these kits connects with hitch-ball couplers on trailers.
    Locking—Kits with a locking hitch pin prevent your hitch from getting stolen—you can't pull the hitch insert out without the key. A dust cap keeps debris out of the locking mechanism.
    For Maximum Trailer Weight—Maximum trailer weight is the total weight being towed.
    Vertical Capacity—Vertical capacity (also known as tongue weight) is the weight of the load on the hitch ball.
    Hitch
    Ball
    Hitch
    Pin
    For Max. Trailer
    Wt., lb.
    Vert. Cap.,
    lb.
    Drop
    Ht.
    Rise
    Ht.
    Overall
    Dp.
    For Hitch Receiver
    Size
    No. of Hitch
    Balls Included
    Dia.
    Material
    Thread
    Size
    Stud
    Lg.
    Dia.
    Lg.
    Keying
    No. of Keys
    Included
    Each
    Cotter
    6,0006002"3/4"11 1/2"2" × 2" Square12"Chrome-Plated Steel1"-14
    		2"5/8"2 7/8"——9012N11000000
     
    Locking
    6,0006002"3/4"13 1/4"2" × 2" Square12"Chrome-Plated Steel1"-14
    		2"5/8"3 1/4"Keyed Differently29012N1200000
     

    Hitch Inserts

    Image of System. Insert Shown with Hitch-Ball Components. Front orientation. Exploded view. Contains Annotated, Border. Hitch Inserts. Hitch Inserts.

    Insert Shown with Hitch-Ball Components

    Use these inserts in hitch-ball connections for towing. They fit into a receiver that's attached to a vehicle. Maximum trailer weight is the total weight being towed. Vertical capacity (also known as tongue weight) represents the weight of the load on the hitch ball.
    Height Adapters for Hitch Balls
    Image of Product. (Shown in Drop Position). Front orientation. Contains Annotated. Hitch Inserts. Hitch Inserts, Height Adapters for Hitch Balls.
    Image of Product. (Shown in Raise Position). Bottom orientation. Contains Annotated. Hitch Inserts. Hitch Inserts, Height Adapters for Hitch Balls.

    (Shown in Drop Position)

    (Shown in Raise Position)

    Height adapters for hitch balls raise or drop the ball to the height that works for your trailer. From the drop position, rotate the adapter 180° to achieve the raise position.
    Stainless Steel— Adapters made from stainless steel offer the most long-term corrosion resistance.
    For Max. Trailer
    Wt., lb.
    Vert. Cap.,
    lb.
    Drop
    Ht.
    Rise
    Ht.
    Overall
    Dp.
    For Hitch
    Receiver Size
    For Hitch Ball
    Thread Size
    Each
    Powder-Coated Steel
    6,0006002"3/4"12"2" Square1"-14
    		2507T21000000
    6,0006004"2 3/4"12 1/4"2" Square1"-14
    		2507T2200000
     
    Stainless Steel
    6,0006002"3/4"11 3/4"2" Square1"-14
    		7765T10100000
     
    Height Adjusting Adapters for Hitch Balls
    Image of Product. (Shown in Drop Position). Front orientation. Contains Annotated. Hitch Inserts. Hitch Inserts, Height Adjusting Adapters for Hitch Balls.
    Image of Product. (Shown in Raise Position). Bottom orientation. Contains Annotated. Hitch Inserts. Hitch Inserts, Height Adjusting Adapters for Hitch Balls.

    (Shown in Drop Position)

    (Shown in Raise Position)

    For Max. Trailer
    Wt., lb.
    Vert. Cap.,
    lb.
    Max. Drop
    Ht.
    Max. Rise
    Ht.
    Ht. Adjustment
    Increments
    Overall
    Dp.
    For Hitch
    Receiver Size
    For Hitch Ball
    Thread Size
    Each
    Powder-Coated Steel
    6,00060011"9 3/4"2"12"2" Square1"-14
    		7765T54000000
    10,0001,00011"9 3/4"2"12"2" Square1"-14
    		7765T53000000
     

    Hitch Balls

    Image of Product. Front orientation. Contains Annotated. Hitch Balls.
    Mount these onto a hitch insert, and connect them to a trailer with a hitch-ball coupler. Maximum trailer weight is the total weight being towed.
    For Max. Trailer
    Wt., lb.
    Hitch Ball
    Dia.
    Thread
    Size
    Stud
    Lg.
    Each
    Chrome-Plated Steel Hitch Balls
    5,0002"1"-14
    		2 1/8"8785T5000000
    6,0002 5/16"1"-14
    		2"8785T2200000
     
    Stainless Steel Hitch Balls
    8,2002"1"-14
    		1 3/4"8785T8200000
    8,2002 5/16"1"-14
    		1 3/4"8785T9800000
     

    Go/No-Go Threaded Plug Gauges with Handle

    Speed up thread tolerance checks—the handle on these gauges gives you a good grip to quickly thread and unthread go or no-go gauges. Use these gauges to make sure nuts, tapped holes, and other parts fall within tolerance. All are precisely manufactured to confirm thread fit. If the plug gauges wear down, you can insert new ones (not included) onto the taperlock handle.
    A part is within tolerance if it’s easy to thread the go gauge into the part but difficult to thread the no-go gauge more than two turns.
    Go/no-go gauges have both a go gauge on one end of the handle and a no-go gauge on the other to speed up tests. Go gauges check the minimum internal thread size. No-go gauges check the maximum internal thread size.
    Class X Gauge
    Image of Product. Double-Ended Taperlock Handle. Front orientation. Plug Gauges. Go/No-Go Threaded Plug Gauges with Handle.

    Double-Ended Taperlock

    Handle

    Accuracy Certificate Traceable to NIST—Gauges with an accuracy certificate traceable to NIST include verification from the manufacturer that their thread sizes are within tolerance. The certificate is also known as a certificate of compliance or a short-form certification.
    Calibration Certificate Traceable to NIST—Gauges with a calibration certificate traceable to NIST were calibrated in a lab. The certificate, sometimes called a test report or long-form certificate, details the tested measurements.
    For Class 2B Unified Standard Thread Fit—For inch threads, the higher the class number, the tighter the fit. Unified Standard Class 2B is standard and works for most applications.
    For Thread Fit—Thread fit designates the tightness or looseness of mating threads.
    Thread
    Size
    Thread
    Type
    Pitch Dia.
    Tolerance
    Hardness
    Material
    Features
    Choose a Thread Fit
    Each
    Go/No-Go Gauges with Accuracy Certificate Traceable to NIST
    1"-14
    		UNS
    		-0.0003" to 0.0003"Rockwell C70Chrome-Plated Tool SteelDouble-Ended Taperlock HandleUnified Standard Class 2B, Unified Standard Class 3B2366A3180000000
     
    Go/No-Go Gauges with Calibration Certificate Traceable to NIST
    1"-14
    		UNS
    		-0.0003" to 0.0003"Rockwell C70Chrome-Plated Tool SteelDouble-Ended Taperlock HandleUnified Standard Class 2B, Unified Standard Class 3B3157A75000000
     

    Hydraulic Cylinder Clevis Rod Ends

    Image of System. Clevis Rod Ends. Front orientation. Hydraulic Cylinder Mounts. Hydraulic Cylinder Clevis Rod Ends.
    Image of Product. Front orientation. Hydraulic Cylinder Mounts. Hydraulic Cylinder Clevis Rod Ends.
    Image of Attribute. Front orientation. Contains Annotated. Hydraulic Cylinder Clevis Rod Ends.

    Clevis Rod Ends

    Connect a clevis rod end to a hydraulic cylinder to create a bend or pivot. Use these with pivot brackets and clevis pins (each component sold separately). They’re also known as yoke-end linkages.
    Stainless Steel—Stainless steel clevis rod ends are more corrosion resistant than steel clevis rod ends in wet environments.
    Overall
    Shank
    For Bore
    Dia.
    For Pin
    Dia.
    Jaw Opening
    Wd.
    Shank Ctr.
    Lg.
    Wd.
    Lg.
    Ht.
    Thread
    Size
    Gender
    Threading
    For Hydraulic Cylinder
    Mounting Pattern
    Each
    Steel
    3 1/4"1"1 1/2"3 1/8"3"4 1/8"2"1"-14
    		FemaleFully ThreadedNFPA Light Duty, NFPA/JIC Heavy Duty62205K390000000
     
    Stainless Steel
    —1"1 1/2"3 1/8"3"4 1/8"2"1"-14
    		FemaleFully ThreadedNFPA Light Duty, NFPA/JIC Heavy Duty6043N13000000
     
    back to top