Pipe Adapters | McMaster-Carr

	Pipe Size Pipe Size

1/16
1/8
1/4
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12

	Thread Type Thread Type

UN/UNF (SAE Straight)

	Type Type


Adapter	Reducing Adapter

Bushing	Connector

Reducer	Pipe

Flange	Union

Plug	Stub End

Clamp	Outlet

Cap	Saddle Tap

O-Ring	Nut

Bleed Ring	Port

Trap

	Material Material

Glass-Filled PVC Plastic

	Shape Shape


Straight	90° Elbow

Tee	Cap/Plug

45° Elbow	Round

Manifold	Hex

Wye	Cross

Junction Block	Cut-to-Angle Elbow

11 1/4° Elbow	Side-Outlet Elbow

22 1/2° Elbow	60° Elbow

70° Elbow	180° Bend

270° Bend	Crossover

Double 90° Elbow	Double Wye

Z

	Connection Style Connection Style

	For Use With For Use With

Dichlorotetrafluoroethane

Hydrochloric Acid (30%)

Silicon Tetrafluoride

	Gender Gender

Male

Female

	Connection Type Connection Type

	System of Measurement System of Measurement

Inch

Metric

	Length Length

	Maximum Pressure Maximum Pressure

	For Pipe Material For Pipe Material

	For Tube OD For Tube OD

	Schedule Schedule


10	40

80	160

XXH

	Threading Threading

Threaded on Both Ends

Fully Threaded

Threaded on One End

Unthreaded

	For Pipe Schedule For Pipe Schedule

160

XXH

Any

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	Specifications Met Specifications Met

	Body Shape Body Shape

	Pressure Class Pressure Class

125
150
200
250
300
600
1000
1500
3000
6000
Not Rated

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

41,184 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

Low-Pressure Stainless Steel Threaded Pipe Fittings

Use these corrosion-resistant fittings in a low-pressure pipe line.

Standard-Wall Stainless Steel
Threaded Pipe Nipples and Pipe

Typically used with low-pressure stainless steel threaded pipe fittings.

Premium Low-Pressure Stainless Steel
Threaded Pipe Fittings with Certification

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Low-Pressure Stainless Steel Threaded Pipe Flanges

Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Low-Pressure Stainless Steel
Threaded Pipe Fittings with Sealant

The male threads on these fittings have a sealant applied for extra leak protection.

Standard-Wall Stainless Steel Threaded
Pipe Nipples and Pipe with Sealant

Typically used with low-pressure stainless steel threaded pipe fittings.

Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Precision Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Medium-Pressure Stainless
Steel Threaded Pipe Fittings

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Miniature Medium-Pressure Stainless
Steel Threaded Pipe Fittings

When space is at a premium choose these compact fittings.

High-Pressure Stainless Steel Threaded Pipe Fittings

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Thick-Wall Stainless Steel
Threaded Pipe Nipples and Pipe

Typically used with medium- to high-pressure stainless steel threaded pipe fittings.

High-Pressure Stainless Steel Threaded Pipe Flanges

Also known as ANSI flanges.

High-Pressure Stainless Steel
Threaded SAE Pipe Flanges

Also known as Code 61 SAE hydraulic flanges.

High-Pressure Stainless Steel
Threaded SAE Two-Piece Pipe Flanges

Also known as Code 61 SAE hydraulic flanges, these let you create an access point in a high-pressure hydraulic line.

Stainless Steel Unthreaded Pipe and Pipe Fittings

Standard-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Low-Pressure Stainless Steel Unthreaded Pipe Flanges

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Standard-Wall Stainless Steel
Unthreaded Pipe Nipples and Pipe

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Low-Pressure Press-Connect Stainless
Steel Unthreaded Pipe Fittings

Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat.

Low-Pressure Socket-Connect Stainless
Steel Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Low-Pressure Stainless Steel Bleed Rings

Create an access point in systems operating up to 230 psi where corrosion is a concern. Made of stainless steel, these bleed rings resist rusting.

Thin-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Thin-Wall Stainless Steel Unthreaded Pipe

Typically used with thin-wall stainless steel unthreaded pipe fittings.

High-Pressure Socket-Connect
Stainless Steel Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Thick-Wall Stainless Steel Unthreaded Pipe

Typically used with thick-wall and high-pressure stainless steel unthreaded pipe fittings.

Thick-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

High-Pressure Stainless Steel Unthreaded Pipe Flanges

Use these heavy duty forged flanges for high-pressure applications.

High-Pressure Stainless Steel
Unthreaded SAE Pipe Flanges

Also known as Code 61 SAE hydraulic flanges.

High-Pressure Stainless Steel Bleed Rings

To relieve pressure, siphon liquid, or take samples in lines where corrosion is a concern, these bleed rings act as a port between two pipe flanges in systems operating up to 1,200 psi. They're stainless steel, so they resist rusting.

Extreme-Pressure Socket-Connect
Stainless Steel Unthreaded Pipe Fittings

The strongest socket-connect fittings we offer, these heavy duty forged fittings are also known as Pressure Class 6000.

Extra-Thick-Wall Stainless Steel Unthreaded Pipe

Typically used with extreme-pressure stainless steel unthreaded pipe fittings.

Brass and Bronze Threaded Pipe and Pipe Fittings

High-Pressure Brass Threaded Pipe Fittings

These brass fittings have the strength to handle high-pressure applications.

High-Pressure Brass Threaded Pipe Nipples and Pipe

Typically used with high-pressure brass and bronze threaded pipe fittings.

High-Pressure Brass Threaded
Pipe Fittings with Sealant

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

High-Pressure Brass Threaded
Pipe Nipples and Pipe with Sealant

Typically used with high-pressure brass and bronze threaded pipe fittings.

High-Pressure Brass Threaded
Pipe Fittings for Drinking Water

Use these heavy-duty brass fittings for high-pressure drinking water applications.

High-Pressure Brass Threaded Pipe
Nipples and Pipe for Drinking Water

Typically used with high-pressure brass and bronze threaded pipe fittings.

High-Pressure Plated Brass Threaded Pipe Fittings

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

High-Pressure Plated Brass
Threaded Pipe Nipples and Pipe

Typically used with high-pressure brass and bronze threaded pipe fittings.

Miniature High-Pressure Brass Threaded Pipe Fittings

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

Easy-Install High-Pressure Brass Threaded Pipe Fittings

Install and remove these high-pressure brass fittings with a socket wrench or hex key (sold separately).

Low-Pressure Brass and Bronze Threaded Pipe Fittings

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Standard-Wall Brass Threaded Pipe Nipples and Pipe

Typically used with low-pressure brass and bronze threaded pipe fittings.

Low-Pressure Brass and
Bronze Threaded Pipe Flanges

Also known as Pressure Class 150 flanges, these brass flanges are designed for low-pressure applications.

Low-Pressure Brass Threaded
Pipe Fittings with Sealant

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

Standard-Wall Brass Threaded
Pipe Nipples and Pipe with Sealant

Typically used with low-pressure brass and bronze threaded pipe fittings.

Miniature Low-Pressure Brass Threaded Pipe Fittings

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

Low-Pressure Plated Brass Threaded Pipe Fittings

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Standard-Wall Chrome-Plated Brass
Threaded Pipe Nipples and Pipe

Typically used with low-pressure brass and bronze threaded pipe fittings.

Medium-Pressure Plated Brass Threaded Pipe Fittings

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Medium-Pressure Brass and
Bronze Threaded Pipe Fittings

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

Thick-Wall Brass Threaded Pipe Nipples and Pipe

Typically used with medium-pressure brass and bronze threaded pipe fittings.

Precision Extreme-Pressure
Brass Threaded Pipe Fittings

Also known as instrumentation fittings, these have the most precise threads and the tightest tolerances of all the brass pipe fittings we offer.

Precision Extreme-Pressure Brass
Threaded Pipe Nipples and Pipe

Typically used with precision extreme-pressure brass and bronze threaded pipe fittings.

Extreme-Pressure Brass Threaded Pipe Fittings

Extreme pressures are no problem for these heavy-duty brass fittings.

Brass and Bronze Unthreaded Pipe and Pipe Fittings

Brass and Bronze Unthreaded Pipe Flanges

Bolt these flanges to another same-size flange with a gasket to create an access point within a pipe line. They are also known as Silbraze flanges.

Standard-Wall Brass Unthreaded Pipe

Typically used with brass and bronze unthreaded pipe fittings.

Bronze Unthreaded Pipe Fittings

Also known as Silbraze fittings.

Low-Pressure Iron and Steel Threaded Pipe and Pipe Fittings

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

Standard-Wall Steel Threaded Pipe Nipples and Pipe

Also known as Schedule 40, this steel pipe is designed for low-pressure applications.

Standard-Wall Steel Pipe Nipples and Pipe
with Right-Hand and Left-Hand Threads

Pipe has clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end. When you use a wrench to turn, connections on both ends tighten at the same time.

Standard-Wall Steel Threaded
Pipe Nipple and Pipe Assortments

Assortments contain threaded pipe in various lengths.

Low-Pressure Steel Threaded Pipe Flanges

These flanges are for low-pressure applications in noncorrosive environments.

Low-Pressure Iron Threaded Pipe Fittings
with Right-Hand and Left-Hand Threads

The threads on these fittings have clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end.

FM-Approved Low-Pressure
Cast Iron Threaded Pipe Fittings

FM-Approved Low-Pressure Cast
Iron Threaded Pipe Flanges

Low-Pressure Cast Iron Threaded Pipe Fittings

Low-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

Low-Pressure Galvanized Steel
Threaded Pipe Fittings with Sealant

The male threads on these fittings have a sealant applied for extra leak protection.

Standard-Wall Galvanized Steel
Threaded Pipe Nipples and Pipe

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

Standard-Wall Galvanized Steel Pipe Nipples
and Pipe for Joining Dissimilar Metals

A plastic sleeve prevents destructive corrosion when connecting different metals.

Standard-Wall Galvanized Steel Threaded
Pipe Nipple and Pipe Assortments

Assortments contain threaded pipe in various lengths.

Low-Pressure Galvanized Steel Threaded Pipe Flanges

The galvanized finish on these Pressure Class 150 flanges provides fair corrosion resistance.

Extreme-Pressure Steel Threaded Pipe and Pipe Fittings

Compact Extreme-Pressure
Steel Threaded Pipe Fittings

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

Compact Precision Extreme-Pressure
Steel Threaded Pipe Fittings

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

Extreme-Pressure Steel Threaded Pipe Fittings

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Super-Thick-Wall Steel Threaded Pipe Nipples and Pipe

Typically used with extreme-pressure iron and steel threaded pipe fittings. Also known as Schedule XXH.

High-Pressure Iron and Steel Threaded Pipe and Pipe Fittings

High-Pressure Iron and Steel Threaded Pipe Fittings

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

High-Pressure Steel Threaded SAE Pipe Flanges

Also known as Code 61 SAE hydraulic flanges.

Extra-Thick-Wall Steel Threaded Pipe Nipples and Pipe

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

High-Pressure Steel Threaded
SAE Two-Piece Pipe Flanges

Combine an adapter with a two-piece pipe flange (sold separately) to build a customized flange connection for noncorrosive environments.

High-Pressure Steel Threaded Pipe Flanges

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

High-Pressure Galvanized Steel Threaded Pipe Fittings

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Extra-Thick-Wall Galvanized Steel
Threaded Pipe Nipples and Pipe

Typically used with high-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 160.

Medium-Pressure Iron and Steel Threaded Pipe and Pipe Fittings

Medium-Pressure Pipe Fittings
for Joining Dissimilar Metals

Use these unions to connect different metals in a piping or plumbing system. They have a gasket with a plastic sleeve that inhibits destructive corrosion.

Thick-Wall Galvanized Iron and Steel
Threaded Pipe Nipples and Pipe

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

Medium-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Medium-Pressure Galvanized
Steel Threaded Pipe Flanges

Also known as Pressure Class 300 flanges, these medium-pressure flanges have a galvanized finish for fair corrosion resistance.

Medium-Pressure Iron and Steel Threaded Pipe Fittings

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Thick-Wall Steel Threaded Pipe Nipples and Pipe

Typically used with medium-pressure iron and steel threaded pipe fittings. Also known as Schedule 80.

Medium-Pressure Steel Threaded Pipe Flanges

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Iron and Steel Unthreaded Pipe and Pipe Fittings

Low-Pressure Steel Unthreaded Pipe Flanges

Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

Standard-Wall Butt-Weld Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Standard-Wall Steel Unthreaded Pipe Nipples and Pipe

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

Low-Pressure Press-Connect
Steel Unthreaded Pipe Fittings

Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat.

Low-Pressure Steel Bleed Rings

Access the inside of lines operating up to 285 psi, so you can vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.

High-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Thick-Wall Butt-Weld Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

High-Pressure Steel Unthreaded SAE Pipe Flanges

Also known as Code 61 SAE hydraulic flanges.

High-Pressure Steel Unthreaded Pipe Flanges

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Thick-Wall Steel Unthreaded Pipe

Typically used with thick-wall and high-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 80.

High-Pressure Steel Bleed Rings

Tap into your line in systems operating up to 1,400 psi to vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.

Extreme-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Also known as Pressure Class 6000 fittings, these heavy duty forged fittings are the strongest steel fittings we offer.

Extreme-Pressure Steel Unthreaded Pipe Flanges

For excellent strength in extreme-pressure applications, choose these heavy duty Pressure Class 1500 flanges.

Extra-Thick-Wall Steel Unthreaded Pipe

Typically used with extreme-pressure iron and steel unthreaded pipe fittings. Pipe is also known as Schedule XXH .

Iron and Steel Clamp-On Pipe and Pipe Fittings

Grooved-End Iron Pipe Fittings

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Standard-Wall Grooved-End
Steel Pipe Nipples and Pipe

This steel pipe has grooved ends that connect to fittings with a clamp (sold separately) for an easy way to install piping systems.

Drain, Waste, and Vent Iron Pipe Fittings

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Drain, Waste, and Vent Iron Pipe

Use this pipe in gravity-flow applications both above and below ground.

Iron and Steel Pipe Fittings with Flanged Ends

Bolt the flanged end of these fittings to another same-size flange, pump, or valve with a gasket to create an access point in a pipe line.

Aluminum Pipe and Pipe Fittings

Low-Pressure Aluminum Threaded Pipe Fittings

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Standard-Wall Aluminum
Threaded Pipe Nipples and Pipe

Typically used with low-pressure aluminum threaded pipe fittings.

Low-Pressure Aluminum Threaded Pipe Flanges

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Miniature Medium-Pressure
Aluminum Threaded Pipe Fittings

Their small size makes these miniature fittings a good choice for cramped, confined spaces.

Medium-Pressure Aluminum Threaded Pipe Fittings

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

High-Pressure Aluminum Threaded Pipe Fittings

Also known as Pressure Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Thick-Wall Aluminum Threaded Pipe Nipples and Pipe

Typically used with high-pressure aluminum threaded pipe fittings.

Standard-Wall Butt-Weld Aluminum
Unthreaded Pipe Fittings

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Standard-Wall Aluminum
Unthreaded Pipe Nipples and Pipe

Typically used with standard-wall aluminum unthreaded pipe fittings.

Aluminum Unthreaded Pipe Flanges

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Thin-Wall Socket-Connect
Aluminum Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Thin-Wall Butt-Weld Aluminum Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Thin-Wall Aluminum Unthreaded Pipe

Typically used with thin-wall aluminum unthreaded pipe fittings.

Thick-Wall Aluminum Unthreaded Pipe

Typically used with thick-wall aluminum unthreaded pipe fittings.

Thick-Wall Butt-Weld Aluminum
Unthreaded Pipe Fittings

Thick walls give these Schedule 80 fittings excellent strength.

Copper-Nickel Pipe and Pipe Fittings

Copper-Nickel Threaded Pipe Fittings

These fittings have excellent resistance to stress cracking and have better corrosion resistance than most stainless steel alloys.

Standard-Wall Copper-Nickel
Threaded Pipe Nipples and Pipe

Also called close nipples, these Schedule 40 nipples are threaded on both ends to the center.

Copper-Nickel Butt-Weld Pipe Fittings

Also known as Pressure Class 200 fittings.

Copper-Nickel Unthreaded Pipe

Also known as Pressure Class 200 pipe.

Titanium Threaded Pipe Fittings

Titanium has similar strength to steel, but is approximately 40% lighter. It has better corrosion resistance than most stainless steel alloys and can handle corrosive substances, such as salt water and acids.

Plastic Pipe and Pipe Fittings for Water

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Standard-Wall Plastic Pipe for Water

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Thick-Wall Plastic Pipe for Water

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Thick-Wall Plastic Pipe Flanges for Water

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

High-Pressure Barbed Plastic Pipe Fittings for Water

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Low-Pressure Barbed Plastic Pipe Fittings for Water

Use for pressures up to 60 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Semi-Flexible Plastic Pipe for Water

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

CPVC Pipe Fittings for Hot Water

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

CPVC Pipe for Hot Water

Connect to CPVC pipe fittings for use in high-temperature plumbing and water supply applications up to 170° or 200° F.

CPVC Pipe Flanges for Hot Water

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

UV-Resistant Standard-Wall PVC Pipe Fittings for Water

Connect these fittings to UV-resistant PVC pipe. Designed for outdoor use, they contain an additive that protects against the damaging effects of ultraviolet light. Fittings are typically used in low-pressure residential and commercial plumbing and water supply applications up to 300 psi.

UV-Resistant Thick-Wall PVC Pipe for Water

With thicker, stronger walls than standard-wall pipe, this Schedule 80 pipe can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Use for pressures up to 550 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.

UV-Resistant Standard-Wall PVC Pipe for Water

This Schedule 40 pipe is typically used in low-pressure residential and commercial plumbing and water supply applications. It can handle pressures up to 300 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.

Plastic Pipe and Pipe Fittings for Chemicals

UV-Resistant Polypropylene Pipe Fittings for Chemicals

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

UV-Resistant Polypropylene Pipe Flanges for Chemicals

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

UV-Resistant Polypropylene Pipe for Chemicals

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

Easy-Access UV-Resistant Polypropylene
Pipe Fittings for Chemicals

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Clamps for Easy-Access UV-Resistant
Polypropylene Pipe Fittings for Chemicals

Use these clamps to connect easy-access UV-resistant polypropylene pipe fittings to pipe. The clamp-together design allows you to access your line for routine maintenance.

High-Temperature PTFE Pipe Fittings for Chemicals

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

High-Temperature PTFE Pipe
Nipples and Pipe for Chemicals

This PTFE pipe can withstand a wider temperature range than any of our other plastic pipe for chemicals. It is commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

High-Temperature PTFE Pipe Flanges for Chemicals

Bolt two same-size flanges together with a gasket to create an access point within a line. Made of PTFE, they can handle a wider temperature range than any of our other plastic pipe flanges for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Crack-Resistant PFA Pipe Fittings for Chemicals

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Clamps for Easy-Access CPVC
Pipe Fittings for Chemicals

Use these clamps to connect easy-access CPVC pipe fittings and pipe.

Easy-Access CPVC Pipe Flanges for Chemicals

The grooved ends on these flanges connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Flanges have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances. They are also known as Victaulic flanges.

Easy-Access CPVC Pipe for Chemicals

Also known as Victaulic pipe, this pipe has grooved ends that connect to fittings and flanges with a clamp, so you can access your line for routine maintenance. It is CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Easy-Access CPVC Pipe Fittings for Chemicals

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Flame-Retardant PVDF Pipe Fittings for Chemicals

These PVDF fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. PVDF is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

Flame-Retardant PVDF Pipe Flanges for Chemicals

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges meet UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. They are PVDF, which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Pressure Class 150 flanges.

Flame-Retardant PVDF Pipe
Nipples and Pipe for Chemicals

Pipe meets UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. It is made of PVDF, which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

Fiberglass Pipe Flanges for Corrosive Chemicals

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

Fiberglass Pipe for Corrosive Chemicals

With excellent corrosion resistance, this pipe can handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. Layers of fiberglass give this pipe better strength and durability than any of our other pipe for chemicals.

Fiberglass Pipe Fittings for Corrosive Chemicals

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

Gravity-Flow Plastic Pipe and Pipe Fittings for Chemical Waste

Drain, Waste, and Vent ABS Pipe Fittings for Chemicals

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Drain, Waste, and Vent ABS
Pipe Flanges for Chemicals

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Drain, Waste, and Vent ABS Pipe for Chemicals

This pipe is an economical choice for gravity-flow chemical waste systems. Pipe is ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Gravity-Flow CPVC Pipe Fittings
for Corrosive Chemical Waste

These fittings are NSF certified for use in corrosive waste gravity-flow systems. Made of CPVC, they have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances.

Gravity-Flow CPVC Pipe for Corrosive Chemical Waste

Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.

Plastic Pipe Fittings for Oil and Gasoline

Plastic Pipe Fittings for Oil

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Plastic Pipe Fittings for Gasoline

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Plastic Pipe and Pipe Fittings for Drain, Waste, and Vent

Aboveground Standard-Wall PVC Pipe
Fittings for Drain, Waste, and Vent

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Aboveground Standard-Wall PVC Pipe
Flanges for Drain, Waste, and Vent

Bolt two same-size flanges together with a gasket to create an access point within a line. Also known as Schedule 40 flanges, they are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Cast Iron-to-PVC Pipe Adapters
for Drain, Waste, and Vent

These adapters connect PVC waste pipe to cast iron pipe without adding bulk. Instead of securing pipes together from the outside like clamp-on couplings, these flexible adapters fit into cast iron pipe to create a tight compression seal.

Underground PVC Pipe Fittings
for Drain, Waste, and Vent

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Underground PVC Pipe for Drain, Waste, and Vent

This pipe has thinner walls than Schedule 40 pipe, so it’s lighter in weight and has more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines.

Underground Snap-Lock Polyethylene
Pipe Fittings for Drain, Waste, and Vent

The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.

Underground Snap-Lock Polyethylene
Pipe for Drain, Waste, and Vent

Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.

Plastic Pipe Fitting Plugs for Food and Beverage

Plugs are are suitable for food and beverage applications and won't impart tastes or odors to your product.

Clamp-On Connectors

Low-Pressure Clamp-On Connectors
for Drain, Waste, and Vent

Cut-to-Length Low-Pressure Clamp-On
Connectors for Drain, Waste, and Vent

Connect two pipes that are up to 100 feet apart—cut the connector to the length you need and attach a clamp to each end.

Low-Pressure Clamp-On Connectors for Water

Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly.

Low-Pressure Clamp-On Connectors for Air

These connectors are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems.

Low-Pressure Quick-Lock Clamp-On Connectors for Air

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

Medium-Pressure Clamp-On Connectors

Use in medium-pressure applications up to 230 psi.

High-Pressure Clamp-On Connectors

Use in high-pressure applications up to 500 psi.

Manifolds

Right-Angle Flow Rectangular Manifolds

Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers.

Dual-Section Right-Angle Flow Rectangular Manifolds

These manifolds have two separate sections inside, so you can run two different substances through them without worrying about them intermixing. Also known as headers.

Cleaned-and-Bagged Right-Angle
Flow Rectangular Manifolds

Designed for ultra-clean environments, these manifolds are cleaned, dried, and vacuum sealed in plastic to prevent dirt and moisture from contaminating the inside. Use them to distribute air or fluid to multiple locations from a single supply source. Also known as headers.

Straight-Flow Rectangular Manifolds

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

Round Manifolds for Hose Lines

Mount these manifolds on the end of a hose line to distribute air, water, or hydraulic fluid to three locations from a single supply source.

Low-Profile Square Manifolds

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

Low-Profile Hex Manifolds

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

Miniature Hex Manifolds

A great solution when space is at a premium, these manifolds are less than an inch in height, yet allow you to supply up to 12 lines from one distribution point.

Color-Coded Irregular Hex Manifolds

Use these manifolds with molding equipment to circulate hot and cold water through your line. They have a red side for hot water and a blue side for cold water.

Junction Blocks

Straight-Flow Junction Blocks

Use these junction blocks to organize and separate multiple lines in your system. They have threaded holes that allow air or fluid to flow straight through the block.

Right-Angle Flow Junction Blocks

These junction blocks have threaded holes that allow air or fluid to flow at a 90° angle through the block. Use them to organize and separate multiple lines in your system.

Tube Fittings for Stainless Steel Tubing

37° Flared Fittings for Stainless Steel Tubing

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

37° Flared Fittings with Thread
Sealant for Stainless Steel Tubing

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

Cleaned and Bagged 37° Flared
Fittings for Stainless Steel Tubing

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

Precision AN 37° Flared Fittings
for Stainless Steel Tubing

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Vibration-Resistant Precision AN 37°
Flared Fittings for Stainless Steel Tubing

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

High-Polish Metal Quick-Clamp Sanitary Tube Fittings

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Clamps for High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line.

Extra-Support High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Also known as I-line fittings, these quick-clamp fittings permit easy access to your line.

Clamps for Extra-Support High-Polish
Metal Quick-Clamp Sanitary Tube Fittings

Connect extra-support quick-clamp fittings for a fast and easy way to access your line.

Extra-High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

Clamps for Plastic Quick-Clamp Sanitary
Fittings for Stainless Steel Tubing

Plastic Quick-Clamp Sanitary
Fittings for Stainless Steel Tubing

Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Clamps for Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Connect quick-clamp fittings in high-vacuum applications.

Rings for Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Use these rings with quick-clamp high-vacuum fittings.

Yor-Lok Fittings for Stainless Steel Tubing

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Cleaned and Bagged Yor-Lok
Fittings for Stainless Steel Tubing

For applications that require an extra level of cleanliness, these fittings are individually bagged to prevent contamination.

Extreme-Pressure Yor-Lok
Fittings for Stainless Steel Tubing

These fittings have the highest pressure rating of all the Yor-Lok tube fittings we offer.

Butt-Weld Fittings for Stainless Steel Tubing

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

High-Pressure Socket-Connect
Fittings for Stainless Steel Tubing

Use at pressures up to 4,300 psi.

Compression Fittings for Stainless Steel Tubing

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Precision Compression Fittings
for Stainless Steel Tubing

High-Pressure Compression
Fittings for Stainless Steel Tubing

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

Vibration-Resistant Compression
Fittings for Stainless Steel Tubing

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

High-Polish Gasket Fittings for Stainless Steel Tubing

Fittings are polished to a32 Ra and under finish on the interior.

Ultra-High-Polish Gasket Fittings
for Stainless Steel Tubing

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

Ultra-High-Polish Gasket Adapters
for Stainless Steel Tubing

Vibration-Resistant Ultra-High-Polish
Gasket Fittings for Stainless Steel Tubing

Fittings have two anti-torque rings that compress the gasket to prevent rotation and reduce particle generation in high-vibration applications.

O-Ring Face Seal Fittings for Stainless Steel Tubing

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

O-Ring Face Seal Tube Adapters
for Stainless Steel Tubing

Bolt-Together High-Vacuum
Fittings for Stainless Steel Tubing

For high-vacuum systems with tube sizes too large for quick-clamp (KF) fittings, choose these bolt-together fittings.

Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

An alternative to bolt-together fittings, these handle larger tube OD sizes and have higher vacuum ratings than quick-clamp fittings. Also known as ISO-K high-vacuum fittings, the clamps have claws that grab hold of fittings with flanged ends.

Clamps for Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Connect claw-clamp high-vacuum fittings for an airtight seal.

Quick-Connect High-Vacuum
Fittings for Stainless Steel Tubing

Twist these fittings onto high-vacuum tubing to quickly make sealed, high-vacuum connections without the need for clamping, welding, or tools.

Push-to-Connect Fittings for Stainless Steel Tubing

Push-to-Connect Fittings for
Stainless Steel-to-Plastic Tubing

Connect stainless steel tubing on one end and plastic tubing on the other end.

Ultra-High-Vacuum Flanges and
Fittings for Stainless Steel Tubing

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Quick-Turn Couplings for Stainless Steel Tubing

Also known as luer lock couplings, these consist of a plug and socket that connect with a half turn. Use in low-pressure applications up to 30 psi.

Rings for Claw-Clamp and Bolt-Together
High-Vacuum Fittings for Stainless Steel Tubing

Create airtight seals in high-vacuum systems by placing these rings between two claw-clamp (ISO-K) or bolt-together (ISO-F) fittings.

Tube Fittings for Copper and Brass Tubing

Solder-Connect Fittings for Copper Tubing

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

Cleaned and Bagged Solder-Connect
Fittings for Copper Tubing

When cleanliness is crucial to your application, choose these fittings that are individually cleaned and bagged to prevent contamination.

45° Flared Fittings for Copper and Brass Tubing

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

Supported 45° Flared Fittings
for Copper and Brass Tubing

The flared end of the fitting nests inside the fitting body, providing extra support to the tubing. Fittings are also known as inverted 45° flared fittings.

37° Flared Fittings for Copper Tubing

Also known as JIC (Joint Industrial Council) fittings, these connect to tubing that is flared to 37°. They can handle higher pressures than 45° flared fittings.

Compression Fittings for Copper Tubing

Nickel-Plated Brass Compression
Fittings for Copper Tubing

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings.

Precision Compression Fittings for Copper Tubing

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

Vibration-Resistant Compression
Fittings for Copper Tubing

The sleeve in these fittings is rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal.

Quick-Assembly Compression
Fittings for Copper Tubing

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

Press-Connect Fittings for Copper Tubing

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Crimping Tools for Press-Connect
Fittings for Copper Tubing

Create a leak-tight seal without using heat or solder. Slide copper tubing into a press-connect fitting and use these tools to crimp the connection.

Yor-Lok Fittings for Copper Tubing

Brass Push-to-Connect Fittings for Copper Tubing

Choose these metal fittings when you need better durability than our plastic push-to-connect fittings.

Plastic Push-to-Connect Fittings for Copper Tubing

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

Drill-and-Install Push-to-Connect
Fittings for Copper and Brass Tubing

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Tube Fittings for Steel Tubing

37° Flared Fittings for Steel Tubing

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Tight-Space 37° Flared Fittings for Steel Tubing

The external hex bolt on these fittings allows for easy installation in cramped spaces.

30° Flared Fittings for Steel Tubing

Also known as JIS (Japanese Industrial Standard) fittings.

Compression Fittings for Steel Tubing

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Vibration-Resistant Compression
Fittings for Steel Tubing

High-Pressure Compression Fittings for Steel Tubing

Thicker walls make these fittings—sometimes called flareless or bite fittings—withstand about twice as much pressure as standard compression fittings, so they’re good for hydraulic power applications.

Vacuum Fittings for Steel Tubing

Use these fittings in an air vacuum system to avoid the hassle of brazing and welding. Insert two fittings into a clamp and tighten to form a secure seal in steel tubing.

Clamps for Vacuum Fittings for Steel Tubing

Yor-Lok Fittings for Steel Tubing

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

O-Ring Face Seal Fittings for Steel Tubing

A tube adapter sits flush against the flat face of the fitting so you can slide the steel tubing and fitting sideways to disconnect in cramped spaces. Also known as zero-clearance fittings.

O-Ring Face Seal Tube Adapters for Steel Tubing

Tube Fittings for Aluminum Tubing

37° Flared Fittings for Aluminum Tubing

Also known as JIC (Joint Industrial Council) fittings, these provide a tight seal on tubing that is flared to 37°.

Tight-Space 37° Flared Fittings for Aluminum Tubing

The external hex bolt on these fittings allows for easy installation in cramped spaces. They are also known as banjo-style fittings and JIC (Joint Industrial Council) fittings. They provide a tight seal on tubing that is flared to 37°.

Tube Fittings for Nickel Alloy Tubing

Acid-Resistant Yor-Lok Fittings for Nickel Alloy Tubing

These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.

Ultra-Corrosion-Resistant Yor-Lok
Fittings for Nickel Alloy Tubing

With the best corrosion resistance of any metal fitting we offer, these Hastelloy fittings will stand up to aggressive chemicals and are resistant to pitting and stress cracking. Also known as instrumentation fittings, they include a nut with two sleeves.

Push-to-Connect Fittings for Plastic and Rubber Tubing—Air and Water

Push-to-Connect Tube Fittings for Air

Push-to-Connect Tube Fittings with Shut-Off for Air

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Universal-Thread Nickel-Plated Brass
Push-to-Connect Tube Fittings for Air and Water

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Universal-Thread Push-to-Connect
Tube Fittings for Air and Water

Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads.

Universal-Thread Stainless Steel
Push-to-Connect Tube Fittings for Air and Water

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

Nickel-Plated Brass Push-to-Connect
Tube Fittings for Air

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

Stainless Steel Push-to-Connect
Tube Fittings for Air and Water

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

Brass Push-to-Connect Tube Fittings for Air

Made of brass, these fittings have good corrosion resistance.

Moisture-Resistant Push-to-Connect
Tube Fittings for Air and Water

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Universal-Thread Moisture-Resistant
Push-to-Connect Tube Fittings for Air and Water

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Low-Temperature/High-Pressure D.O.T.
Push-to-Connect Tube Fittings for Air

Use at pressures up to 250 psi.

Low-Temperature D.O.T.
Push-to-Connect Tube Fittings for Air

Use at pressures up to 150 psi.

Rotating Push-to-Connect Tube Fittings for Air

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

High-Temperature Push-to-Connect
Tube Fittings for Air and Water

Withstanding temperatures up to 300° F, these fittings have the highest temperature rating of all our push-to-connect tube fittings for air and water.

High-Pressure Push-to-Connect
Tube Fittings for Air and Water

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Weld-Spatter-Resistant Push-to-Connect
Tube Fittings for Air and Water

Designed for use in welding applications, these fittings are flame retardant.

Drill-and-Install Push-to-Connect
Tube Fittings for Air and Water

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Barbed Fittings for Plastic and Rubber Tubing—Air and Water

Stainless Steel High-Pressure Barbed
Tube Fittings for Air and Water

Made of stainless steel, these fittings have better corrosion resistance than brass fittings.

Brass High-Pressure Barbed
Tube Fittings for Air and Water

Fittings have good corrosion resistance.

Brass Low-Pressure Barbed
Tube Fittings for Air and Water

Fittings have good corrosion resistance.

Nickel-Plated Brass Low-Pressure
Barbed Tube Fittings for Air and Water

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Aluminum Low-Pressure Barbed
Tube Fittings for Air and Water

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Choose-a-Color Aluminum Low-Pressure
Barbed Tube Fittings for Air and Water

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Plastic Barbed Tube Fittings for Air and Water

Barbs grip onto tubing.

Tight-Seal Plastic Barbed
Tube Fittings for Air and Water

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Tight-Seal Moisture-Resistant Plastic
Barbed Tube Fittings for Air and Water

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Easy-View Plastic Barbed
Tube Fittings for Air and Water

Monitor flow with these clear fittings.

Odor-Resistant Plastic Barbed Tube Fittings for Water

Silver ions in the material help inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.

Screw-On Nut Barbed Tube Fittings for Air

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to holds the tubing in place.

Compression Fittings for Plastic and Rubber Tubing—Air and Water

Brass Compression Tube Fittings for Air and Water

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

O-Rings for Brass Compression
Tube Fittings for Air and Water

Use these O-rings with brass compression tube fittings that have BSPP male threads. They create a seal on the BSPP male threads to guard against leaks.

Tight-Seal Brass Compression
Tube Fittings for Air and Water

A built-in tube support slips inside the tubing to prevent collapsing and provides a sturdy connection for an extra-tight seal.

D.O.T. Brass Compression Tube Fittings for Air

These compression tube fittings meet Department of Transportation FMVSS 571 safety standards for air brake lines.

Quick-Assembly Brass Compression
Tube Fittings for Air and Water

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Plastic Compression Tube Fittings for Water

Made of acetal, these compression fittings are lighter in weight than metal compression fittings and won’t absorb moisture when used in wet environments.

Plastic Compression Tube Fittings for Air

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

Quick-Disconnect Couplings for Plastic and Rubber Tubing—Air and Water

Plastic Quick-Disconnect Tube
Couplings for Air and Water

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

Brass Quick-Disconnect Tube Couplings for Air

Made of brass, these couplings are more durable than plastic couplings.

Low-Profile High-Pressure
Quick-Disconnect Tube Couplings for Air

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

High-Pressure Quick-Disconnect Tube Couplings for Air

Couplings can handle pressures up to 250 psi.

Quick-Turn Couplings for Plastic and Rubber Tubing—Air and Water

Plastic Quick-Turn Tube Couplings for Air and Water

Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.

Stainless Steel Quick-Turn Tube Couplings for Air

Made of stainless steel, these couplings stand up to wet environments.

Brass Quick-Turn Tube Couplings for Air

These brass couplings have good corrosion resistance.

Plastic Quick-Turn Tube Couplings
with Shut-Off for Air and Water

A built-in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.

Tube Fittings for Plastic and Rubber Tubing—Food, Beverage, and Dairy

Stainless Steel Barbed Tube
Fittings for Food and Beverage

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

Super-Flow Plastic Barbed Tube
Fittings for Food and Beverage

A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow.

High-Temperature Plastic Barbed
Tube Fittings for Food and Beverage

Fittings withstand temperatures up to 220° F.

Plastic Barbed Tube Fittings for Food and Beverage

Made of FDA listed materials, these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Push-to-Connect Fittings for Plastic
Tubing—Food and Beverage

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Brass Push-to-Connect Fittings for Plastic
Tubing—Food, Beverage, and Dairy

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

High-Temperature Compression
Tube Fittings for Food and Beverage

Made of PVDF (also known as Kynar), these fittings have excellent strength and can handle temperatures as high as 240° F or 270° F.

Compression Tube Fittings for Food and Beverage

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Quick-Disconnect Tube
Couplings for Food and Beverage

These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.

Quick-Disconnect Tube Couplings for Dairy

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Quick-Clamp Fittings for Dairy

Clamps for Quick-Clamp Fittings for Dairy

Use these clamps with quick-clamp fittings for dairy to quickly connect and disconnect your line as needed.

Tube Fittings for Plastic Tubing—Drinking Water

Push-to-Connect Tube Fittings for Drinking Water

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Push-to-Connect Tube Fittings for Hot Drinking Water

Fittings can withstand temperatures up to 200° F.

Barbed Tube Fittings for Drinking Water

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Crimping Tools for Barbed
Tube Fittings for Drinking Water

Use these tools with a crimping ring (sold separately) to connect barbed tube fittings for drinking water to tubing.

Socket-Connect Fittings for
Plastic Tubing—Drinking Water

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.

Tube Fittings for Plastic and Rubber Tubing—Chemicals

Barbed Fittings for Plastic and
Rubber Tubing—Chemicals

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Plastic Push-to-Connect Tube Fittings for Chemicals

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push, and an internal gripping ring and fluoroelastomer O-ring hold the tubing tight.

Stainless Steel Push-to-Connect
Tube Fittings for Chemicals

Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Quick-Disconnect Couplings for Plastic
and Rubber Tubing—Chemicals

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 120 psi.

Compression Fittings for Plastic Tubing—Chemicals

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

Tube Fittings for Plastic and Rubber Tubing—High-Purity

Barbed Fittings for Plastic and
Rubber Tubing—High-Purity

Fittings have a barb that grips onto tubing. Use in applications up to 150 psi.

Push-to-Connect Fittings for Plastic Tubing—High-Purity

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Tube Fittings for Plastic and Rubber Tubing—Gasoline

Barbed Fittings for Plastic and
Rubber Tubing—Gasoline

Fittings have a barb that grips onto tubing. Use in applications up to 150 psi.

Quick-Disconnect Couplings
for Plastic Tubing—Gasoline

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 150 psi.

Sanitary Sampling Stainless Steel Tube Fittings

Take samples in sanitary environments—these tube fittings won’t contaminate your lines or force you to pause them.

Hose Fittings for Air and Water

Metal Barbed Hose Fittings for Air and Water

Metal hose fittings have better durability than plastic barbed hose fittings.

Plastic Barbed Hose Fittings for Water

Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Metal Push-On Barbed Hose Fittings for Air and Water

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Plastic Push-On Barbed Hose Fittings for Water

Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Easy-Fit Barbed Hose Fittings for Air and Water

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Tight-Seal Barbed Hose Fittings for Air and Water

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Threaded Swivel Hose Fittings for Air

Connect these fittings to air tools for pneumatic applications.

Threaded Swivel Hose Fittings for Water

Use these fittings with power washer guns and in other high-pressure water supply applications.

Screw-On Hose Fittings for Air and Water

The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.

Quick-Disconnect Hose Couplings for Air and Water

Industrial Quick-Disconnect Hose Couplings for Air

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Industrial Quick-Disconnect Hose
Coupling Size-Identification Kits

Kits contain Industrial quick-disconnect plugs in four coupling sizes so you can determine the size of your couplings without needing to measure.

Universal Quick-Disconnect Hose Sockets for Air

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Schrader Quick-Disconnect Hose Couplings for Air

Compatible with Schrader-shape plugs and sockets.

Open-Flow Quick-Disconnect
Hose Couplings for Air and Water

Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.

ARO Quick-Disconnect Hose Couplings for Air

Compatible with ARO-shape plugs and sockets.

Tru-Flate Quick-Disconnect Hose Couplings for Air

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Color/Shape-Match Quick-Disconnect
Hose Couplings for Air and Water

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Ring-Lock Quick-Disconnect Hose Couplings for Air

Compatible with Ring-Lock-shape plugs and sockets.

Lincoln Quick-Disconnect Hose Couplings for Air

Compatible with Lincoln-shape plugs and sockets.

Plastic Quick-Disconnect Hose
Couplings for Air and Water

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

European Quick-Disconnect Hose Couplings for Air

With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.

Japanese Quick-Disconnect Hose Couplings for Air

Compatible with Japanese-shape plugs and sockets.

Compact Quick-Disconnect Hose Couplings for Air

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Cam-and-Groove Hose Couplings for Water

Metal Cam-and-Groove Hose Couplings for Water

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Plastic Cam-and-Groove Hose Couplings for Water

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Metal Cam-and-Groove Hose
Couplings with Shut-Off Valve for Water

Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and socket for minimal fluid loss when disconnecting the hose line.

Claw Hose Couplings for Air and Water

Twist-Claw Hose Couplings for Air and Water

Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.

Spring-Lock Twist-Claw Hose
Couplings for Air and Water

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

Large Twist-Claw Hose Couplings for Air and Water

Also known as universal couplings, these have identical claw-style heads and connect by being pushed together with a quarter twist.

Extra-Large Twist-Claw Hose
Couplings for Air and Water

Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.

Grip-Lock Hose Couplings for Air

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Double Grip-Lock Hose Couplings for Air and Water

Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.

Hydraulic Hose Fittings

Threaded Hose Fittings for Hydraulic Fluid

Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 6,000 psi

Continuous-Swivel Threaded
Hose Fittings for Hydraulic Fluid

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 5,000 psi.

Push-On Barbed Hose Fittings for Hydraulic Fluid

Fittings have sharp barbs that grip push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use in low-pressure hydraulic applications up to 350 psi.

Screw-On Hose Fittings for Hydraulic Fluid

These two-piece fittings screw directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose. Use in high-pressure hydraulic applications up to 5,800 psi.

International Standard ISO B Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

High-Pressure Minimal-Spill Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these couplings at pressures up to 7,200 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with International Standard ISO Minimal-Spill-shape plugs and sockets.

Snap-Tite H-Shape Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

High-Pressure Thread-Lock Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these couplings at pressures up to 10,000 psi. The plug and socket thread together to form a stronger connection than other quick-disconnect couplings. They are compatible with High-Pressure Thread-Lock-shape plugs and sockets.

International Standard ISO A Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Pioneer Quick-Disconnect Hose
Couplings for Hydraulic Fluid

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Garden Hose Fittings

Metal Garden Hose Fittings

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Metal Garden Hose Fittings for Drinking Water

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Plastic Garden Hose Fittings

Made of nylon, these fittings are lighter in weight than metal garden hose fittings. Attach them to garden hose for a variety of water supply applications.

Quick-Disconnect Garden Hose Couplings

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, push the plug into the socket. The compact design makes these couplings sleeker and easier to handle than cam-and-groove garden hose couplings.

Threaded Garden Hose Couplings

These two-piece couplings thread together to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings.

Cam-and-Groove Garden Hose Couplings

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

Flexible Kink Absorbers for Garden Hose

Use these kink absorbers to ensure maximum water flow and extend the life of your garden hose. They connect between the hose and faucet to eliminate sharp hose bends that can cause kinking and hose damage.

Fire-Fighting Hose Fittings

Connect these fittings to fire hydrants and washdown equipment.

Rocker-Lug Fire-Fighting Hose Fittings

The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Pin-Lug Fire-Fighting Hose Fittings

The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Chemical and Petroleum Hose Fittings

Metal Barbed Hose Fittings
for Chemicals and Petroleum

These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Plastic Barbed Hose Fittings
for Chemicals and Petroleum

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Easy-Fit Barbed Hose Fittings for Chemicals

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Metal Cam-and-Groove Hose
Couplings for Chemicals and Petroleum

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Plastic Cam-and-Groove Hose
Couplings for Chemicals and Petroleum

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Metal Cam-and-Groove Hose Couplings with
Shut-Off Valve for Chemicals and Petroleum

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

Plastic Cam-and-Groove Hose Couplings
with Shut-Off Valve for Chemicals

Made of polypropylene, these couplings are lighter in weight than metal cam-and-groove couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Chemicals

To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.

Compressed Gas Hose Fittings

Threaded Hose Fittings for Compressed Gas

Use these CGA fittings to connect welding hose to pressure regulators and torches.

Threaded Hose-to-Propane-Torch
Adapters for Compressed Gas

These CGA adapters allow you to connect a hose to a propane torch.

Threaded Hose-to-Propane-Tank
Adapters for Compressed Gas

These CGA adapters have a male threaded end that connects to a propane tank and a male threaded end that connects to welding hose.

Hose Crimping Tool and Fitting
Sets for Compressed Gas

Sets contain a crimping tool and a variety of CGA fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system.

Barbed Hose Fittings for Compressed Gas

Commonly used in low-pressure welding applications, these fittings connect downstream of your pressure regulator. Slide the barbed end into hose and secure with a crimp-on hose ferrule.

Quick-Disconnect Hose Couplings for Compressed Gas

These couplings consist of a plug and socket that connect and disconnect quickly. Use them if you need to frequently link and unlink welding hoses, torches, and regulators. They are also known as CGA couplings.

High-Pressure Threaded Fittings for Compressed Gas

Designed to handle high-pressure welding applications, these CGA fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders.

High-Pressure Nipples for Compressed Gas

Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut to make a threaded connection.

Coolant Hose Fittings

Beaded Hose Fittings for Coolant

A single rounded bead grips onto hose just like a barb, but has no sharp edges that could cut or damage soft hose. Slide the beaded end into hose and secure with a clamp. Use in coolant applications up to 300 psi.

Barbed Hose Fittings for Coolant

Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.

Quick-Disconnect Hose Couplings for Coolant

Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.

Steam Hose Fittings

Quick-Disconnect Hose Couplings for Steam

Couplings consist of a plug and a socket that connect quickly. Use them if you need frequent access to a line. They are designed for low-pressure steam applications up to 300 psi.

Barbed Hose Fittings for Steam

Use these barbed fittings in low-pressure steam applications up to 150 psi. Slide the barbed end into hose and secure with a clamp.

Interlocking Clamps for Hose Fittings for Steam

Use with interlocking-clamp hose fittings to replace a damaged clamp. They consist of two halves held together by nuts and bolts.

Interlocking-Clamp Hose Fittings for Steam

Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.

Drinking Water Hose Fittings

Fittings meet NSF/ANSI Standard 61 for drinking (potable) water.

Abrasive-Material Hose Fittings

Use these fittings with sand, steel shot, and other abrasive material. They have a unique claw-style head that connects to other abrasive-material hose fittings with a quarter twist.

Food and Beverage Hose Fittings

Cam-and-Groove Hose Couplings
for Food and Beverage

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Quick-Disconnect Plastic-Shape Hose
Couplings for Food and Beverage

Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.

International Standard ISO B Quick-Disconnect
Hose Couplings for Food and Beverage

These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.

Barbed Hose Fittings for Food and Beverage

Fittings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Slide the barbed end into hose and secure with a clamp.

Couplers for High-Pressure Fill Valves

Natural and LP Gas Hose Fittings

Use these couplings when you need frequent access to a gas line. A complete coupling consists of a plug and a socket that connect and disconnect quickly.

Lubrication Hose Fittings

Use these two-piece fittings in grease and lubrication lines. They screw directly onto hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.

Swivels for Hose Nozzles

Threaded Swivels for Hose Nozzles

Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Barbed Swivels for Hose Nozzles

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Hose Crimpers

Hose-Crimping Pliers

As you squeeze the handles, the vise-like jaws lock tightly onto the ferrule to secure barbed fittings onto your hose.

Lever-Operated Crimpers with Dies

Crimpers are furnished with five removable dies that crimp air and water hose.

Hammer-Operated Crimpers

Use a hammer strike or a vise to crimp ferrules onto your hose and secure barbed hose fittings.

Lever-Operated Crimpers

Individual dies allow you to crimp large sizes of air and water hose from 3/4" to 1 3/8" OD.

Thread Adapters

Male-Female Round Universal
Thread Adapters with Through Hole

Connect male- and female-threaded parts of different thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Inch-to-NPT Male-Female Hex Thread Adapters

Inch-to-NPT Male-Female Hex
Thread Adapters with Through Hole

The through hole allows you to connect float rods to float valves.

Male Round Universal Thread
Adapters with Through Hole

Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Conduit and Cord Grip Thread Adapters

Adapt metric, NPT, and PG conduit and cord grip threads to match knockout threads.

Lubricating

Grease Fitting Adapters

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.

Swivels for Container-Mount Grease Dispenser Nozzles

Move grease-dispensing guns in any direction without kinking the outlet hose.

Oil Manifolds

Deliver an equal amount of oil to multiple lubrication points at once.

Hydraulic Jacks

Hose Fittings for Hydraulic Jacks

Use these fittings with hydraulic hose.

Compact Manifolds for Hydraulic Jacks

Connect up to five rams to a single pump.

Thread Adapters for Drum Openings

Convert drum openings with metric or BSPP threads to a 2 NPT pipe size.

Plumbing Fixtures and Drains

Drain Pipe Plugs

Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.

Cleanout Plugs

Close off your drain cleanout pipe with these plugs.

Sink Drain Compression Tube Adapters

These adapters connect sink drain traps to threaded wall and floor drain outlets.

Slip-Joint Fittings

Use these fittings to connect tailpieces, P-traps, S-traps, and extension tubing to sink drains.

Laboratory Flanges and Turrets

Provide a connection for hose cocks, needle valves, and nozzles by attaching these flanges and turrets to your supply pipe.

High-Temperature Chimney Vents and Fittings

Built to withstand temperatures up to 1000° F, these vent pipes and fittings are for use with boilers, furnaces, stoves, and other equipment that is fired by coal, gas, oil, propane, or wood.

Quick-Install Pressure Test Fittings

Tighten these threaded fittings with your hands for a secure connection in testing, flushing, venting, and plugging applications—no tools, tape, or sealant required.

How to Identify and Measure Fittings

Stainless Steel Threaded Pipe and Pipe Fittings

Low-Pressure Stainless Steel Threaded Pipe Fittings

Standard-Wall Stainless SteelThreaded Pipe Nipples and Pipe

Premium Low-Pressure Stainless SteelThreaded Pipe Fittings with Certification

Low-Pressure Stainless Steel Threaded Pipe Flanges

Low-Pressure Stainless SteelThreaded Pipe Fittings with Sealant

Standard-Wall Stainless Steel ThreadedPipe Nipples and Pipe with Sealant

Extreme-Pressure StainlessSteel Threaded Pipe Fittings

Precision Extreme-Pressure StainlessSteel Threaded Pipe Fittings

Medium-Pressure StainlessSteel Threaded Pipe Fittings

Miniature Medium-Pressure StainlessSteel Threaded Pipe Fittings

High-Pressure Stainless Steel Threaded Pipe Fittings

Thick-Wall Stainless SteelThreaded Pipe Nipples and Pipe

High-Pressure Stainless Steel Threaded Pipe Flanges

High-Pressure Stainless SteelThreaded SAE Pipe Flanges

High-Pressure Stainless SteelThreaded SAE Two-Piece Pipe Flanges

Stainless Steel Unthreaded Pipe and Pipe Fittings

Standard-Wall Butt-Weld StainlessSteel Unthreaded Pipe Fittings

Low-Pressure Stainless Steel Unthreaded Pipe Flanges

Standard-Wall Stainless SteelUnthreaded Pipe Nipples and Pipe

Low-Pressure Press-Connect StainlessSteel Unthreaded Pipe Fittings

Low-Pressure Socket-Connect StainlessSteel Unthreaded Pipe Fittings

Low-Pressure Stainless Steel Bleed Rings

Thin-Wall Butt-Weld StainlessSteel Unthreaded Pipe Fittings

Thin-Wall Stainless Steel Unthreaded Pipe

High-Pressure Socket-ConnectStainless Steel Unthreaded Pipe Fittings

Thick-Wall Stainless Steel Unthreaded Pipe

Thick-Wall Butt-Weld StainlessSteel Unthreaded Pipe Fittings

High-Pressure Stainless Steel Unthreaded Pipe Flanges

High-Pressure Stainless SteelUnthreaded SAE Pipe Flanges

High-Pressure Stainless Steel Bleed Rings

Extreme-Pressure Socket-ConnectStainless Steel Unthreaded Pipe Fittings

Extra-Thick-Wall Stainless Steel Unthreaded Pipe

Brass and Bronze Threaded Pipe and Pipe Fittings

High-Pressure Brass Threaded Pipe Fittings

High-Pressure Brass Threaded Pipe Nipples and Pipe

High-Pressure Brass ThreadedPipe Fittings with Sealant

High-Pressure Brass ThreadedPipe Nipples and Pipe with Sealant

High-Pressure Brass ThreadedPipe Fittings for Drinking Water

High-Pressure Brass Threaded PipeNipples and Pipe for Drinking Water

High-Pressure Plated Brass Threaded Pipe Fittings

High-Pressure Plated BrassThreaded Pipe Nipples and Pipe

Miniature High-Pressure Brass Threaded Pipe Fittings

Easy-Install High-Pressure Brass Threaded Pipe Fittings

Low-Pressure Brass and Bronze Threaded Pipe Fittings

Standard-Wall Brass Threaded Pipe Nipples and Pipe

Low-Pressure Brass andBronze Threaded Pipe Flanges

Low-Pressure Brass ThreadedPipe Fittings with Sealant

Standard-Wall Brass ThreadedPipe Nipples and Pipe with Sealant

Miniature Low-Pressure Brass Threaded Pipe Fittings

Low-Pressure Plated Brass Threaded Pipe Fittings

Standard-Wall Chrome-Plated BrassThreaded Pipe Nipples and Pipe

Medium-Pressure Plated Brass Threaded Pipe Fittings

Medium-Pressure Brass andBronze Threaded Pipe Fittings

Thick-Wall Brass Threaded Pipe Nipples and Pipe

Precision Extreme-PressureBrass Threaded Pipe Fittings

Precision Extreme-Pressure BrassThreaded Pipe Nipples and Pipe

Extreme-Pressure Brass Threaded Pipe Fittings

Brass and Bronze Unthreaded Pipe and Pipe Fittings

Brass and Bronze Unthreaded Pipe Flanges

Standard-Wall Brass Unthreaded Pipe

Bronze Unthreaded Pipe Fittings

Low-Pressure Iron and Steel Threaded Pipe and Pipe Fittings

Low-Pressure Iron and Steel Threaded Pipe Fittings

Standard-Wall Steel Threaded Pipe Nipples and Pipe

Standard-Wall Steel Pipe Nipples and Pipewith Right-Hand and Left-Hand Threads

Standard-Wall Steel ThreadedPipe Nipple and Pipe Assortments

Low-Pressure Steel Threaded Pipe Flanges

Low-Pressure Iron Threaded Pipe Fittingswith Right-Hand and Left-Hand Threads

FM-Approved Low-PressureCast Iron Threaded Pipe Fittings

FM-Approved Low-Pressure CastIron Threaded Pipe Flanges

Low-Pressure Cast Iron Threaded Pipe Fittings

Low-Pressure Galvanized Ironand Steel Threaded Pipe Fittings

Low-Pressure Galvanized SteelThreaded Pipe Fittings with Sealant

Standard-Wall Galvanized SteelThreaded Pipe Nipples and Pipe

Standard-Wall Galvanized Steel Pipe Nipplesand Pipe for Joining Dissimilar Metals

Standard-Wall Galvanized Steel ThreadedPipe Nipple and Pipe Assortments

Low-Pressure Galvanized Steel Threaded Pipe Flanges

Extreme-Pressure Steel Threaded Pipe and Pipe Fittings

Standard-Wall Stainless Steel
Threaded Pipe Nipples and Pipe

Premium Low-Pressure Stainless Steel
Threaded Pipe Fittings with Certification

Low-Pressure Stainless Steel
Threaded Pipe Fittings with Sealant

Standard-Wall Stainless Steel Threaded
Pipe Nipples and Pipe with Sealant

Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

Precision Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

Medium-Pressure Stainless
Steel Threaded Pipe Fittings

Miniature Medium-Pressure Stainless
Steel Threaded Pipe Fittings

Thick-Wall Stainless Steel
Threaded Pipe Nipples and Pipe

High-Pressure Stainless Steel
Threaded SAE Pipe Flanges

High-Pressure Stainless Steel
Threaded SAE Two-Piece Pipe Flanges

Standard-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Standard-Wall Stainless Steel
Unthreaded Pipe Nipples and Pipe

Low-Pressure Press-Connect Stainless
Steel Unthreaded Pipe Fittings

Low-Pressure Socket-Connect Stainless
Steel Unthreaded Pipe Fittings

Thin-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

High-Pressure Socket-Connect
Stainless Steel Unthreaded Pipe Fittings

Thick-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

High-Pressure Stainless Steel
Unthreaded SAE Pipe Flanges

Extreme-Pressure Socket-Connect
Stainless Steel Unthreaded Pipe Fittings

High-Pressure Brass Threaded
Pipe Fittings with Sealant

High-Pressure Brass Threaded
Pipe Nipples and Pipe with Sealant

High-Pressure Brass Threaded
Pipe Fittings for Drinking Water

High-Pressure Brass Threaded Pipe
Nipples and Pipe for Drinking Water

High-Pressure Plated Brass
Threaded Pipe Nipples and Pipe

Low-Pressure Brass and
Bronze Threaded Pipe Flanges

Low-Pressure Brass Threaded
Pipe Fittings with Sealant

Standard-Wall Brass Threaded
Pipe Nipples and Pipe with Sealant

Standard-Wall Chrome-Plated Brass
Threaded Pipe Nipples and Pipe

Medium-Pressure Brass and
Bronze Threaded Pipe Fittings

Precision Extreme-Pressure
Brass Threaded Pipe Fittings

Precision Extreme-Pressure Brass
Threaded Pipe Nipples and Pipe

Standard-Wall Steel Pipe Nipples and Pipe
with Right-Hand and Left-Hand Threads

Standard-Wall Steel Threaded
Pipe Nipple and Pipe Assortments

Low-Pressure Iron Threaded Pipe Fittings
with Right-Hand and Left-Hand Threads

FM-Approved Low-Pressure
Cast Iron Threaded Pipe Fittings

FM-Approved Low-Pressure Cast
Iron Threaded Pipe Flanges

Low-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

Low-Pressure Galvanized Steel
Threaded Pipe Fittings with Sealant

Standard-Wall Galvanized Steel
Threaded Pipe Nipples and Pipe

Standard-Wall Galvanized Steel Pipe Nipples
and Pipe for Joining Dissimilar Metals

Standard-Wall Galvanized Steel Threaded
Pipe Nipple and Pipe Assortments

Compact Extreme-Pressure
Steel Threaded Pipe Fittings

Compact Precision Extreme-Pressure
Steel Threaded Pipe Fittings

High-Pressure Steel Threaded
SAE Two-Piece Pipe Flanges

Extra-Thick-Wall Galvanized Steel
Threaded Pipe Nipples and Pipe

Medium-Pressure Pipe Fittings
for Joining Dissimilar Metals

Thick-Wall Galvanized Iron and Steel
Threaded Pipe Nipples and Pipe

Medium-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

Medium-Pressure Galvanized
Steel Threaded Pipe Flanges

Low-Pressure Press-Connect
Steel Unthreaded Pipe Fittings

High-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Extreme-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Standard-Wall Grooved-End
Steel Pipe Nipples and Pipe

Standard-Wall Aluminum
Threaded Pipe Nipples and Pipe

Miniature Medium-Pressure
Aluminum Threaded Pipe Fittings

Standard-Wall Butt-Weld Aluminum
Unthreaded Pipe Fittings

Standard-Wall Aluminum
Unthreaded Pipe Nipples and Pipe

Thin-Wall Socket-Connect
Aluminum Unthreaded Pipe Fittings

Thick-Wall Butt-Weld Aluminum
Unthreaded Pipe Fittings

Standard-Wall Copper-Nickel
Threaded Pipe Nipples and Pipe