Individual/Set Individual/Set |
|---|
|
For Removing For Removing |
|---|
|
For Thread Direction For Thread Direction |
|---|
|
Overall Length Overall Length |
|---|
Turns With Turns With |
|---|
|
For Maximum Screw Thread Diameter For Maximum ScrewThread Diameter |
|---|
For Screw Size For Screw Size |
|---|
Use with Drill Bit Size Use with Drill Bit Size |
|---|
For Minimum Screw Thread Diameter For Minimum ScrewThread Diameter |
|---|
Container Type Container Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Square Shank Size Square Shank Size |
|---|
Drill Bit Flute Direction Drill Bit Flute Direction |
|---|
|
Drill Bit Material Drill Bit Material |
|---|
|
Drill Bit Size Drill Bit Size |
|---|
|
|
|
For Pipe Material For Pipe Material |
|---|
|
Extra-Grip Extractors
Deep flutes provide a strong grip and reduced expansion of the part you need to extract. Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For Screw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Trade No. | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Each | |
For Right-Hand Threads | |||||||||
| 1 | 0.38"-0.39" | 3/8" (M10) | 1/8 | 13/64" | 1 1/2" | Wrench | Steel | 0000000 | 00000 |
| 2 | 0.48"-0.5" | 1/2" (M12) | 1/4 | 9/32" | 1 1/2" | Wrench | Steel | 0000000 | 00000 |
| 3 | 0.63"-0.78" | 5/8"-3/4" (M16-M20) | 3/8 | 13/32" | 1 3/4" | Wrench | Steel | 0000000 | 00000 |
| 4 | __ | __ | 1/2 | __ | 2" | Wrench | Steel | 0000000 | 00000 |
| 5 | 1.11"-1.25" | 1 1/8"-1 1/4" (M30) | 3/4 | 23/32" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
| 6 | 1.5"-1.77" | 1 1/2"-1 3/4" (M40-M42) | 1 | 29/32" | 2 3/4" | Wrench | Steel | 0000000 | 00000 |
| 7 | 1.97"-2" | 2" | 1 1/4 | 1 3/16" | 3 3/8" | Wrench | Steel | 0000000 | 00000 |
| 8 | 2.21"-2.5" | 2 1/4"-2 1/2" (M56) | 1 1/2 | 1 15/32" | 3 1/2" | Wrench | Steel | 0000000 | 00000 |
| 9 | 2.96"-3.5" | 3"-3 1/2" | 2 | 2 1/16" | 4 3/8" | Wrench | Steel | 0000000 | 000000 |
| 10 | 0.87"-1" | 7/8"-1" (M22-M24) | __ | 1/2" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
For Left-Hand Threads | |||||||||
| 1 | 0.38"-0.39" | 3/8" (M10) | 1/8 | 13/64" | 1 1/2" | Wrench | Steel | 0000000 | 0000 |
| 2 | 0.48"-0.5" | 1/2" (M12) | 1/4 | 9/32" | 1 1/2" | Wrench | Steel | 0000000 | 00000 |
| 3 | 0.63"-0.78" | 5/8"-3/4" (M16-M20) | 3/8 | 13/32" | 1 3/4" | Wrench | Steel | 0000000 | 00000 |
| 4 | __ | __ | 1/2 | __ | 2" | Wrench | Steel | 0000000 | 00000 |
| 5 | 1.11"-1.25" | 1 1/8"-1 1/4" (M30) | 3/4 | 23/32" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
| 6 | 1.5"-1.77" | 1 1/2"-1 3/4" (M42) | 1 | 29/32" | 2 3/4" | Wrench | Steel | 0000000 | 00000 |
| 7 | 1.97"-2" | 2" | 1 1/4 | 1 3/16" | 3 3/8" | Wrench | Steel | 0000000 | 00000 |
| 8 | 2.21"-2.5" | 2 1/4"-2 1/2" (M56) | 1 1/2 | 1 15/32" | 3 1/2" | Wrench | Steel | 0000000 | 00000 |
| 9 | 2.96"-3.5" | 3"-3 1/2" | 2 | 2 1/16" | 4 3/8" | Wrench | Steel | 0000000 | 000000 |
| 10 | 0.87"-1" | 7/8"-1" (M22-M24) | __ | 1/2" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
Extra-Grip Extractor Sets
Deep flutes provide a strong grip and reduced expansion of the part you need to extract. Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For Screw | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Trade No. | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Container Type | Each | |
For Right-Hand Threads | |||||||||||
| 5 | 1, 2, 3, 4, 5 | 0.38"-1.25" | 3/8"-1 1/4" (M10-M30) | 1/8-3/4 | 13/64", 9/32", 13/32", 23/32" | 1 1/2"-2 1/2" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
| 6 | 1, 2, 3, 4, 5, 6 | 0.38"-1.77" | 3/8"-1 3/4" (M10-M42) | 1/8-1 | 13/64", 9/32", 13/32", 23/32", 29/32" | 1 1/2"-2 3/4" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
| 7 | 1, 2, 3, 4, 5, 6, 10 | 0.38"-1.77" | 3/8"-1 3/4" (M10-M42) | 1/8-1 | 13/64", 9/32", 13/32", 23/32", 29/32", 1/2" | 1 1/2"-2 3/4" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
| 10 | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 | 0.38"-3.5" | 3/8"-3 1/2" (M10-M56) | 1/8-2 | 13/64", 9/32", 13/32", 23/32", 29/32", 1/2", 1 3/16", 1 15/32", 2 1/16" | 1 1/2"-4 3/8" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
Straight-Flute Extractors
These extractors provide the tightest fit and the most contact with the part to be removed but also cause the most expansion. Insert directly into pipe or drill a hole in a fitting. Tap the extractor in with a hammer and turn. The part will back out without damaging the threads around it.
| For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Each | |
For Right-Hand and Left-Hand Threads | ||||||
|---|---|---|---|---|---|---|
| 1/8 | 1/4" | 2 1/4" | Wrench | Steel | 0000000 | 000000 |
| 1/4 | 3/8" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
| 3/8 | 1/2" | 2 3/4" | Wrench | Steel | 0000000 | 00000 |
| 1/2 | 5/8" | 3" | Wrench | Steel | 0000000 | 00000 |
| 3/4 | 13/16" | 3 1/4" | Wrench | Steel | 0000000 | 00000 |
| 1 | 1 1/16" | 3 1/2" | Wrench | Steel | 0000000 | 00000 |
| 1 1/4 | 1 3/8" | 3 3/4" | Wrench | Steel | 0000000 | 00000 |
| 1 1/2 | 1 9/16" | 4" | Wrench | Steel | 0000000 | 00000 |
| 2 | 2 1/16" | 4 1/2" | Wrench | Steel | 0000000 | 000000 |
Straight-Flute Extractor Sets
These extractors provide the tightest fit and the most contact with the part to be removed but also cause the most expansion. Insert directly into pipe or drill a hole in a fitting. Tap the extractor in with a hammer and turn. The part will back out without damaging the threads around it.
Straight-Flute Extractor, Drill Bit, and Drill Bushing Sets
The extractors in this set are matched with the right drill bit sizes as well as bushings to help you drill a centered hole into the broken part. The straight-flute shape provides the tightest fit and the most contact but also causes the most expansion. Insert directly into pipe or drill a hole in a fitting. Tap the extractor in with a hammer and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Thread Dia. | Size | For Pipe Size | Overall Lg. | Turns With | Material | No. of Drill Bits Included | Drill Bit Size | No. of Drill Bushings Included | Container Type | Each | |
For Right-Hand and Left-Hand Threads | ||||||||||||
Right-Hand High-Speed Steel Drill Bits | ||||||||||||
| 5 | 0.24"-0.56" | 1/4"-9/16" (M6-M14) | __ | 2 3/8"-3 3/4" | Wrench | Steel | 5 | 1/8", 3/16", 1/4", 5/16", 11/32" | 10 | Plastic Case | 000000 | 0000000 |
| 14 | 0.24"-1" | 1/4"-1" (M6-M24) | 1/8-1 | 2 3/8"-4 3/4" | Wrench | Steel | 9 | 1/8", 3/16", 1/4", 5/16", 11/32", 7/16", 1/2", 5/8" | 40 | Plastic Case | 000000 | 000000 |
Extractors
Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Square Shank Size | Turns With | Material | Each | |
For Right-Hand Threads | ||||||||||
| 1 | 0.1"-0.25" | No. 8-1/4" (M2.5-M6) | __ | 5/64" | 2" | 0.115" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 2 | 0.22"-0.31" | No. 12-5/16" (M6-M8) | __ | 7/64" | 2 3/8" | 0.14" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 3 | 0.32"-0.47" | 5/16"-7/16" (M8-M12) | __ | 5/32" | 2 3/4" | 0.195" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 4 | 0.44"-0.56" | 7/16"-9/16" (M12-M14) | 1/8 | 1/4" | 3" | 0.245" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 5 | 0.56"-0.78" | 9/16"-3/4" (M14-M20) | 1/8, 1/4 | 9/32" | 3 3/8" | 0.343" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 5 1/4 | 0.67"-0.94" | 11/16"-15/16" (M18-M24) | 1/4 | 23/64" | 3 3/8" | 0.398" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 6 | 0.75"-1" | 3/4"-1" (M20-M24) | 3/8 | 13/32" | 3 3/4" | 0.452" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 6 3/8 | 0.94"-1.14" | 1"-1 1/8" (M24-M27) | 3/8 | 31/64" | 3 3/4" | 0.512" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 7 | 0.99"-1.37" | 1"-1 3/8" (M26-M33) | 1/2 | 17/32" | 4 1/8" | 0.56" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 7 1/2 | 1.13"-1.5" | 1 1/8"-1 1/2" (M30-M36) | 1/2 | 39/64" | 4 1/8" | 0.656" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 8 | 1.38"-1.75" | 1 3/8"-1 3/4" (M36-M42) | 3/4 | 13/16" | 4 3/8" | 0.75" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 9 | 1.75"-2.12" | 1 3/4"-2" (M48) | 1 | 1 1/16" | 4 5/8" | 0.89" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 10 | 2.13"-2.5" | 2 1/4"-2 1/2" (M56) | 1 1/4 | 1 5/16" | 5" | 0.972" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 11 | 2.49"-3" | 2 1/2"-3" | 1 1/2 | 1 9/16" | 5 5/8" | 1.125" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 12 | 3"-3.5" | 3"-3 1/2" | 2 | 1 15/16" | 6 1/4" | 1.319" | Wrench, Tap Wrench | Steel | 0000000 | 000000 |
Extractor Sets
Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Trade No. | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Square Shank Size | Turns With | Material | Container Type | Each | |
For Right-Hand Threads | ||||||||||||
| 4 | 5, 5 1/4, 6 3/8, 7 1/2 | 0.56"-1.5" | 9/16"-1 1/2" (M14-M36) | 1/8-1/2 | 17/64", 23/64", 31/64", 39/64" | 3 3/8"-4 1/8" | 0.343"-0.656" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
| 4 | 6, 7, 8, 9 | 0.75"-2.12" | 3/4"-2" (M20-M48) | 3/8-1 | 13/32", 17/32", 13/16", 1 1/16" | 3 3/4"-4 5/8" | 0.452"-0.890" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
| 5 | 1, 2, 3, 4, 5 | 0.1"-0.78" | No. 8-3/4" (M2.5-M20) | 1/8 | 5/64", 7/64", 5/32", 1/4", 17/64" | 2"-3 3/8" | 0.115"-0.343" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 00000 |
| 6 | 1, 2, 3, 4, 5, 6 | 0.1"-1" | No. 8-1" (M2.5-M24) | 1/8-3/8 | 5/64", 7/64", 5/32", 1/4", 17/64", 13/32" | 2"-3 3/4" | 0.115"-0.452" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 00000 |
| 6 | 5, 5 1/4, 6 3/8, 7 1/2, 8, 9 | 0.56"-2.12" | 9/16"-2" (M14-M48) | 1/8-1 | 17/64", 13/16", 1 1/16", 23/64", 31/64", 39/64" | 3 3/8"-4 5/8" | 0.343"-0.890" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
| 9 | 1, 2, 3, 4, 5, 6, 7, 8, 9 | 0.1"-2.12" | No. 8-2" (M2.5-M48) | 1/8-1 | 5/64", 7/64", 5/32", 1/4", 13/32", 17/32", 13/16", 1 1/16", 19/64" | 2"-4 1/2" | 0.115"-0.890" | Wrench, Tap Wrench | Steel | Plastic Case | 0000000 | 00000 |
Extractor and Drill Bit Sets
No more searching for the right drill bit sizes—these sets match them with the corresponding extractors. Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
Left-hand drill bits can also be used to extract.
For Screw | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Trade No. | Thread Dia. | Size | For Pipe Size | Overall Lg. | Square Shank Size | Turns With | Material | No. of Drill Bits Included | Drill Bit Size | Container Type | Each | |
For Right-Hand Threads | |||||||||||||
Right-Hand High-Speed Steel Drill Bits | |||||||||||||
| 6 | 1, 2, 3, 4, 5, 6 | 0.1"-1" | No. 8-1" (M2.5-M24) | 1/8-3/8 | 2"-3 3/4" | 0.157"-0.594" | Wrench, Tap Wrench | Steel | 6 | 5/64", 7/64", 5/32", 1/4", 13/32", 17/64" | Vinyl Pouch | 0000000 | 000000 |
Right-Hand Cobalt Steel Drill Bits | |||||||||||||
| 5 | 1, 2, 3, 4, 5 | 0.1"-0.78" | No. 8-3/4" (M2.5-M20) | 1/8 | 2"-3 3/8" | 0.125"-0.438" | Wrench, Tap Wrench | Steel | 5 | 5/64", 7/64", 5/32", 1/4", 19/64" | __ | 0000000 | 00000 |
Left-Hand Cobalt Steel Drill Bits | |||||||||||||
| 5 | 1, 2, 3, 4, 5 | 0.1"-0.78" | No. 8-3/4" (M2.5-M20) | 1/8 | 2"-3 3/8" | 0.125"-0.438" | Wrench, Tap Wrench | Steel | 5 | 5/64", 7/64", 5/32", 1/4", 19/64" | Metal Case | 0000000 | 00000 |
Case for Spiral-Flute Extractors and Drill Bits
Store your extractors and corresponding drill bits.
For Extractors | For Drill Bits | ||||||
|---|---|---|---|---|---|---|---|
| Number of | Trade Number | Flute Style | Number of | Size | Material | Each | |
| 5 | 1, 2, 3, 4, 5 | Spiral | 5 | 5/64", 7/64", 5/32", 1/4", 19/64" | Steel | 00000000 | 00000 |
Extractor Sets for Soft Materials and Thin-Walled Parts
The tapered wedge shape of these extractors won’t expand the broken part, making it easier to remove. After drilling, tap in with a hammer and turn. The part will back out without damaging the threads around it.
For Screw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Each | |
For Right-Hand and Left-Hand Threads | |||||||||
| 5 | 0.25"-0.62" | 1/4"-5/8" | __ | 1/8", 3/16", 15/64", 5/16", 3/8" | 2 3/8"-3 3/8" | Wrench | Steel | 0000000 | 000000 |
| 6 | 0.19"-0.78" | 3/16"-3/4" (M5-M20) | 1/8-1/2 | 3/16", 15/64", 5/16", 3/8", 9/64", 15/32" | 2"-3 3/4" | Wrench | Steel | 0000000 | 00000 |
Extractors for Soft Materials and Thin-Walled Parts
The tapered wedge shape of these extractors won’t expand the broken part, making it easier to remove. After drilling, tap in with a hammer and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Each | |
For Right-Hand and Left-Hand Threads | ||||||||
| 0.19"-0.31" | 3/16"-5/16" (M5-M8) | __ | 9/64" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
| 0.38"-0.39" | 3/8" (M10) | __ | 3/16" | 2 5/8" | Wrench | Steel | 0000000 | 0000 |
| 0.43"-0.44" | 7/16" | __ | 15/64" | 3" | Wrench | Steel | 0000000 | 0000 |
| 0.48"-0.56" | 1/2"-9/16" (M12-M14) | 1/8 | 5/16" | 3 1/8" | Wrench | Steel | 0000000 | 0000 |
| 0.62"-0.63" | 5/8" (M16) | 1/4 | 3/8" | 3 3/8" | Wrench | Steel | 0000000 | 0000 |
| 0.75"-0.78" | 3/4" (M20) | 3/8 | 15/32" | 4" | Wrench | Steel | 0000000 | 0000 |
| 1"-1.12" | 1"-1 1/8" (M26-M27) | 1/2 | 21/32" | 4 7/8" | Wrench | Steel | 0000000 | 00000 |
| 1.23"-1.37" | 1 1/4"-1 3/8" (M33) | 3/4 | 13/16" | 5 3/8" | Wrench | Steel | 0000000 | 00000 |
| 0.87" | 7/8" (M22) | 1/2 | 9/16" | 4 3/4" | Wrench | Steel | 0000000 | 00000 |
| 1.5" | 1 1/2" | 1 | 1 1/16" | 5 1/2" | Wrench | Steel | 0000000 | 00000 |
Extractor and Drill Bit Sets for Soft Materials and Thin-Walled Parts
The tapered wedge shape of these extractors won’t expand the broken part, making it easier to remove. Sets include the matching drill bit sizes. After drilling, tap in with a hammer and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Thread Dia. | Size | For Pipe Size | Overall Lg. | Turns With | Material | No. of Drill Bits Included | Drill Bit Size | Each | |
For Right-Hand and Left-Hand Threads | ||||||||||
Right-Hand Cobalt Steel Drill Bits | ||||||||||
| 5 | 0.19"-0.63" | No. 10-5/8" (M5-M16) | 1/8-3/8 | 2"-3 3/8" | Wrench | Steel | 5 | 9/64", 3/16", 15/64", 5/16", 3/8" | 0000000 | 000000 |
| 6 | 0.19"-0.78" | No.10-3/4" (M5-M20) | 1/8-1/2 | 2"- 3 3/4" | Wrench | Steel | 6 | 9/64", 3/16", 15/64", 5/16", 3/8", 15/32" | 0000000 | 00000 |
Socket-Saving Plastic Pipe Extractors
Drill old pipe stubs out of fittings when replacing plastic pipe. These extractors let you reuse difficult-to-remove fittings, such as those in concrete floors, and install new pipe. Attach them to a square-drive power drill. Use the washer on the tip of these extractors to guide them down the center of pipe stubs. The cutter is sized to match the ID of your pipe fitting, so the blades remove all of the pipe and none of the fitting. The blades are angled to propel chips backwards so you don’t have to fish them out.
For technical drawings and 3-D models, click on a part number.
For Pipe | Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Schedule | Material | Washer Dia. | Overall Lg. | Type | Square Size | Turns With | Material | Each | |
| 1/2 | 40 | ABS Plastic, PVC Plastic | 9/16" | 5" | Square | 0.313" | Power Drill | Steel | 0000000 | 000000 |
| 3/4 | 40 | ABS Plastic, PVC Plastic | 3/4" | 5" | Square | 0.313" | Power Drill | Steel | 0000000 | 00000 |
| 1 | 40 | ABS Plastic, PVC Plastic | 1" | 5" | Square | 0.313" | Power Drill | Steel | 0000000 | 00000 |
| 1 1/2 | 40 | ABS Plastic, PVC Plastic | 1 9/16" | 5 3/4" | Square | 0.375" | Power Drill | Steel | 0000000 | 00000 |
| 2 | 40 | ABS Plastic, PVC Plastic | 2 1/16" | 5 3/4" | Square | 0.375" | Power Drill | Steel | 0000000 | 00000 |
| 3 | 40 | ABS Plastic, PVC Plastic | 3" | 5 3/4" | Square | 0.5" | Power Drill | Steel | 0000000 | 00000 |
| 4 | 40 | ABS Plastic, PVC Plastic | 4" | 5 3/4" | Square | 0.5" | Power Drill | Steel | 0000000 | 00000 |
Internal Knurled-Grip Extractor Sets
Insert these extractors into a pipe or fitting and turn with a wrench—the knurls will grip the part so you can twist it out.
| No. of Extractors Included | For Pipe Size | Overall Lg. | Turns With | Material | Container Type | Each | |
For Right-Hand and Left-Hand Threads | |||||||
|---|---|---|---|---|---|---|---|
| 4 | 3/8-1 | 3" | Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
Internal Knurled-Grip Extractors
Insert these extractors into a pipe or fitting and turn with a wrench—the knurls will grip the part so you can twist it out.