About Backflow-Prevention Valves
More
About Actuated On/Off Valves
More
About On/Off Valves
More
How to Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Flow-Control Orifices for Chemicals
- For Use With: Air, Ammonia, Sodium Hydroxide, Beverage, Carbon Dioxide, Diesel Fuel, Water, Oil, Ethylene Glycol, Food, Hydrochloric Acid, Kerosene, Liquid Carbon Dioxide, Methanol, Soap Solutions, Methyl Ethyl Ketone, Mineral Spirits, Natural Gas, Oxygen, Nitric Acid
- Max. Pressure: 120 psi @ 75° F
- Temperature Range: 40° to 140° F
Made of PVC, these orifices have excellent resistance to a wide range of corrosive chemicals. Also known as flow restrictors and precision orifice valves, they are used to throttle, vent, bleed, or regulate the flow of liquids and gases. They automatically adjust to changing inlet pressure to maintain consistent outlet flow.
For technical drawings and 3-D models, click on a part number.
Threaded On/Off Valves with Garden Hose Outlet
- Valve Type: Ball
- For Use With:
Brass Body: Water, Air, Helium, Butane, Ethanol, Ethylene Glycol, Gasoline, Kerosene, Mineral Spirits, Natural Gas, Propane, Soap Solutions, Methanol
Nickel-Plated Brass Body: Water, Air, Helium, Butane, Ethanol, Ethylene Glycol, Gasoline, Kerosene, Mineral Spirits, Natural Gas, Propane, Soap Solutions, Isopropyl Alcohol
Turn the flow to any garden hose on and off. These valves have garden hose threads, which are a standard size, so they're universally compatible with all standard garden hoses. They do not restrict flow when open—they’re full port.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Handle Material | Seal Material | End-to-End Lg. | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female Inlet × GHT Male Outlet | |||||||||
| 3/4 | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Buna-N Rubber | 1 7/8" | 00000000 | 000000 |
GHT Female Inlet × GHT Male Outlet | |||||||||
| __ | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Buna-N Rubber | 1 7/8" | 00000000 | 00000 |
Compact Threaded On/Off Valves for Chemicals
For chemical-processing applications in confined areas, these valves have a low-profile handle to fit in tight spots. A rubber seal and a plastic body stand up to aggressive, corrosive solutions.
Polypropylene valves are the most chemical resistant. They handle a wide range of acids, solvents, and other harsh substances.
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: See table
- Seal Material: See table
| Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | Seal Material | End-to-End Lg. | For Use With | Each | |
NPT Female × NPT Female | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8 | 3.3 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 1 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 000000 |
| 1/4 | 2.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 1 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 7 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 3/8 | 9.1 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 1/2 | 8.1 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 5/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/2 | 10.3 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 3/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | Not Rated | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | 16.5 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 1/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide, Water | 00000000 | 00000 |
NPT Female × NPT Male | |||||||||
| 1/8 | Not Rated | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 2.6 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 3/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 3/4 | 10.3 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 3/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | 16.3 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 1/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide, Water | 00000000 | 00000 |
NPT Male × NPT Female | |||||||||
| 1/4 | 1.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 3/8 | 6.2 | Full | 125 psi @ 140° F | -35° to 140° | Buna-N Rubber | 3 1/16" | Air, Citric Acid, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Soap Solutions, Water, Xenon | 000000000 | 0000 |
| 3/8 | 6.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 0000000 | 0000 |
| 1/2 | 6.9 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 7/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/2 | 9.5 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 5/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
NPT Male × NPT Male | |||||||||
| 1/8 | 1.5 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 5/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 2.3 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
Ultra-Chemical-Resistant Threaded On/Off Valves
The most chemical-resistant threaded valves we offer, these have a PTFE seal and an alloy body that can withstand extremely aggressive and corrosive chemicals, such as methyl ethyl ketone and toluene. They are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Acetone, Air, Butane, Carbon Dioxide, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Kerosene, Methanol, Methyl Ethyl Ketone, Nitrogen, Propane, Soap Solutions, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: Alloy 20 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
Threaded Isolation On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol, Neon, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PEEK Plastic
- Specifications Met: ASME B16.34
Attach gauges or sensors to these valves so you can remove them for maintenance and calibration without depressurizing your line. Also known as block and bleed valves, turn the handles to block both upstream and downstream flow, drain the liquid trapped in the valve through the bleed port, and then remove your instrument from the gauge port. Often used in chemical-processing lines, these valves have a PTFE seal and a corrosion-resistant 316 stainless steel body. All are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Gauge Port | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Each | |
316 Stainless Steel Body | ||||||||
NPT Female × NPT Female | ||||||||
| 1/2 | 1/4 | Female | NPT | 6.4 | 10000 psi @ 170° F | -65° to 450° | 0000000 | 0000000 |
Easy-to-Install Threaded On/Off Valves for Chemicals
For fast installation and removal from pipelines, these valves have union fittings that disassemble into multiple pieces. All have a plastic body that can stand up to aggressive and corrosive solutions in chemical-processing applications.
Flow-indicating T-handles show the percentage the valve is open.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: See table
- Ball Material: PVC Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: PTFE Plastic
| Pipe Size | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | For Use With | Each | |
Threaded Union × Threaded Union with Flow-Indicating T-Handle | |||||||
|---|---|---|---|---|---|---|---|
| 1/2 | 150 psi @ 65° F | 35° to 140° | Standard | 4 1/8" | Ammonia, Butane, Citric Acid, Hydrochloric Acid, Methanol, Nitric Acid, Phosphoric Acid, Salt Water, Sodium Hydroxide, Water | 000000 | 0000000 |
Easy-Maintenance Threaded On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Methanol, Methyl Ethyl Ketone, Phosphoric Acid, Salt Water, Sodium Hydroxide, Water
- Ball Material: Polypropylene Plastic
- Seal Material: See table
- Seat Material: PTFE Plastic
No need to remove these valves from your line to access their internal components—the three-piece bolted body comes apart. Ideal in chemical-processing applications, the seal and polypropylene body stand up to aggressive and corrosive solutions.
Valves with a lever handle give you more leverage than valves with T-handles, so you can quickly open and close them with ease. To limit access to your line, replace the handle with a locking handle (sold separately). Fix the handle in place using a padlock (not included) with a shackle diameter up to 19/64". Valves with a T-handle are more compact than valves with a lever handle, so they fit in tighter spots. They also resist accidental movement when snagged or bumped.
Valves with a cam-and-groove male plug quickly connect and disconnect medium- to large-diameter hose lines. Insert the plug end into a cam-and-groove female socket.
Valves with a fluoroelastomer seal fit snug even when surfaces are irregular, misaligned, or dirty. The seal compresses and conforms to create a tight, leakproof connection. Pick valves with a PTFE seal if you frequently need to open and close valves. The seal is slippery to reduce friction and prevent wear.
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
For technical drawings and 3-D models, click on a part number.
Valves | Locking Handles | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Coupling Size | Plug OD | Max. Pressure | Temperature Range, °F | Seal Material | Port Type | End-to-End Lg. | Each | Each | ||
Black Polypropylene Plastic Body with Lever Handle | |||||||||||
NPT Female × NPT Female | |||||||||||
| 1/2 | __ | __ | 300 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 3 7/16" | 0000000 | 000000 | 000000 | 00 |
| 3/4 | __ | __ | 300 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 3 7/16" | 0000000 | 00000 | 000000 | 00 |
| 1 | __ | __ | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Standard | 3 7/16" | 0000000 | 00000 | 000000 | 00 |
| 1 | __ | __ | 300 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 4 3/16" | 0000000 | 00000 | 000000 | 00 |
| 1 | __ | __ | 300 psi @ 70° F | 0° to 150° | PTFE Plastic | Full | 4 1/8" | 00000000 | 000000 | 000000 | 00 |
| 1 1/4 | __ | __ | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 4 11/16" | 0000000 | 00000 | 00000000 | 000000 |
| 1 1/4 | __ | __ | 300 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Standard | 4 3/16" | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/2 | __ | __ | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 4 11/16" | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/2 | __ | __ | 225 psi @ 70° F | 0° to 150° | PTFE Plastic | Standard | 4 5/8" | 00000000 | 000000 | 00000000 | 00000 |
| 2 | __ | __ | 150 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 5 3/8" | 00000000 | 00000 | 000000 | 00 |
| 2 | __ | __ | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Standard | 4 11/16" | 0000000 | 00000 | 00000000 | 00000 |
| 2 | __ | __ | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 5 1/2" | 0000000 | 00000 | 00000000 | 00000 |
| 3 | __ | __ | 200 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 6 3/8" | 0000000 | 000000 | 00000000 | 00000 |
| 3 | __ | __ | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Standard | 6 1/16" | 0000000 | 000000 | 00000000 | 00000 |
| 4 | __ | __ | 100 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Standard | 7 7/8" | 0000000 | 000000 | 00000000 | 00000 |
NPT Male × Cam-and-Groove Male Plug | |||||||||||
| 2 | 2 | 2 7/16" | 150 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 8 1/4" | 00000000 | 00000 | 000000 | 00 |
| 2 | 2 | 2 7/16" | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 8 1/8" | 00000000 | 00000 | 00000000 | 00000 |
Black Polypropylene Plastic Body with T-Handle | |||||||||||
NPT Female × NPT Female | |||||||||||
| 3/4 | __ | __ | 300 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 3 3/8" | 00000000 | 00000 | 000000 | 00 |
Flanged On/Off Valves for Chemicals
Bolt these valves to ANSI flanges—they meet ASME dimensional standards. They have a plastic body and a seal that withstand aggressive and corrosive solutions in chemical-processing applications.
Glass-filled vinyl ester valves stand up to a wide variety of harsh acids and solvents. You can rely on them for repeated use, changes in pressure and flow rate, and hot and cold conditions.
Valves with a lockable lever handle can be fixed in place with a padlock (not included). They give you more leverage than short lever handles, so you can quickly open and close the valve with minimal effort.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene, Water, Xylene
- Ball Material: Glass-Filled Vinyl Ester
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Packing Material: PTFE Plastic
- For Flange Specifications Met: ASME B16.5, ASME B16.10
Bolts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Pressure Class | Flange OD | Circle Dia. | No. of Holes | Hole Dia. | Included | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | For Max. Shackle Dia. | Each | |
Flanged × Flanged | |||||||||||||||
| 1 | 150 | 4 1/4" | 3 1/8" | 4 | 5/8" | No | 45 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 5" | 5/16" | 0000000 | 0000000 |
| 1 1/2 | 150 | 5" | 3 7/8" | 4 | 5/8" | No | 115 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 6 1/2" | 1/4" | 00000000 | 000000 |
| 2 | 150 | 6" | 4 3/4" | 4 | 3/4" | No | 165 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 7" | 5/16" | 0000000 | 000000 |
| 3 | 150 | 7 1/2" | 6" | 4 | 3/4" | No | 350 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 8" | 5/16" | 0000000 | 00000000 |
| 4 | 150 | 9" | 7 1/2" | 4 | 3/4" | No | 540 | 150 psi @ 100° F | -50° to 215° | 29.9 | Standard | 9" | 1/4" | 00000000 | 00000000 |
Flanged Gradual On/Off Valves for Thick Liquids and Dry Materials
- Valve Type: Gate
- For Use With: Air, Argon, Deionized Water, Ethanol, Ethylene Glycol, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Salt Water, Soap Solutions, Water, Xenon
These valves have a sharp gate that slices through thick slurries, wastewater, dry bulk solids, and other materials that would clog other gradual on/off valves. They bolt to flanges and gradually open and close to prevent system damage from suddenly starting and stopping flow. The wheel handle opens and closes the valve with multiple turns, providing controlled, shock-resistant flow. The rising stem lifts as the valve opens and lowers as the valve closes to provide a visual indication of whether flow is on or off. The stem is isolated from the process media for a long service life.
For technical drawings and 3-D models, click on a part number.
O'all | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | Bolt Hole Dia. | Bolt Circle Dia. | No. of Bolt Holes | Bolts Included | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Ht. | Lg. | Stem Type | Each | |
Ductile Iron Body—316 Stainless Steel Gate | |||||||||||||
| 3 | 7 1/2" | 5/8" | 6" | 4 | No | 150 psi @ 248° F | -22° to 248° | 2 1/4" | 23" | 7 1/16" | Rising | 0000000 | 000000000 |
| 4 | 9" | 5/8" | 7 1/2" | 8 | No | 150 psi @ 248° F | -22° to 248° | 2 1/4" | 29 7/16" | 6 3/4" | Rising | 0000000 | 00000000 |
| 6 | 11" | 3/4" | 9 1/2" | 8 | No | 150 psi @ 248° F | -22° to 248° | 2 1/2" | 34 7/16" | 9 3/8" | Rising | 0000000 | 00000000 |
Flanged Air-Driven On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Neon, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Steam, Xenon, Citric Acid, Krypton
- Ball Material: 316 Stainless Steel
- Seal Material : PTFE Plastic
- Seat Material: PTFE Plastic
- Actuator Housing Material: Aluminum
- Specifications Met: ASME B16.34
A 316 stainless steel body and a PTFE seal stand up to aggressive and corrosive solutions in chemical-processing applications. Their ball-valve design allows these valves to handle at least three times the flow of standard flanged valves. For faster actuation than motor-driven valves, they operate on compressed air. You must control the air to the actuator using either the included electric pilot valve or a manual on/off valve (not included). These valves automatically start and stop flow and don't require a minimum pressure drop between the inlet and outlet for operation.
Valves are full port, so they do not restrict flow. The actuator is secured to the valve body with a bracket for easy disassembly, maintenance, and repair. A visual flow indicator on the top of the actuator shows whether the valve is open or closed. The manual override allows you to operate the valve during power outages.
Single-acting actuators only require air pressure to open the valve; they automatically spring closed when the air turns off. These valves are normally closed unless actuated. Double-acting actuators require air pressure to open and close the valve. Once actuated, these valves remain actuated until air pressure is applied to close them, so they do not have a valve starting position.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Bolts | Air | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Flange OD | No. of Holes | Hole Size | Included | Circle Dia. | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Connection | Pressure Range, psi | Each | |
316 Stainless Steel Body with Screw Terminals | |||||||||||||||||
Single Acting: Air-to-Open, Spring Return (Normally Closed)—120V AC | |||||||||||||||||
| 2 | Female | 6" | 4 | 0.551" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 14" | 1/4 NPT Female | 40 to 115 | 0000000 | 000000000 |
| 3 | Female | 7 1/2" | 4 | 0.551" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 18 5/16" | 1/4 NPT Female | 40 to 115 | 0000000 | 00000000 |
Double Acting: Air-to-Close, Air-to-Open—120V AC | |||||||||||||||||
| 2 | Female | 6" | 4 | 0.551" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 13" | 1/4 NPT Female | 40 to 115 | 0000000 | 000000 |
| 3 | Female | 7 1/2" | 4 | 0.551" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 15 1/4" | 1/4 NPT Female | 40 to 115 | 0000000 | 00000000 |
Flanged Motor-Driven On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Neon, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Steam, Xenon, Citric Acid, Krypton
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Actuator Housing Material: Aluminum
- Specifications Met: ASME B16.34
For high-flow chemical-processing applications, these valves have a ball-valve design that provides at least three times the flow of standard flanged valves. They have a 316 stainless steel body and a PTFE seal that can stand up to aggressive and corrosive solutions. Valves operate on electricity to automatically start and stop flow. They don’t require a minimum pressure drop between the inlet and outlet for operation. All are fail in place; upon the loss of power, the valve will remain in its current position. Valves are full port, so they do not restrict flow.
The actuator is secured to the valve body with a bracket for easy disassembly, maintenance, and repair. A visual flow indicator on the top of the actuator shows whether the valve is open or closed. Two single pole, double throw (SPDT) auxiliary switches allow you to connect these valves to temperature-monitoring equipment, programmable logic controllers, or conveyor sirens. The internal heater automatically turns on when the valve is actuated to prevent motor damage caused by condensation buildup. The manual override allows you to operate the valve during power outages.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Bolts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Flange OD | No. of Holes | Hole Size | Included | Circle Dia. | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Each | |
316 Stainless Steel Body with Screw Terminals | |||||||||||||||
Fail in Place—24V AC/24V DC | |||||||||||||||
| 2 | Female | 6" | 4 | 5/8" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 19 1/16" | 0000000 | 000000000 |
| 3 | Female | 7 1/4" | 4 | 5/8" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 22 5/8" | 0000000 | 00000000 |
Fail in Place—120V AC | |||||||||||||||
| 2 | Female | 6" | 4 | 5/8" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 19 1/16" | 0000000 | 00000000 |
| 3 | Female | 7 1/4" | 4 | 5/8" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 22 5/8" | 0000000 | 00000000 |
Versa-Mount Air-Driven On/Off Valves for Chemicals
- Valve Type: Piston
- For Use With: Water, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Nitric Acid, Salt Water, Sodium Hypochlorite, Citric Acid, Phosphoric Acid, Deionized Water, Ethanol, Methanol, Mineral Spirits, Soap Solutions
- Seal Material : Fluoroelastomer Rubber
With a chemical-resistant fluoroelastomer seal and no metal parts to corrode, these valves are often used in chemical-processing and water-treatment applications. The lightweight actuator and compact body are designed for installation in any mounting orientation. All valves operate on compressed air to automatically start and stop flow. You must control the air to the actuator using either an electric pilot valve (not included) or a manual on/off valve (not included). These valves don’t require a minimum pressure drop between the inlet and outlet for operation.
All have a single-acting actuator that only requires air pressure to open the valve; they automatically spring closed when the air turns off. The actuator is directly mounted to the valve body to minimize movement and reduce wear. These valves are normally closed unless actuated.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Air | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Dia. | O'all Ht. | Connection | Pressure Range, psi | No. of Mounting Holes | Mounting Hole Thread Size | Fasteners Included | Each | |
Dark Gray PVC Plastic Body | |||||||||||||||
Single Acting: Air-to-Open, Spring Return (Normally Closed) | |||||||||||||||
| 1/2 | Female | NPT | 28 | 150 psi @ 70° F | Zero Pressure Drop | 35° to 140° | 3" | 3 5/16" | 1/8 NPT Female | 40 to 80 | 4 | 1/4"-20 | No | 0000000 | 0000000 |
| 3/4 | Female | NPT | 45 | 150 psi @ 70° F | Zero Pressure Drop | 35° to 140° | 4" | 5" | 1/8 NPT Female | 40 to 80 | 4 | 3/8"-16 | No | 0000000 | 000000 |
| 1 | Female | NPT | 75 | 150 psi @ 70° F | Zero Pressure Drop | 35° to 140° | 4" | 5" | 1/8 NPT Female | 40 to 80 | 4 | 3/8"-16 | No | 0000000 | 000000 |
White Polypropylene Plastic Body | |||||||||||||||
Single Acting: Air-to-Open, Spring Return (Normally Closed) | |||||||||||||||
| 1/2 | Female | NPT | 28 | 150 psi @ 85° F | Zero Pressure Drop | 0° to 180° | 3" | 3 5/16" | 1/8 NPT Female | 40 to 80 | 4 | 1/4"-20 | No | 0000000 | 000000 |
| 3/4 | Female | NPT | 45 | 150 psi @ 85° F | Zero Pressure Drop | 0° to 180° | 4" | 5" | 1/8 NPT Female | 40 to 80 | 4 | 3/8"-16 | No | 0000000 | 000000 |
| 1 | Female | NPT | 75 | 150 psi @ 85° F | Zero Pressure Drop | 0° to 180° | 4" | 5" | 1/8 NPT Female | 40 to 80 | 4 | 3/8"-16 | No | 0000000 | 000000 |
| 120V AC Pilot Valve | 00000000 | Each | 0000000 |
Severe-Duty Air-Driven On/Off Valves for Chemicals
- Valve Type: Diaphragm
- For Use With:
Pipe Size 1/4: Oil, Air, Propane, Butane, Acetone, Ammonia, Carbon Dioxide, Chlorine, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Nitric Acid, Nitrogen, Oxygen, Sodium Hypochlorite, Sulfuric Acid, Toluene, Citric Acid, Phosphoric Acid, Sodium Hydroxide
Pipe Size 1/2: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Ammonia, Carbon Dioxide, Chlorine, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Sodium Hypochlorite, Steam, Sulfuric Acid, Toluene, Citric Acid, Phosphoric Acid, Sodium Hydroxide
Pipe Size 3/4: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Ammonia, Carbon Dioxide, Chlorine, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Sodium Hypochlorite, Steam, Sulfuric Acid, Toluene, Citric Acid, Phosphoric Acid, Sodium Hydroxide - Seal Material : PTFE Plastic
- Seat Material: PTFE Plastic
- Actuator Housing Material: Plastic
Also known as diaphragm valves, these have a PTFE body and seals that stand up to harsh acidic solutions. The diaphragm can handle dirty liquid, slurries, and abrasive media without damage. All valves operate on compressed air to automatically start and stop flow. You must control the air to the actuator using either an electric pilot valve (not included) or a manual on/off valve (not included). These valves don’t require a minimum pressure drop between the inlet and outlet for operation.
All have a single-acting actuator that only requires air pressure to open the valve; they automatically spring closed when the air turns off. The actuator is directly mounted to the valve body to minimize movement and reduce wear. Valves are normally closed unless actuated.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Air | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Connection | Pressure Range, psi | Mounting Stud Screw Size | No. of Mounting Studs | Fasteners Included | Each | |
PTFE Plastic Body | |||||||||||||||
Single Acting: Air-to-Open, Spring Return (Normally Closed) | |||||||||||||||
| 1/4 | Female | NPT | 0.7 | 60 psi @ 140° F | Zero Pressure Drop | 35° to 175° | 2 1/8" | 2 7/8" | 1/8 NPT Female | 40 to 60 | __ | 2 | No | 00000000 | 0000000 |
| 1/2 | Female | NPT | 2.8 | 60 psi @ 140° F | Zero Pressure Drop | 35° to 210° | 2 3/4" | 3 3/8" | 1/8 NPT Female | 60 to 80 | 1/4" | 2 | No | 00000000 | 000000 |
| 120V AC Pilot Valve | 00000000 | Each | 0000000 |
Pipeline Fluid Blockers
Also known as pipe blinds, these fluid blockers fit between two flanges to stop flow, so you can work downstream without draining the system.
Paddle blinds slip between the flanges to temporarily block flow.
304 stainless steel blinds resist corrosion better than steel blinds.
For technical drawings and 3-D models, click on a part number.
Handle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | OD | For Orifice Flange ANSI Class | Max. Pressure | Thick. | Lg. | Wd. | Temp. Range, °F | Specifications Met | Each | |
304 Stainless Steel | ||||||||||
| 8 | 11" | 150 | 150 psi @ 70° F | 1/4" | 7" | 1" | -100° to 400° | __ | 0000000 | 0000000 |
| 10 | 13 3/8" | 150 | 150 psi @ 70° F | 3/8" | 7" | 1 1/2" | -100° to 400° | __ | 0000000 | 000000 |
| 12 | 16 1/8" | 150 | 150 psi @ 70° F | 3/8" | 7" | 1 1/2" | -100° to 400° | __ | 0000000 | 000000 |
PTFE-Coated 304 Stainless Steel | ||||||||||
| 1/2 | 1 7/8" | 150 | 150 psi @ 250° F | 1/8" | 2" | 3/4" | -100° to 400° | ASTM D4894, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 |
| 3/4 | 2 1/4" | 150 | 150 psi @ 250° F | 1/8" | 2" | 3/4" | -100° to 400° | ASTM D4894, FDA Compliant 21 CFR 177.1550 | 0000000 | 00000 |