Use these corrosion-resistant fittings in a low-pressure pipe line.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

The male threads on these fittings have a sealant applied for extra leak protection.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Also known as ANSI flanges.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Create an access point in systems operating up to 230 psi where corrosion is a concern. Made of stainless steel, these bleed rings resist rusting.

Typically used with thin-wall stainless steel unthreaded pipe fittings.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Typically used with thick-wall and high-pressure stainless steel unthreaded pipe fittings.

The strongest socket-connect fittings we offer, these heavy duty forged fittings are also known as Pressure Class 6000.

Use these fittings for low-pressure applications in noncorrosive environments.

Assortments contain threaded pipe in various lengths.

These flanges are for low-pressure applications in noncorrosive environments.

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

The male threads on these fittings have a sealant applied for extra leak protection.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Tap into your line in systems operating up to 1,400 psi to vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.

Typically used with extreme-pressure iron and steel unthreaded pipe fittings. Pipe is also known as Schedule XXH .

These brass fittings have the strength to handle high-pressure applications.

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Install and remove these high-pressure brass fittings with a socket wrench or hex key (sold separately).

Typically used with low-pressure brass and bronze threaded pipe fittings.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

Typically used with medium-pressure brass and bronze threaded pipe fittings.

Typically used with precision extreme-pressure brass and bronze threaded pipe fittings.

Also known as Silbraze fittings.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Their small size makes these miniature fittings a good choice for cramped, confined spaces.

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Thick walls give these Schedule 80 fittings excellent strength.

These fittings have excellent resistance to stress cracking and have better corrosion resistance than most stainless steel alloys.

Also known as Pressure Class 200 fittings.

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

With excellent corrosion resistance, this pipe can handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. Layers of fiberglass give this pipe better strength and durability than any of our other pipe for chemicals.

These all-metal expansion joints can handle high temperatures up to 800° F.

Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line.

Joints are for one-way flow and are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

Joints are for two-way flow and are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

Use in low-pressure applications up to 150 psi.

Repair leaks in copper tubing.

Install these fittings into threaded holes.

Dispense from grease guns into grease fittings and bare lubrication points.

Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.