Use these corrosion-resistant fittings in a low-pressure pipe line.

Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with medium- to high-pressure stainless steel threaded pipe fittings.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Use these fittings for low-pressure applications in noncorrosive environments.

Assortments contain threaded pipe in various lengths.

The threads on these fittings have clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

A plastic sleeve prevents destructive corrosion when connecting different metals.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Also known as Pressure Class 6000 fittings, these heavy duty forged fittings are the strongest steel fittings we offer.

These brass fittings have the strength to handle high-pressure applications.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Typically used with low-pressure brass and bronze threaded pipe fittings.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

Typically used with medium-pressure brass and bronze threaded pipe fittings.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Typically used with standard-wall aluminum unthreaded pipe fittings.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Thick walls give these Schedule 80 fittings excellent strength.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Use for pressures up to 60 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line.

Joints are for two-way flow and are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Metal hose fittings have better durability than plastic barbed hose fittings.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

A single rounded bead grips onto hose just like a barb, but has no sharp edges that could cut or damage soft hose. Slide the beaded end into hose and secure with a clamp. Use in coolant applications up to 300 psi.

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Protect internally threaded NPT connections from contaminants during fabrication and storage.

Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.

Attach conduit to a knockout in an outlet box or enclosure.

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.