3 1/2 Pipe Size Fittings

Filter by

System of Measurement

Pipe Size

Fitting Type

Material

Fitting Connection

Thread Type

For Use With

Shape

Pipe Schedule

Pipe Material

Maximum Steam Pressure @ Temperature

Length

Specifications Met

Connects To

Gender

DFARS Compliance

Pressure Class

Maximum Pressure @ Temperature

REACH Compliance

Number of Bolt Holes

RoHS Compliance

Flange Material

Flanged Connection Surface

Forward

How can we improve?

67 Products

About Durometer Hardness Scales

About Backflow-Prevention Valves

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

For technical drawings and 3-D models, click on a part number.

Bushing Straight Reducing Adapters with Hex Body

For Use With: Air, Steam, Oil, Water, Natural Gas
Pressure Class: See table
Pipe Nipples and Pipe: Use Schedule 40 steel
Specifications Met: See table

Pipe Size
(A)	(B)	Pressure Class	Max. Pressure	Max. Steam Pressure	Material	Specifications Met		Each
NPT Male × NPT Female
3 1/2	1	125	175 psi @ 72° F	125 psi @ 350° F	Iron	ASME B16.14	000000000	000000
3 1/2	1 1/4	125	175 psi @ 72° F	125 psi @ 350° F	Iron	ASME B16.14	000000000	00000
3 1/2	1 1/2	125	175 psi @ 72° F	125 psi @ 350° F	Iron	ASME B16.14	000000000	00000
3 1/2	2	125	175 psi @ 72° F	125 psi @ 350° F	Iron	ASME B16.14	000000000	00000
3 1/2	2 1/2	125	175 psi @ 72° F	125 psi @ 350° F	Iron	ASME B16.14	000000000	00000
3 1/2	3	125	175 psi @ 72° F	125 psi @ 350° F	Iron	ASME B16.14	000000000	00000
4	3 1/2	150	150 psi @ 72° F	150 psi @ 350° F	Iron	ASME B16.14	000000000	00000

Straight Reducers

For Use With: Air, Steam, Oil, Water, Natural Gas
Pressure Class: 150
Specifications Met:
NPT: ASME B1.20.1, ASME B16.3, UL Listed
BSPT: DIN EN 10226
Pipe Nipples and Pipe: Use Schedule 40 steel

Pipe Size
(A)	(B)	Max. Pressure	Max. Steam Pressure	Material		Each
NPT Female
3 1/2	2	150 psi @ 72° F	150 psi @ 350° F	Iron	000000000	0000000
3 1/2	3	150 psi @ 72° F	150 psi @ 350° F	Iron	000000000	000000
4	3 1/2	150 psi @ 72° F	150 psi @ 350° F	Iron	000000000	000000

Plugs with Square Drive

For Use With: Air, Steam, Oil, Water, Natural Gas
Presure Class:
Steel: 150
Iron: 125
Pipe Nipples and Pipe: Use Schedule 40 steel

NPT Male
Pipe Size	Plug Construction	Max. Pressure	Max. Steam Pressure	Material		Each
3 1/2	Hollow	175 psi @ 72° F	125 psi @ 350° F	Iron	000000000	0000000

Plugs with External Square Drive

For Use With:
NPT and BSPT: Air, Natural Gas, Oil, Steam, Water
NPTF: Air, Natural Gas, Steam, Water
Pressure Class:
NPT Iron: 125
BSPT Iron: 150
Specifications Met:
See table
Pipe Nipples and Pipe:
NPT and BPST: Use Schedule 40 steel

NPT Male
Pipe Size	Plug Construction	Max. Pressure	Max. Steam Pressure	Material		Each
3 1/2	Hollow	175 psi @ 72° F	125 psi @ 350° F	Iron	000000000	000000

Low-Pressure Steel Threaded Pipe Flanges

Use these flanges for low-pressure applications in noncorrosive environments. Bolt two flanges of the same size together with a gasket (sold separately) to create an access point within a line.

For technical drawings and 3-D models, click on a part number.

Flanges

Front

Raised Surface on Back

For Use With: Air, Natural Gas, Oil, Steam, Water
Pressure Class: 150
Specifications Met:
NPT: ASME B16.5, ASTM A105, MSS SP-25
BSPT: ASTM A105
Fittings: Use Class 125 or 150 iron and steel
Pipe Nipples and Pipe: Use Schedule 40 steel

			Bolt Hole
Pipe Size	Flange OD	For Bolt Dia.	Dia.	No. of	Bolt Circle Dia.	Max. Pressure	Max. Steam Pressure	Material		Each
NPT
3 1/2	8 1/2"	5/8"	3/4"	8	7"	285 psi @ 72° F	230 psi @ 300° F	Steel	000000000	0000000

Low-Pressure Galvanized Iron and Steel Threaded Pipe Fittings

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

For technical drawings and 3-D models, click on a part number.

Bushing Straight Reducing Adapters with Hex Body

For Use With: Air, Steam, Oil, Water, Natural Gas
Pressure Class: See table
Specifications Met: See table
Pipe Nipples and Pipe: Use Schedule 40 galvanized steel
Flanges: Use Class 150 galvanized steel

Pipe Size
(A)	(B)	Pressure Class	Max. Pressure	Max. Steam Pressure	Material	Specifications Met		Each
NPT Male × NPT Female
4	3 1/2	150	150 psi @ 72° F	150 psi @ 350° F	Galvanized Iron	ASME B16.14	00000000	0000000
3 1/2	1	125	125 psi @ 72° F	125 psi @ 350° F	Galvanized Iron	ASME B1.20.1, ASME B16.14, ASTM A126, UL Listed	00000000	000000
3 1/2	1 1/4	125	125 psi @ 72° F	125 psi @ 350° F	Galvanized Iron	ASME B1.20.1, ASME B16.14, ASTM A126, UL Listed	00000000	000000
3 1/2	1 1/2	125	125 psi @ 72° F	125 psi @ 350° F	Galvanized Iron	ASME B1.20.1, ASME B16.14, ASTM A126, UL Listed	00000000	000000
3 1/2	2	125	125 psi @ 72° F	125 psi @ 350° F	Galvanized Iron	ASME B1.20.1, ASME B16.14, ASTM A126, UL Listed	00000000	000000
3 1/2	3	125	125 psi @ 72° F	125 psi @ 350° F	Galvanized Iron	ASME B1.20.1, ASME B16.14, ASTM A126, UL Listed	00000000	000000

Plugs with External Square Drive

For Use With: Air, Steam, Oil, Water, Natural Gas
Pressure Class: See table
Specifications Met:
NPT Steel: SAE J531
NPT Iron: ASME B1.20.1, ASME B16.14, ASTM A126, UL Listed
BSPT: ASTM A197, DIN EN 10226
Pipe Nipples and Pipe: Use Schedule 40 steel
Flanges: Use Class 150 galvanized steel

NPT Male
Pipe Size	Plug Construction	Pressure Class	Max. Pressure	Max. Steam Pressure	Material		Each
3 1/2	Hollow	125	125 psi @ 72° F	125 psi @ 350° F	Galvanized Iron	00000000	0000000

FM-Approved Low-Pressure Cast Iron Unthreaded Pipe Flanges

Front

Flat Surface on Back

For Use With: Air, Diesel Fuel, Gasoline, Natural Gas, Oil, Steam, Water
Pressure Class: 125
Specifications Met: ASME B1.20.1, ASME B16.1, ASTM A126, FM Approved
Pipe Nipples and Pipe: Use Schedule 40 steel
Fittings: Use Class 125 or 150 iron and steel

FM-approved for fire protection applications, these flanges are cast iron, so they're brittle and can be quickly opened by hitting them with a sledge hammer. Bolt them together with a gasket (not included) to create an access point within a low-pressure pipe line. All are cap flanges, which are also known as blind flanges. Use them in noncorrosive environments.

For technical drawings and 3-D models, click on a part number.

			Bolt Hole
Pipe Size	Flange OD	For Bolt Dia.	Dia.	No. of	Bolt Circle Dia.	Max. Pressure	Max. Steam Pressure		Each
3 1/2	8 1/2"	5/8"	3/4"	8	7"	200 psi @ 72° F	165 psi @ 300° F	0000000	0000000

Low-Pressure Brass and Bronze Threaded Pipe Fittings

Use these fittings in low-pressure flow applications. They have good corrosion resistance. Fittings rated for use with drinking water meet NSF/ANSI 61 safety standards.

For technical drawings and 3-D models, click on a part number.

Bushing Straight Reducing Adapters with Hex or Octagon Body

For Use With:
Brass: Air, Drinking Water, Natural Gas, Oil
Bronze: Air, Natural Gas, Oil, Steam, Water
Pressure Class: 125
Specifications Met: See table
Pipe Nipples and Pipe: Use Schedule 40 brass
Flanges: See table

Pipe Size					For Flange
(A)	(B)	Max. Pressure	Material	Hex Width	Class	Material	Specifications Met		Each
NPT Male × NPT Female
3 1/2	3	200 psi @ 72° F	Brass	4 1/4"	150	Brass	ASME B1.20.1, ASME B16.15, NSF/ANSI 61	00000000	0000000
4	3 1/2	200 psi @ 72° F	Brass	4 5/8"	150	Brass	ASME B1.20.1, ASME B16.15, NSF/ANSI 61	00000000	000000

Standard-Wall Plastic Pipe for Water

Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications. It’s made of PVC, which has good corrosion resistance. Pipe meets NSF/ANSI Standard 61 for drinking water. It also meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality. Connect this pipe to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld).

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

For technical drawings and 3-D models, click on a part number.

Rigid Pipe

For Use With: Drinking Water, Water
Maximum Temperature: 140° F
Specifications Met: ASTM D1784, ASTM D1785, NSF/ANSI 61
Fittings: Use Schedule 40 PVC Plastic
Flanges: Use Schedule 40 PVC Plastic

2 ft.
Pipe Size	Schedule	OD	ID	Wall Thick.	Color	Max. Pressure		Each
3 1/2	40	4"	3.548"	0.226"	White	240 psi @ 72° F	000000000	000000
5 ft.
3 1/2	40	4"	3.548"	0.226"	White	240 psi @ 72° F	000000000	00000
10 ft.
3 1/2	40	4"	3.548"	0.226"	White	240 psi @ 72° F	000000000	000000

Pipe Cement for Max. Pipe Size 6

000000000

Each

00000

Clear-View Standard-Wall Plastic Pipe for Water

See inside your line with this clear pipe, which works in a variety of residential and commercial low-pressure plumbing and water supply applications. It connects to standard-wall plastic pipe fittings. Made of PVC, it has good corrosion resistance. Join this pipe to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld).

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

For technical drawings and 3-D models, click on a part number.

Clear Blue Rigid Pipe

For Use With: Drinking Water, Water
Maximum Temperature: 140° F
Specifications Met: ASTM D1784, ASTM D1785, NSF/ANSI 61
Fittings: Use Schedule 40 PVC Plastic
Flanges: Use Schedule 40 PVC Plastic

Rigid pipe meets NSF/ANSI 61 for use with drinking water systems. It also meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality.

2 ft.
Pipe Size	Schedule	OD	ID	Wall Thick.	Max. Pressure		Each
3 1/2	40	4"	3.548"	0.226"	120 psi @ 72° F	000000000	000000
4 ft.
3 1/2	40	4"	3.548"	0.226"	120 psi @ 72° F	000000000	000000
10 ft.
3 1/2	40	4"	3.548"	0.226"	120 psi @ 72° F	000000000	000000

Pipe Cement for Max. Pipe Size 6

000000000

Each

00000

Low-Pressure Clamp-On Connectors for Air

For Use With: Air
Temperature Range:
Neoprene Rubber Gasket: -20° to 190° F
Silicone Rubber Gasket: -100° to 500° F
For Pipe Material: Stainless Steel, Iron, Steel, Aluminum, Copper, PVC Plastic, CPVC Plastic

Tighten the bolts on these connectors to join two pieces of rigid pipe of the same or different materials. They are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems. Connectors have a stainless steel strip that provides an escape route for electrostatic buildup when used in a fully grounded system.

Connectors with sleeve have an inner lining that protects the gasket.

For technical drawings and 3-D models, click on a part number.

Neoprene Rubber Gasket
For Pipe OD	For Pipe Size	Lg.	No. of Bolts	Max. Pressure	Max. Vacuum	Material	Nut Material	Bolt Material		Each
Connectors with 304 Stainless Steel Sleeve
4"	3 1/2	8"	4	15 psi @ 72° F	15 in. of Hg @ 72° F	Galvanized Steel	Zinc-Plated Steel	Zinc-Plated Steel	0000000	000000
Silicone Rubber Gasket
Connectors with 304 Stainless Steel Sleeve
4"	3 1/2	8"	4	15 psi @ 72° F	15 in. of Hg @ 72° F	Galvanized Steel	Zinc-Plated Steel	Zinc-Plated Steel	0000000	00000

Low-Pressure Quick-Lock Clamp-On Connectors for Air

For Use With: Air
Temperature Range: -30° to 180° F
For Pipe Material: Stainless Steel, Iron, Steel, Aluminum, Copper, PVC Plastic, CPVC Plastic

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools. Use connectors to join pieces of rigid pipe of the same or different materials. They are commonly used in gravity-flow systems and low-pressure air and vacuum conveying systems. Connectors have a metal strip that provides an escape route for electrostatic buildup when used in a fully grounded system.

For technical drawings and 3-D models, click on a part number.

For Pipe OD	For Pipe Size	Lg.	Max. Pressure	Max. Vacuum	Material	Gasket Material		Each
4"	3 1/2	4"	15 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	Gum Rubber	0000000	000000

Low-Pressure Pipe Repair Clamps

Partial Gasket Coverage

Repair pinholes and cracks in low-pressure applications without having to disassemble your system. All clamps are 304 stainless steel for very good corrosion resistance. Choose a clamp that’s long enough to cover your damaged area with at least 1” on both sides.

Clamps with partial-coverage gaskets, also known as patch clamps, repair pinholes and small cracks. The gasket on these clamps wraps around as much as 40% of the pipe. Unlike clamps with full-coverage gaskets, you'll need to line up the gasket so it completely covers the damaged area.

Most Buna-N gaskets work with a variety of media, such as air, water, oil, and hydraulic fluid.

EPDM gaskets can be used with steam and other high-temperature applications.

Clamps that meet NSF/ANSI 61 are safe for use with drinking water systems.

Buna-N Rubber Gaskets—Partial Coverage

For Use With: Air, Diesel Fuel, Drinking Water, Hydraulic Fluid, Oil, Water
Temperature Range: -20° to 180° F
Specifications Met: NSF/ANSI 61
For Pipe Material: Aluminum, Copper, Iron, PVC Plastic, Steel

3" Lg.
For Pipe OD	For Pipe Size	Max. Pressure	Max. Vacuum	Material		Each
4"	3 1/2	100 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	000000
6" Lg.
4"	3 1/2	100 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	00000
9" Lg.
4"	3 1/2	100 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	0000000	00000
12" Lg.
4"	3 1/2	100 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	0000000	000000

EPDM Rubber Gaskets—Partial Coverage

For Use With: Air, Drinking Water, Steam, Water
Max. Temperature: 300° F
Specifications Met: NSF/ANSI 61
For Pipe Material: Aluminum, Copper, Iron, PVC Plastic, Steel

3" Lg.
For Pipe OD	For Pipe Size	Max. Pressure	Max. Steam Pressure	Max. Vacuum	Material		Each
4"	3 1/2	100 psi @ 72° F	25 psi @ 300° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	000000
6" Lg.
4"	3 1/2	100 psi @ 72° F	25 psi @ 300° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	00000

Medium-Pressure Pipe Repair Clamps

Full Coverage Gasket

Use these clamps to repair pinholes and cracks in medium-pressure applications. They slip over your pipe, so there's no need to disassemble your system. Choose a clamp that’s long enough to cover your damaged area with at least 1” on both sides.

Clamps with full-coverage gaskets repair larger areas than partial-coverage gaskets, such as nearly full-circle breaks. These clamps are easier to install than clamps with partial-coverage gaskets because you don’t need to line up the gasket with the damaged area.

EPDM gaskets can be used with steam and other high-temperature applications.

304 stainless steel clamps have very good corrosion resistance; they are adjustable to accommodate slight variance of pipe OD due to aging or corrosion build up. They meet NSF/ANSI 61 safety standards for use with drinking water systems.

For technical drawings and 3-D models, click on a part number.

Buna-N Rubber Gaskets—Full Coverage

For Use With: Air, Diesel Fuel, Drinking Water, Hydraulic Fluid, Oil, Water
Temperature Range: -20° to 180° F
Specifications Met: NSF/ANSI 61
For Pipe Material: Stainless Steel, Aluminum, PVC Plastic, Copper

7 1/2" Lg.
For Pipe OD	For Pipe Size	Max. Pressure	Max. Vacuum	Material		Each
3.73" to 4"	3 1/2	250 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	0000000
12 1/2" Lg.
3.73" to 4"	3 1/2	250 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	000000
15" Lg.
3.73" to 4"	3 1/2	250 psi @ 72° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	000000

EPDM Rubber Gaskets—Full Coverage

For Use With: Air, Drinking Water, Steam, Water
Max. Temperature: 300° F
Specifications Met: NSF/ANSI 61
For Pipe Material: Stainless Steel, Aluminum, PVC Plastic, Copper

7 1/2" Lg.
For Pipe OD	For Pipe Size	Max. Pressure	Max. Steam Pressure	Max. Vacuum	Material		Each
3.73" to 4"	3 1/2	250 psi @ 72° F	25 psi @ 300° F	15 in. of Hg @ 72° F	304 Stainless Steel	00000000	0000000

Vacuum Fittings for Steel Tubing

For Use With: Air, Glass, Plastic Pellets, Resins, Wood Chips
Temperature Range: -10° to 180° F
Tubing: Galvanized Steel: Use with steel, galvanized steel
Steel: Use with steel

Use these fittings to create an air vacuum system without the hassle of brazing and welding. Insert two fittings into a clamp (sold separately) and tighten to form a secure seal.

Galvanized steel fittings have fair corrosion resistance. Fittings without a finish should only be used in noncorrosive environments.

For technical drawings and 3-D models, click on a part number.

Straight Adapters, Tube × Male Threaded Pipe

				Galvanized Steel		Steel
For Tube OD	Pipe Size	Max. Pressure	Max. Vacuum		Each		Each
NPT Threads
3 1/2"	3 1/2	15 psi @ 72° F	15 in. of Hg @ 72° F	00000000	000000	0000000	000000

Straight Adapters, Tube × Female Threaded Pipe

				Galvanized Steel		Steel
For Tube OD	Pipe Size	Max. Pressure	Max. Vacuum		Each		Each
NPT Threads
3 1/2"	3 1/2	15 psi @ 72° F	15 in. of Hg @ 72° F	00000000	0000000	0000000	0000000

Metal Round Caps

More durable than plastic caps, these provide the most protection from abrasion and impact.

Steel caps are stronger than aluminum.

Aluminum caps have good corrosion resistance, are lightweight, and are nonmagnetic.

Stainless steel caps have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

			Steel		Aluminum		18-8 Stainless Steel
For OD	For Pipe Size	Inside Ht.		Each		Each		Each
Caps for Unthreaded Pipe
4"	3 1/2	1 1/2"	0000000	00000	0000000	000000	00000000	000000

Tapered Caps

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

For technical drawings and 3-D models, click on a part number.

Caps for Unthreaded Pipe

Flexible Polyethylene Plastic
For OD	For Pipe Size	Inside Ht.	Max. Temp., °F	Color	Pkg. Qty.		Pkg.
3.94"-4.07"	3 1/2	3/4"	150°	Red	25	00000000	000000

Caps for NPT Tapered-Thread Pipe

Flexible Polyethylene Plastic
For OD	For Pipe Size	Inside Ht.	Max. Temp., °F	Color	Pkg. Qty.		Pkg.
3.71"-3.84"	3 1/2	3/4"	150°	Red	25	00000000	000000

Adhesive-Back Flange Caps

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

For technical drawings and 3-D models, click on a part number.

Rigid Plastic
For Pipe Size	For OD	Adhesive Type	Max. Temp., °F	Color	Pkg. Qty.		Pkg.
3 1/2	5 1/2"	Rubber	160°	Black	4	0000000	000000

Hollow Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Use the flange to remove them with ease.

For technical drawings and 3-D models, click on a part number.

Polyethylene Plastic
For Pipe Size	For ID	Ht.	Flange Dia.	Max. Temp., °F	Hardness	Color	Pkg. Qty.		Pkg.
For Unthreaded Pipe
3 1/2	3.47"-3.6"	3/4"	3 7/8"	150°	Durometer 45D	Red	10	0000000	00000
For NPT Tapered-Thread Pipe
3 1/2	3.79"-3.92"	3/4"	4 1/8"	150°	Durometer 45D	Red	25	00000000	00000

Wing Nut Expansion Plugs

Twist the wing nut on these plugs to expand the seal and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.

For Pipe		Max. Back Pressure
Size	ID	Air, psi	Water, ft. of head	O'all Ht.	Temp. Range, °F	Seal Material		Each
Style A
Stainless Steel Plate
3 1/2	3.44"-3.60"	5	12	2 15/16"	0° to 175°	Neoprene Rubber	0000000	000000

Hex-Nut Expansion Plugs

Tighten the nut on these plugs to expand the seal and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.

For Pipe		Max. Back Pressure
Size	ID	Air, psi	Water, ft. of head	O'all Ht.	Temp. Range, °F	Seal Material		Each
Style B
Stainless Steel Plate
3 1/2	3.44"-3.60"	5	12	3 1/16"	-40° to 250°	Neoprene Rubber	0000000	000000

T-Handle Expansion Plugs

Twist the easy-grip t-handle on these plugs to expand the seal and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.

For technical drawings and 3-D models, click on a part number.

For Pipe		Max. Back Pressure					Brass Handle		Stainless Steel Handle
Size	ID	Air, psi	Water, ft. of head	O'all Ht.	Temp. Range, °F	Seal Material		Each		Each
Zinc-Plated Steel Plate
3 1/2	3.44"-3.60"	5	12	3 15/16"	-40° to 250°	Neoprene Rubber	0000000	000000	000000	00
Stainless Steel Plate
3 1/2	3.44"-3.60"	5	12	3 15/16"	-40° to 250°	Neoprene Rubber	000000	00	0000000	000000

Quick-Snap Expansion Plugs

Turn the cam handle to expand the seal, then snap the handle down to hold it in place and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.

For technical drawings and 3-D models, click on a part number.

For Pipe		Max. Back Pressure					Brass Handle		Stainless Steel Handle
Size	ID	Air, psi	Water, ft. of head	O'all Ht.	Temp. Range, °F	Seal Material		Each		Each
Zinc-Plated Steel Plate
3 1/2	3.38"-3.60"	5	12	2 5/16"	-40° to 250°	Neoprene Rubber	0000000	000000	000000	00
Stainless Steel Plate
3 1/2	3.38"-3.60"	5	12	2 5/16"	-40° to 250°	Neoprene Rubber	000000	00	0000000	000000

Cleanout Plugs

Recessed

Raised

Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.

			Brass				Black ABS Plastic
			Recessed		Raised		Recessed
Cleanout Plug OD/Fitting ID	For Pipe Size	Thread Type		Each		Each		Each
3 31/32"	3 1/2	NPT	0000000	000000	0000000	000000	0000000	00000

Driver for Recessed Plugs

000000

Each

000000

Pipeline Fluid Blockers

Also known as pipe blinds, these fluid blockers fit between two flanges to stop flow, so you can work downstream without draining the system.

Paddle blinds slip between the flanges to temporarily block flow.

For technical drawings and 3-D models, click on a part number.

Paddle Blinds

					Handle
For Pipe Size	OD	For Orifice Flange ANSI Class	Max. Pressure	Thick.	Lg.	Wd.	Temp. Range, °F	Specifications Met		Each
Steel
3 1/2	6 1/4"	150	150 psi @ 70° F	3/8"	7"	1"	-20° to 100°	ASTM A36	0000000	0000000

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls. Made of plastic, these grommets are chemical resistant and won't dry out and become brittle when exposed to UV rays. All have a medium-hard rating to withstand high levels of impact. They can be used outdoors.

For technical drawings and 3-D models, click on a part number.

Vinyl Plastic
For Hole Dia. (A)	For OD	For Tube OD	For Pipe Size	For Material Thick. (B)	ID (C)	Flange Dia. (D)	Overall Ht. (E)	Hardness Rating	Hardness	Temp. Range, °F	For Use Outdoors	Color		Each
5 3/4"	4"-4.12"	4 1/8"	3 1/2	0.05"-0.18"	3 3/4"	6 1/4"	1.06"	Medium Hard	Durometer 60A	-40° to 200°	Yes	Black	00000000	000000