Use these corrosion-resistant fittings in a low-pressure pipe line.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Also known as ANSI flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Use these heavy duty forged flanges for high-pressure applications.

Use these fittings for low-pressure applications in noncorrosive environments.

These flanges are for low-pressure applications in noncorrosive environments.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

The galvanized finish on these Pressure Class 150 flanges provides fair corrosion resistance.

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Tap into your line in systems operating up to 1,400 psi to vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Also known as Pressure Class 150 flanges, these brass flanges are designed for low-pressure applications.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Typically used with standard-wall aluminum unthreaded pipe fittings.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Typically used with thin-wall aluminum unthreaded pipe fittings.

Also known as Pressure Class 200 fittings.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Connect to CPVC pipe fittings for use in high-temperature plumbing and water supply applications up to 170° or 200° F.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Also known as Victaulic pipe, this pipe has grooved ends that connect to fittings and flanges with a clamp, so you can access your line for routine maintenance. It is CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

These all-metal expansion joints can handle high temperatures up to 800° F.

These joints are designed for vertical use in drain, waste, and vent systems.

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Metal hose fittings have better durability than plastic barbed hose fittings.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.

Fittings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Slide the barbed end into hose and secure with a clamp.

Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.