These flanges are for low-pressure applications in noncorrosive environments.

Pipe has clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end. When you use a wrench to turn, connections on both ends tighten at the same time.

Use these fittings for low-pressure applications in noncorrosive environments.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

A plastic sleeve prevents destructive corrosion when connecting different metals.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Also known as Class 300 flanges, these medium-pressure flanges have a galvanized finish for fair corrosion resistance.

Also known as Class 1500 steel flanges, these have the strength to handle high pressures.

Combine an adapter with a two-piece pipe flange (sold separately) to build a customized flange connection for noncorrosive environments.

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

Also known as Code 61 SAE hydraulic flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

For excellent strength in extreme-pressure applications, choose these heavy duty Class 1500 flanges.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Use these heavy duty forged flanges for high-pressure applications.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Typically used with thick-wall and high-pressure stainless steel unthreaded pipe fittings.

Typically used with thin-wall stainless steel unthreaded pipe fittings.

Also known as Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Also known as ANSI flanges.

Also known as Code 61 SAE hydraulic flanges, these let you create an access point in a high-pressure hydraulic line.

Typically used with medium- to high-pressure stainless steel threaded pipe fittings.

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Typically used with low-pressure brass and bronze threaded pipe fittings.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Class 125 fittings, they are built for use in low-pressure applications.

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

These brass fittings have the strength to handle high-pressure applications.

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

Use these heavy-duty brass fittings for high-pressure drinking water applications.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

Typically used with medium-pressure brass and bronze threaded pipe fittings.

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Typically used with precision extreme-pressure brass and bronze threaded pipe fittings.

Bolt these flanges to another same-size flange with a gasket to create an access point within a pipe line. They are also known as Silbraze flanges.

Also known as Silbraze fittings.