Pipe Protectors | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Flexibility Flexibility

Flexible

Semi-Rigid

Rigid

	Flange Diameter (D) Flange Diameter (D)

	Length Length

	Mount Type Mount Type

View catalog pages (56)

Forward

How can we improve?

4,403 Products

Caps

Round Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Metal Round Caps

More durable than plastic caps, these provide the most protection from abrasion and impact.

Heavy Duty Round Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Domed Round Caps

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Roll-Resistant Round Caps

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

Sure-Grip Round Caps

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

Tethered Round Caps

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

Hanging Round Caps

Slide these caps over a tool handle or other round object and use the eye to hang it.

Chemical-Resistant Round Caps

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Antistatic Round Caps

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

High-Temperature Round Caps

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

Conductive Round Caps

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Food Industry Round Caps

Made of FDA listed materials, these caps are suitable for food contact.

Tapered Caps

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

High-Temperature Tapered Caps

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Tapered Cap Assortments

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Square Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Heavy Duty Square Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Rectangular Caps

Slide these flexible vinyl caps onto rectangular objects and they conform for a snug fit.

Angle Caps

Place these flexible vinyl caps over the ends of your angle iron and they conform for a snug fit.

Corner Caps

Guard the corners of fragile materials such as glass and mirrors.

Heavy Duty Angle Caps

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Tear-Tab Caps

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

Propane Tank Tear-Tab Caps

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

Threaded Caps

Protect externally threaded components from contaminants during fabrication and storage.

Heat-Shrink Round Caps

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Stretchable Elastic Caps

Similar to a shower cap, these caps have an elastic band that allows them to stretch and cover a variety of shapes in a range of sizes.

Stretchable Sealing Caps

Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.

Squeeze Top Caps

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Flexible Pull-Tab Caps

Slide these flexible vinyl caps on and they conform for a snug fit. Pull the tab for easy removal.

High-Visibility Pull-Tab Caps

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Flange Caps

Adhesive-Back Flange Caps

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Stretchable Flange Caps

Stretch these caps over flared edges such as flanged tubing and valve handles.

Flange Caps

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

SAE Flange Caps

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Rebar Caps

Keep personnel safe from protruding rebar and pipe. Made of rigid plastic, these durable safety caps are bright orange or yellow for excellent visibility.

Fastener Caps

Hinged Fastener Caps

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

Threaded Standoff Caps

Give open-ended standoffs a finished look and protect them from dirt and debris.

Screw Caps

Conceal and protect the tops of socket head or button head screws.

Snap-On Fastener Caps

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Tapered Plugs

Hollow Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Hollow Tapered Plug Assortments

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Miniature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Expandable Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

Pull-Ring Tapered Plugs

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

Tapered Plugs

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

Tamper-Evident Tapered Plugs

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Corks

Lightweight and moisture resistant, these plugs are laboratory-grade 100% natural cork. They’re tapered to fit a range of hole diameters.

Hollow High-Temperature Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

High-Temperature Tapered Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Expandable High-Temperature Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Miniature High-Temperature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Chemical-Resistant Tapered Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Food Industry Tapered Plugs

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Round Plugs

Antistatic Round Plugs

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

Conductive Round Plugs

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

Sealing Plugs

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

Round Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Chemical-Resistant Pull-Through Round Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Miniature Pull-Through Round Plugs

Also known as mouse tails, these tiny plugs fit through-hole IDs as small as 0.022”, 0.025", or 0.03”.

Flanged Pull-Through Round Plugs

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

High-Temperature Pull-Through Round Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Snap-In Round Plugs

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

Threaded Round Plugs for NPT Pipe

Protect internally threaded NPT connections from contaminants during fabrication and storage.

High-Temperature Round Plugs for NPT Pipe

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Threaded Round Plugs for BSPT Pipe

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Threaded Round Plugs for Straight-Thread Pipe

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Threaded Round Plugs for 37° Flared Tube

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

Pull-Tab Round Plugs

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Rectangular Plugs

Snap-In Rectangular Plugs

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Push-In Rectangular Plugs

Push these plugs into an opening and friction holds them in place.

Square Plugs

Domed Square Plugs

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Metal Square Plugs

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Snap-In Square Plugs

Flexible ridges or straps hold these plugs in place.

Push-In Square Plugs

Push these plugs into an opening and friction holds them in place.

Panel Plugs

Sealing Panel Plugs

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Plastic Snap-In Panel Plugs

Tapered prongs or a snap-in ring securely hold these plugs in place.

Vented Locking Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. All of these plugs have wings that expand against the sides of the hole to lock them in place.

Metal Snap-In Panel Plugs

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Metal Snap-In Panel Plug Assortments

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Vented Snap-In Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

Locking Panel Plugs

The wings on these plugs expand against the sides of a hole to lock them in place.

Clear Locking Panel Plugs

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

Hydraulic Sealing Plugs

Permanently seal unthreaded holes in pneumatic and hydraulic components.

Pipe and Tubing Grommets

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls.

Push-In Pipe and Tubing Grommets

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Grommets

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Grommet Assortments

Keep grommets of various sizes on hand to solve whatever problems arise.

Cut-to-Size Grommets

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Expandable Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

High-Temperature Grommets

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Split Grommets

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Expandable Locking Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

Locking Grommets

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Sealing Grommets

Split Sealing Grommets

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Create-Your-Own Split Sealing Grommets

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Sealing Grommets

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Sanitary Sealing Grommets

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Shrink-to-Fit Sealing Grommets

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Liquid-Tight Sealing Grommets

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Shaft Grommets

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

Fabric Grommets

Reinforcing Fabric Grommets

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Rolled-Rim Reinforcing Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommet Kits

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Snap-In Fabric Grommets

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Self-Piercing Fabric Grommets

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Expandable Furniture Grommets

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Flexible Furniture Grommets

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Pipe and Tubing Guards

Safeguard pipe, tubing, and other round equipment from damage. Black and yellow stripes create a visual alert to draw attention to equipment and obstructions.

Bumpers for Tubing and Rods

Wraparound Bumpers for Tubing and Rods

For quick and easy installation, wrap these bumpers around tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. They're also good for providing protection during shipment and storage.

Bumpers for Tubing and Rods

With a split design, you can easily place these bumpers on tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. Use the concealed screw to secure them in place.

Pipe Insulation

ADA-Compliant Hot Water Pipe Cover Kits

These kits insulate one P-trap and two stop valves to reduce the risk of burns from accidental contact with hot pipes under your sink. The molded, flexible pipe covers are ADA compliant when properly installed.

ADA-Compliant Hot Water Pipe Covers

Reduce the risk of burns from accidental contact with hot pipes under your sink. These molded, flexible pipe covers are ADA compliant when properly installed.

Tear-Resistant Silicone Foam Pipe Insulation

Even at high temperatures, these tubes remain flexible to stretch over components without tearing. They restrict absorption of water, air, and gas and are typically used on hot and cold water lines and electrical components.

High-Temperature Ceramic Fiber Pipe Insulation

Shield against extreme heat with these flexible ceramic strips. They are often used to insulate hose, cables, and process piping.

Flexible Rubber Foam Pipe Insulation

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.

Lightweight Melamine Foam Pipe Insulation

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems.

Ultra-Thin Aerogel Pipe Insulation

Lightweight and super thin, these fiber-reinforced silica aerogel sheets and strips flex into tight spaces other insulation can't. Use on process piping and in power-generating applications.

Economical Flexible Polyethylene Foam Pipe Insulation

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications

Fiberglass Pipe Insulation

This common insulation material is typically used on hot and cold water lines and in process piping.

Quick-Install Fiberglass Pipe Insulation

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.

High-Strength Basalt Pipe Insulation

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

Chemical-Resistant Cellular Glass Pipe Insulation

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines.

Clean Room Melamine Foam Pipe Insulation

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

Mineral Wool Pipe Insulation

Rigid and flame resistant, these insulation tubes are typically used in process piping and mechanical systems.

Ultra-Thin Low-Temperature Aerogel Pipe Insulation

Able to withstand temperatures as low as -290° F, these super-thin, lightweight sheets are made of fiber-reinforced silica aerogel that can flex into tight spaces other insulation can't. Use in process piping and power-generating applications.

Ultra-Insulating Low-Temperature
Polyisocyanurate Foam Pipe Insulation

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.

Pipe Insulation Banding

Save installation time with banding that’s ready to use. It has an easy-to-close fastener on one end.

Metal Pipe Insulation Jacketing

Guard insulation from heavy impact and chemical exposure. This metal jacketing is corrosion resistant and often used outdoors.

Plastic Pipe Insulation Jacketing

Protect insulation from light impact and moisture with this durable PVC jacketing.

Pipe Condensation-Reducing Rubber Strips

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.

Pipe Insulation Coatings

An alternative to jacketing, these coatings create a vapor barrier and protect from conditions outdoors. They are often used on irregularly shaped surfaces, such as fittings, flanges, and valves.

Pipe Condensation-Reducing Coatings

Prevent condensation from forming on refrigeration and air conditioning lines and cold‐water piping.

Pipe Insulation Repair Strips

Protect and repair insulation with this cotton fiber and resin mesh.

Building Insulation

Void-Filling Spray Foam Insulation

Cover large areas with this two-part expanding foam insulation.

Flame-Retardant Void-Filling Spray Foam Insulation

This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas.

Spray Foam Insulation

Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour.

Quick-Cure Spray Foam Insulation

Expanding quickly to fill large voids, this foam insulation begins to harden in 4 minutes and can be cut within 10 minutes.

Insulation Hanger Studs

Attach these hanger studs to a flat surface, then press your insulation sheets onto the spikes and secure with a washer.

Insulation Fill

Small puffs of loose-fill insulation can be packed as densely as you choose. Pour or blow it into walls and ceilings, or mix it into insulating cements as a filler.

Insulation for Equipment, Ovens, and Furnaces

Abrasion-Resistant Rigid Calcium
Silicate Insulation Sheets

Made of high-strength calcium silicate, these durable sheets withstand high temperatures and are often used in power-generating applications.

Thermal-Shock-Resistant Ceramic
Fiber Insulation Sheets for Furnaces

Designed for fluctuating, high-temperature applications, these semi-rigid sheets are typically used in furnaces and fire protection applications. They experience very little shrinkage at high temperatures, but the brittle material can be somewhat difficult to work with.

Abrasion-Resistant Firebrick Insulation

Stronger than standard firebricks but with lower insulation capabilities, these withstand heavy abrasion on the floors and sides of furnaces. Also known as hard firebricks.

Moldable Ceramic Insulation Sheets for Furnaces

Wet these rigid sheets and they become formable. They can be molded multiple times until exposed to heat, which causes them to become rigid again.

Firebrick Repair Coatings

Renew heat resistance and performance of worn firebrick. Apply coating with a brush or spray on for a crack-free seal.

Crack-Resistant Rigid Polyimide Insulation Sheets

Even when subjected to heavy compression, these rigid polyimide sheets won't crack.

Extreme-Temperature Cement

Set and repair cast iron and steel furnaces, heaters, stoves, and boilers with this ready-to-use cement. It experiences minimal shrinkage for a permanent smokeproof and gasproof joint. Apply with a trowel or a spatula.

Ultra-Thin Rigid Millboard
Insulation Sheets for Furnaces

Thinner than most rigid insulation for furnaces and other high-heat applications, these millboard sheets are also used for gasket fabrication.

Ceramic Fiber Insulation Sheets for Furnaces

The most common of our flexible high-temperature sheets, these are used to insulate furnaces.

Rigid Mineral Wool Insulation Sheets

These durable sheets resist compression and are often used in oven and power-generating applications.

Rigid Silica Ultra-Insulation Sheets for Furnaces

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

Firebrick Insulation

Often used in furnaces, these firebricks have been machined for a snug fit to minimize heat loss.

Firebrick Bonding Mortar

Lay, coat, and bond firebricks. Apply this mortar with a trowel.

Rigid Fiberglass Duct Insulation Sheets

Insulate rectangular ductwork.

Heat Barriers

Heat Barrier Gel

Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.

Heat Barrier Putty

Form this reusable putty around metal pipes and tubing or spread on a flat metal surface to stop heat from traveling to adjoining surfaces when soldering, welding, and brazing.

Heat Barrier Sheets

Protect equipment and surfaces from radiant heat. These flexible sheets have an adhesive back for installation.

Insulation for Freezers

Low-Temperature Rigid Cork Insulation Sheets

Use these sheets in operating temperatures below 32° F, such as cold-storage applications.

Moisture-Resistant Low-Temperature
Rigid Polystyrene Foam Insulation Sheets

These sheets resist the absorption of water, air, and gas and are widely used in cold-storage and packaging applications.

Impact-Resistant Low-Temperature
Rigid PVC Foam Insulation Sheets

Made of rugged PVC foam, these rigid sheets absorb impact and restrict the absorption of water, air, and gas. Use in applications with operating temperatures below 32° F.

Cable Ramps

Light Duty Drop-Over Interlocking Cable Ramps

Use in areas with light pedestrian traffic.

Bendable Drop-Over Interlocking Cable Ramps

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Drop-Over Interlocking Cable Ramps

These cable ramps handle heavy pedestrian and equipment traffic.

Lay-In Interlocking Cable Ramps

Lay your cable in the slit on the top so it stays off the floor.

Multichannel Interlocking Cable Ramps

Multiple channels let you separate different types of cable and cords.

Cable Ramps

Protect cable from carts, pedestrians, and other light indoor traffic.

Drive-Over Cable Ramps

These cable ramps are strong enough to withstand equipment traffic.

Wide-Span Cable Ramps

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Cable Protection Tape

Reduce tripping hazards when running cable and cords through a pedestrian area.

Protective Equipment

Guardrails

Low-Profile Guardrails

These guardrails sit low to the ground to protect racks and equipment without restricting access.

Bounce-Back Guardrails

During light collisions, these guardrails tilt to absorb impact and minimize damage to a vehicle.

Column Guards

A two-piece design lets you wrap these guards around a column.

Bollard Covers

Slip these covers over any bollard.

Fire-Stop Pipe Wrap Strips

Tuck these wraparound strips into the gaps around pipes passing through fire-resistant walls and floors.

Mesh Sleeves

Corrosion-Inhibiting Mesh Sleeves

These sleeves contain a corrosion inhibitor to shield metal parts from corrosion.

Mesh Sleeves

Shield shafts and threaded parts from abrasion and chipping.

Rack Upright Post Protectors

Protect rack posts from damage caused by vehicles.

Ultra-Flexible Adhesive-Mount Heaters for Tanks

Also known as foil heaters, these bend around corners and edges without causing damage to the heating element.

Roof and Gutter Heat Cable

Before ice begins to form, install this constant-wattage heat cable on roofs and in gutters and downspouts to prevent damage caused by ice buildup.

Repair and Reinforcing Tape

Water-Activated Fiberglass Repair Tape

When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.

Dissolvable Repair Tape for Pipes

Create dams in pipes before welding, then wash away with water or steam.

Heaters for Pipes and Tubes

Ready-to-Use Self-Regulating
Heaters for Pipes and Tubes

There’s no need for power-connection kits with these finished lengths of cable.

Constant-Wattage Heaters for Pipes and Tubes

These heaters require a separate temperature switch or controller to regulate heat output.

Ultra-High Temperature Heaters for Pipes and Tubes

For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.

High-Temperature Heaters for Pipes and Tubes

Rated for a maximum heat output of 900° F, these heaters are often used for thawing frozen pipes and rapid spot heating.

Ultra-Flexible Constant-Wattage
Heaters for Pipes and Tubes

Wrap the flexible fiber heating element around small-diameter pipes and tubes or pack it into tight spaces.

Self-Regulating Heaters for Pipes and Tubes

These heaters require a power-connection kit.

Constant-Wattage Heaters with
Temperature Control for Pipes and Tubes

The thermostat automatically turns these heaters on when the temperature drops below 38° F and turns them off when the temperature reaches 45° F.

Constant-Wattage Heaters with Adjustable
Temperature Control for Pipes and Tubes

Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.