Designed to keep the piston from slamming against the cylinder body, these cylinders have adjustable air cushions at each end to minimize wear and noise. Turn the screws to adjust the amount of cushion.

Cylinders are universal mount, so they have threads on both ends to mount in a fixed position or you can use the hole on the back end to pivot mount.

For technical drawings and 3-D models, click on a part number.

Find the best fit for equipment with metric threads. Cylinders are universal mount, so they have threads on both ends to mount in a fixed position or you can use the hole on the back end to pivot mount.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect. They have an NFPA (National Fluid Power Association) industry-standard footprint for easy interchangeability. They’re cushioned to absorb piston impact to minimize wear and noise—cylinders have a screw at each port so you can adjust the amount of cushion. All have a magnetic piston so you can use them with sensors (sold separately) to activate relays and controllers.

For technical drawings and 3-D models, click on a part number.

Ensure the correct cushioning, even with changing loads. These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed. They have an extruded-aluminum body so there's no open spaces for debris to collect. All have a magnetic piston so you can use them with sensors (sold separately) to activate relays and controllers.

For technical drawings and 3-D models, click on a part number.