Mount Type Mount Type |
---|
![]() | ![]() |
Adhesive | Press Fit |
![]() | ![]() |
Screw | Threaded Stud |
Profile Profile |
---|
![]() | Flat |
![]() | Corner |
![]() | Half Round |
![]() | U |
Flexibility Flexibility |
---|
![]() | ![]() |
Very Flexible | Flexible |
Hardness Rating Hardness Rating |
---|
|
Base Material Base Material |
---|
|
More
With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant. All of this trim has a hard rating to withstand high levels of impact. It's also nonmarking.
Very flexible trim can be bent around tight corners.
Adhesive-back trim allows for easy installation. Made of UHMW and PEEK, it has good wear resistance.
For technical drawings and 3-D models, click on a part number.
Outside | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Length, ft. | Each | |
PEEK Plastic | ||||||||||
1" | 0.007" | Very Flexible | Hard | -40° to 300° | No | Yes | Beige | 9 | 0000000 | 000000 |
2" | 0.007" | Very Flexible | Hard | -40° to 300° | No | Yes | Beige | 1 | 0000000 | 0000 |
UHMW Plastic | ||||||||||
1/2" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 15 | 0000000 | 0000 |
1" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 15 | 0000000 | 00000 |
2" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 15 | 0000000 | 00000 |
6" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 3 | 0000000 | 00000 |
12" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 3 | 0000000 | 00000 |
This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. Made of PTFE, it has a slippery surface to minimize friction between parts and is often used on conveyor rails, chutes, and guides. It's also chemical resistant. This trim has a hard or medium-hard rating to withstand high levels of impact. The harder the trim, the more impact it withstands. All of the trim is nonmarking.
Very flexible trim can be bent around tight corners.
Adhesive-back trim allows for easy installation. It is not for use outdoors.
For technical drawings and 3-D models, click on a part number.
Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Length, ft. | Each | ||
PTFE Plastic | |||||||||||
7 | 1/2" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
7 | 1" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
7 | 1 1/2" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
7 | 2" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.
Flexible trim can be bent along a gradual curve. Very flexible trim is flexible enough to bend around tight corners.
Trim with a hard or medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Adhesive-back trim allows for easy installation.
For technical drawings and 3-D models, click on a part number.
Outside | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Inside Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | Per Ft. | |
Vinyl Plastic | ||||||||||||
8 | __ | 1" | 1/8" | Flexible | Hard | -20° to 150° | Yes | No | Black | 0000000 | 00000 | |
10 | __ | 5/16" | 3/16" | Very Flexible | Hard | -20° to 150° | Yes | Yes | Black | 0000000 | 0000 | |
10 | __ | 7/16" | 7/32" | Very Flexible | Hard | -20° to 150° | Yes | Yes | Black | 0000000 | 0000 | |
11 | __ | 31/32" | 1/4" | Very Flexible | Hard | -20° to 150° | Yes | No | Black | 0000000 | 0000 | |
13 | 3/64" | 9/16" | 1/4" | Flexible | Hard | -20° to 150° | Yes | No | Black | 0000000 | 0000 | |
14 | 3/16" | 9/16" | 5/16" | Flexible | Hard | -20° to 150° | Yes | Yes | Black | 0000000 | 0000 | |
14 | 3/16" | 1 1/16" | 9/32" | Flexible | Hard | -20° to 150° | Yes | Yes | Black | 0000000 | 0000 | |
Each | ||||||||||||
Polypropylene Plastic | ||||||||||||
9 | __ | 1" | 1/4" | Very Flexible | Hard | Not Rated | No | Yes | Black | 6 | 0000000 | 00000 |
Commonly used in offices, hospitals, and schools, these guards protect corners on walls and other surfaces from impact. All have a hard rating to withstand high levels of impact.
Polycarbonate and PETG guards are nonmarking.
Adhesive-back guards allow for easy installation. Style 1-3 are available in different colors to match your facility. Use a color selector pack (sold separately) if you’re unsure of what color to choose.
Style 4 adjusts from 45° to 135° to conform to irregular corners.
Color | Clear | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Nonmarking | For Use Outdoors | Hardness Rating | Temp. Range, °F | Choose a Color | 4 ft. | 8 ft. | Color | 4 ft. | 8 ft. | ||
Style 1—90° Angle | |||||||||||||
Polycarbonate Plastic—Adhesive Back | |||||||||||||
3/4" | 3/64" | Yes | No | Hard | Not Rated | 0000000 | Clear | 0000000 | |||||
1 1/8" | 1/16" | Yes | No | Hard | Not Rated | 0000000 | Clear | 0000000 | |||||
2 1/2" | 3/32" | Yes | No | Hard | Not Rated | 0000000 | Clear | 0000000 | |||||
Vinyl Plastic—Adhesive Back | |||||||||||||
1 1/8" | 5/64" | No | No | Hard | 60° to 120° | 0000000 | __ | 000000 | |||||
2 1/2" | 5/64" | No | No | Hard | 60° to 120° | 0000000 | __ | 000000 | |||||
Style 2—90° Angle | |||||||||||||
Polycarbonate Plastic—Adhesive Back | |||||||||||||
2 1/2" | 3/32" | Yes | No | Hard | Not Rated | 0000000 | Clear | 0000000 | |||||
Style 3—135° Angle | |||||||||||||
Polycarbonate Plastic—Adhesive Back | |||||||||||||
2 1/2" | 3/32" | Yes | No | Hard | Not Rated | 0000000 | Clear | 0000000 | |||||
Style 4—45°-135° Angle | |||||||||||||
PETG Plastic—Adhesive Back | |||||||||||||
1" | 3/64" | Yes | No | Hard | Not Rated | __ | 000000 | Clear | 0000000 |
Polycarbonate Plastic Color Selector Packs | 000000 | Each | 00000 |
Beige Vinyl Plastic End Caps 1 1/8" | 00000000 | Each | 0000 |
Vinyl Plastic Color Selector Packs | 0000000 | Each | 000 |
Beige Vinyl Plastic End Caps 2 1/2" | 00000000 | Each | 0000 |
Black Vinyl Plastic End Caps 1 1/8" | 00000000 | Each | 0000 |
Black Vinyl Plastic End Caps 2 1/2" | 00000000 | Each | 0000 |
In addition to protecting the bottom of a wall from damage, these bases create a finished look where the wall meets the floor. They're commonly used in offices, hospitals, and schools. All of these bases have a hard rating to withstand high levels of impact. They are flexible so they can bend along a gradual curve. They're also nonmarking. These bases are available in different colors to match your facility. Use a color selector pack (sold separately) if you’re unsure of what color to choose.
Adhesive-back bases allow for easy installation.
For technical drawings and 3-D models, click on a part number.
Wd. | Lg. | Thick. | Nonmarking | For Use Outdoors | Flexibility | Hardness Rating | Hardness | Temperature Range, °F | Choose a Color | Each | |
Vinyl Plastic | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Straight—Adhesive Back | |||||||||||
4" | 20ft. | 1/16" | Yes | No | Flexible | Hard | Durometer 90A | 50° to 80° | 000000 | 000000 |
Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.
Bumpers with a medium-hard rating withstand higher levels of impact than softer bumpers.
Plastic bumpers are chemical resistant and won't dry out and become brittle when exposed to UV rays. They're also nonmarking. They are not for use outdoors.
OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Choose a Color | Pkg. Qty. | Pkg. | |
Vinyl Plastic | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/2" | 1/16" | 50° to 100° | No | Medium Hard | Durometer 60A | Yes | 50 | 0000000 | 00000 | |
1/2" | 9/64" | 50° to 100° | No | Medium Hard | Durometer 60A | Yes | 50 | 0000000 | 0000 | |
41/64" | 13/32" | 50° to 100° | No | Medium Hard | Durometer 60A | Yes | Black | 76 | 0000000 | 00000 |
OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Vinyl Plastic | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
21/32" | 21/64" | 50° to 100° | No | Medium Hard | Durometer 60A | Yes | Black | 64 | 0000000 | 000000 |
Lg. | Wd. | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Vinyl Plastic | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1/2" | 1/2" | 13/64" | 50° to 100° | No | Medium Hard | Durometer 60A | Yes | Black | 100 | 0000000 | 000000 |
Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers. All are nonmarking.
Bumpers with a medium rating offer a balance of cushioning and impact resistance.
Plastic bumpers are chemical resistant and won't dry out and become brittle when exposed to UV rays. They can be used outdoors.
For technical drawings and 3-D models, click on a part number.
OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Vinyl Plastic | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1/2" | 1/16" | 15 | 10° to 90° | Yes | Medium | Durometer 55A | Yes | Blue | 50 | 000000 | 000000 |
1/2" | 1/8" | 15 | 10° to 90° | Yes | Medium | Durometer 55A | Yes | Blue | 50 | 000000 | 00000 |
3/4" | 1/4" | 15 | 10° to 90° | Yes | Medium | Durometer 55A | Yes | Blue | 10 | 0000000 | 00000 |
1" | 1/4" | 15 | 10° to 90° | Yes | Medium | Durometer 55A | Yes | Blue | 10 | 0000000 | 00000 |
Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.
Felt bumpers protect surfaces from scuffs.
Plastic bumpers are chemical resistant and won't dry out and become brittle when exposed to UV rays.
Rubber bumpers are abrasion resistant.
Polyurethane bumpers have better abrasion resistance than rubber bumpers.
Number of Pieces | Color | Container Type | Includes | Each | |
93 | Black, White | Plastic Case | 1" Round Black Rubber Bumpers with Push-In Stem (5 ea.) 1/2" Round Adhesive-Back Black Felt Bumpers (50 ea.) 1/2" Round Adhesive-Back White Plastic Bumpers (4 ea.) 13/16" Round Black Rubber Bumpers with Unthreaded Hole (4 ea.) 13/16" Tapered Square Adhesive-Back Black Polyurethane Rubber Bumpers (12 ea.) 3/4" Round Black Rubber Bumpers with Unthreaded Hole (4 ea.) 7/16" Domed Black Rubber Bumpers with 6-32 Threaded Stud (4 ea.) 9/16" Round Black Rubber Bumpers with Push-In Stem (10 ea.) | 000000 | 000000 |
Designed to mount at the point of contact between a door handle and the wall, these stops prevent handles from damaging walls when doors swing open. All are nonmarking.
Concave stops are best for preventing damage to button-locking door knobs and handles.
Adhesive-back stops allow for easy installation.
Plastic stops are chemical resistant and won't dry out and become brittle when exposed to UV rays.
For technical drawings and 3-D models, click on a part number.
These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle. Also known as glides, stick these feet under furniture and equipment to slide easily across surfaces to protect floors from scratches and wear.
Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments. Also known as glides, stick these feet under furniture and equipment to slide easily across surfaces to protect floors from scratches and wear.
Also known as glides, stick these feet under furniture and equipment to protect floors from scratches and wear.
For technical drawings and 3-D models, click on a part number.