These tags have a large hole for easy hanging.

Label devices, machines, and other equipment around your food processing plant while reducing the risk of contaminating the food.

Made of polypropylene, these water- and chemical-resistant tags have perforated green, yellow, and red sections that can be quickly torn off to show when the status of an item or project changes. Write on them with a permanent marker.

Made of Tyvek, these tags withstand mild acids and alkalies. Write on them with a permanent marker.

Hang these tags from a vehicle's rearview mirror.

Tags are laminated in plastic so they hold up outdoors.

Communicate dangers to workers near equipment that could cause injury.

Keep tags clean and protected.

These plates have a smudge proof surface that you can write on with permanent marker.

Plastic plates withstand mild acids and are more corrosion resistant than metal plates.

Includes six colors of label tape, each with its own dispenser with serrated edge for cutting.

Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.

This label tape can withstand temperatures up to 240° F and is autoclavable, so you can use it to identify equipment that needs to be sterilized.

The adhesive on these labels withstands temperatures from -320° to 300° F. Stick them to plastic, glass, and metal surfaces.

Cut these labels to the desired length.

Use a permanent marker to write your message.

Use a permanent marker to label the contents of a pipe. They are reflective so they improve visibility in low-light conditions.

Use a permanent marker to label the contents of a pipe. These markers coil around pipes so they stay in place without adhesive.

These labels are cleaned and double-bagged in an ISO Class 4 (Fed. Std. Class 10) clean room. Use them with a thermal-transfer printer for smudeproof results, or write on them using clean room pens.

These labels cannot be removed without visible evidence of tampering—they rip and leave residue when peeled.

Write your information on these labels and then seal the laminating flap to protect your message from weather and tampering.

The messages on these labels clearly display the status of materials. Write additional information in the spaces provided with a permanent marker.

Plastic signs can be used outdoors.

Mount these signs perpendicular to the wall to view the same message on each side.

Write a message in the blank space below the header using a permanent marker or adhesive-back characters.

Visually identify a slow-moving vehicle.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

More sustainable than standard UHMW, these sheets and bars are made from partially recycled material, so they have a lower carbon footprint.

This material suppresses static charges to prevent dust from building up.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Prolonged outdoor exposure won’t discolor or degrade VHMW.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

The addition of glass fibers makes this material more abrasion resistant than standard UHMW. It’s also known as Tivar 88.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This material prevents the buildup of static charges.

A silicone additive gives this material a self-lubricating surface that reduces friction and extends the life of your parts.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments.

Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

Often used for packaging and construction applications, this film is also known as Visqueen.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.

Polyester resists swelling in wet environments.

These black polyester rods protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into valves, pump components, and spacers.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.

A layer of tin-plated steel adds structural support and makes this PTFE easy to form.

Use these Torlon 4203 rods instead of standard Torlon PAI to create parts that not only withstand extreme temperatures, but also are electrical insulators.

Kapton® polyimide film is an excellent electrical insulator.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

Use PFA in place of PTFE and FEP for durability in repetitive processes, such as pump parts. It is chemical resistant across a wide temperature range.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Stronger and more rigid than Torlon 4301 and 4203 because they’re filled with glass, these Torlon 5030 rods are also electrical insulators like Torlon 4203.

These PEEK sheets can be machined to tight tolerances for use in electrical and semiconductor parts, such as test sockets.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

Carbon enhances the stiffness of this material, while the addition of PTFE ensures a slippery surface.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.