Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments.

More sustainable than standard UHMW, these sheets and bars are made from partially recycled material, so they have a lower carbon footprint.

Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.

Made with carbon black, these recycled UHMW sheets are a sustainable alternative to standard UHMW sheets in applications where static electricity is a concern, such as in conveying equipment and chute liners.

This oil-filled material is self-lubricating for an extra-slippery surface.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

This material prevents the buildup of static charges.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

This blended material quickly diverts damaging static charges.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

With glass reinforcement, this nylon 6/6 material is stronger than standard nylon, plus it can withstand higher temperatures. It’s widely used in high-stress applications, such as caster wheels and automotive parts.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

These PEEK sheets can be machined to tight tolerances for use in electrical and semiconductor parts, such as test sockets.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Enhanced UV resistance makes this polycarbonate better than standard polycarbonate for outdoor use.

Often used in security doors and windows to protect against forced entry, this laminated polycarbonate is nearly impenetrable.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

PETG can be formed into complex shapes without sacrificing durability.

Mirrored polycarbonate resists damage caused by impact.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

Graphite is added to this Garolite CE to provide a slippery surface that reduces friction and makes this material conductive.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

A combination of high impact strength and extreme hardness makes Garolite E-glass very difficult to penetrate. It is often used for machine guards.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

Originally designed for the automotive and aerospace industries, these PAEK and carbon fiber sheets are a substitute for metal because they’re as light as aluminum and as strong as a nickel alloy.

Known for its use in the aerospace industry, where a balance of weight and strength is critical, carbon fiber is now often machined into panels for structural framing, machinery components, and robotics.

Layers of fibers alternating in four directions makes this carbon fiber stiff at the corners and edges, so it stands up to twisting forces.

Often used to build frames and structures, these lightweight sheets combine the strength and stiffness of carbon fiber with the impact resistance of Kevlar.

Also known as fishpaper.

Kevlar is a super-tough material that stands up to wear and abrasion.