Plastic Cement | McMaster-Carr

Clear All

	For Use On For Use On

	For Joining For Joining

	Container Type Container Type


Brush-Top Can	Can

Pail	Tube

Cartridge	Jug

Brush-Top Bottle	Bottle

Mixer Cup	Jar

Pen

	Color Color

	Clear		Gray
	Purple		Beige
	Yellow		Black
	Orange		White
	Brown		Amber
	Light Yellow		Aluminum

	Type Type

	Consistency Consistency

	Adhesive Type Adhesive Type

	For Maximum Pipe Diameter For Maximum Pipe Diameter

12"

24"

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Container Size Container Size

	Reaches Full Strength Reaches Full Strength

	Mixing Required Mixing Required

Yes

	Begins to Harden Begins to Harden

	Manufacturer Model Number Manufacturer Model Number

3
4
4SC
16
20
25
40
42
826
1099
1357
2262
4052
4475
4693
4707
4807
10610
10620
10710
10720
19770
EA 445
EA 9131
1000NF

	Manufacturer Manufacturer

	Formulation Formulation

	Cure Type Cure Type

Room Temperature

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Viscosity Viscosity

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Material Material

Plastic

View catalog pages (14)

Forward

How can we improve?

87 Products

About Structural Adhesives

Pipe Cement for Plastic Pipe

Create strong, leakproof joints between unthreaded pipe and fittings. Cleaner and primer (sold separately) are recommended to prepare pipe for adhesion.

Cement for CPVC plastic and for PVC plastic meets NSF/ANSI 61 safety standards for use on drinking water systems. It is also suitable for drain, waste, and vent pipes.

Cement for ABS plastic is for use in drain, waste, and vent systems.

Cement for ABS, PVC, and CPVC plastic works on most plastic pipe, conduit, water lines, and drain, waste, and vent systems.

For CPVC Plastic
For Max. Pipe Dia.	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range, °F	Color	Specifications Met		8 oz.	16 oz.	32 oz.
2"	60 sec.	12 hrs.	Thin Liquid	500	40° to 110°	Yellow	ASTM F493, NSF/ANSI 61	00000000	000000	00	000000
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Orange	ASTM F493, NSF/ANSI 61	00000000	00000	000000	00000
For PVC Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Clear	ASTM D2564, NSF/ANSI 61	00000000	0000	00000	00000
12"	60 sec.	24 hrs.	Thick Liquid	1,600	40° to 110°	Clear	ASTM D2564, NSF/ANSI 61	00000000	00000	00000	00000
12"	60 sec.	24 hrs.	Thick Liquid	1,600	40° to 110°	Gray	ASTM D2564, NSF/ANSI 61	00000000	00000	00000	00000
For ABS Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Black	ASTM D2235	00000000	0000	00000	00000
For ABS, PVC, and CPVC Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Clear	__	00000000	00000	00000	00000

Cleaners and Primers for Pipe Cement

Cleaners
Color		8 oz.	16 oz.	32 oz.
Clear	00000000	00000	000000	000000
Primers
Clear	00000000	0000	00000	00000
Purple	00000000	0000	00000	00000

Pipe Cement for Corrosive Waste Plastic Pipe

Because this cement won't break down when exposed to corrosive waste, it's often used on plastic pipe fittings in laboratories.

Pipe Dia.
Min.	Max.	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range, °F	Color	Specifications Met	For Use On		Each
16 oz.
1 1/2"	24"	60 min.	2 hrs.	Thick Liquid	1,600	40° to 110°	Yellow	ASTM F2618, ASTM F493, NSF/ANSI 14	CPVC Plastic	0000000	000000
32 oz.
1 1/2"	24"	60 min.	2 hrs.	Thick Liquid	1,600	40° to 110°	Yellow	ASTM F2618, ASTM F493, NSF/ANSI 14	CPVC Plastic	0000000	000000

Nonwhitening Cement for Acrylic

When appearance is important, this cement dries clear and forms strong bonds on acrylic.

Cement that cannot be sold to the regions listed exceeds local regulatory limits on VOCs (volatile organic compounds).

Cement
	Container													Dispensing Guns		Mixer Nozzles
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Mix Ratio	Consistency	Viscosity	Temp. Range	Color	For Joining	Cannot Be Sold To		Each		Each		Each
SciGrip Cement
4	4 oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	000000	000000	000000	00	000000	00
4	16 oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	000000	00000	000000	00	000000	00
4SC	4 oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	000000	00000	000000	00	000000	00
4SC	16 oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	000000	00000	000000	00	000000	00
4SC	1 gal.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	00000000	000000	000000	00	000000	00
40	16 oz.	Can	20 min.	7 days	20:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	000000	00000	000000	00	000000	00
40	1 gal.	Can	20 min.	7 days	20:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	00000000	000000	000000	00	000000	00
42	1.69 oz.	Cartridge	15 min.	7 days	10:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	00000000	00000	0000000	000000	000000000	00000
42	7.8 oz.	Cartridge	15 min.	7 days	10:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	00000000	00000	0000000	000000	000000000	0000

Cement for Plastic

Form strong bonds on most plastics.

Cement that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range	Color	For Joining	Cannot Be Sold To		Each
SciGrip Cement
16	1.5 oz.	Tube	5 min.	21 days	Thin Liquid	800	Not Rated	Clear	Plastic, Rubber	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	00000
3	16 oz.	Can	60 sec.	7 days	Thin Liquid	Not Rated	Not Rated	Clear	Plastic, Rubber	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	00000
4052	16 oz.	Can	15 min.	7 days	Thin Liquid	500	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	00000
4052	1 gal.	Can	15 min.	7 days	Thin Liquid	500	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	000000
4707	16 oz.	Can	10 min.	21 days	Thick Liquid	4,000	Not Rated	White	Plastic	__	0000000	00000
4707	1 gal.	Can	10 min.	21 days	Thick Liquid	4,000	Not Rated	White	Plastic	__	0000000	00000
4807	1 gal.	Can	10 min.	21 days	Thin Liquid	600	Not Rated	White	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	000000

Contact Adhesives

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

4693 works on hard-to-bond plastics, such as polypropylene and polyethylene.

Black adhesive works especially well on foam insulation.

Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
3M Adhesives
826	32 oz.	Can	45 min.	72 hrs.	1,810	Thin Liquid	1,000	-10° to 230°	Amber	Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	0000000
1099	32 oz.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	00000000	00000
1099	1 gal.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	00000000	000000
1357	1 gal.	Can	10 min.	24 hrs.	158	Thin Liquid	325	-30° to 220°	Light Yellow	Ceramic, Glass, Masonry, Metal, Wood	CT, DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
2262	32 oz.	Can	10 min.	24 hrs.	Not Rated	Thin Liquid	525	-10° to 230°	Clear	Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	000000
4475	32 oz.	Can	10 min.	72 hrs.	Not Rated	Thick Liquid	8,500	-10° to 230°	Clear	Ceramic, Fabric, Glass, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
4693	32 oz.	Can	60 min.	72 hrs.	Not Rated	Thin Liquid	225	-10° to 230°	Amber	Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	00000
4693	1 gal.	Can	60 min.	72 hrs.	Not Rated	Thin Liquid	225	-10° to 230°	Amber	Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
Pliobond Adhesives
20	1 oz.	Tube	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Glass, Metal, Plastic, Rubber	__	0000000	0000
25	3 oz.	Brush-Top Bottle	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	8 oz.	Brush-Top Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	16 oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	32 oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	00000
25	1 gal.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000
Weldwood Adhesives
__	3 oz.	Bottle	15 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 150°	Beige	Composites, Plastic, Rubber, Wood	__	0000000	0000
__	16 oz.	Can	15 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Beige	Composites, Plastic, Rubber, Wood	__	0000000	00000
Adhesives
__	4 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	8 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	16 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	16 oz.	Brush-Top Can	3 min.	36 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 250°	Black	Foam, Masonry, Metal, Plastic, Rubber	__	00000000	00000
__	32 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	00000
__	1 gal.	Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000

Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, gal.	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	For Joining	Color		Each
3M Adhesives
1000NF	1	Jug	60 sec.	10 min.	400	Thin Liquid	750	60° to 80°	Fabric, Foam, Wood	Purple	00000000	0000000

Nonflammable Contact Adhesives

Bond porous materials with these low-odor, nonflammable adhesives. Apply to both surfaces, air dry, and then bring together to bond.

Container
Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength	Consistency	Viscosity	Temp. Range, °F	Color	For Joining		Each
Weldwood Adhesives
32 oz.	Can	30 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Amber	Cardboard, Composites, Fabric, Wood	0000000	000000
1 gal.	Can	30 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Amber	Cardboard, Composites, Fabric, Wood	0000000	00000

Construction Adhesives for Stair Treads

Install treads on concrete and wood stairs with this strong, water-resistant adhesive.

Container					Strength
Size, gal.	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
1	Pail	150 sq. ft. @ 1/16" bead	15 min.	24 hrs.	Not Rated	Not Rated	Paste	55° to 85°	White	No	Masonry, Plastic, Rubber, Wood	00000000	000000

Construction Adhesives for Nosing

Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.

Container					Strength
Size, oz.	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Mix Ratio	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
32	Can	75 ft. @ 1/4" bead	45 min.	24 hrs.	Not Rated	Not Rated	1:1	Paste	70° to 80°	Beige	No	Masonry, Plastic, Rubber	00000000	000000

Construction Adhesives for Flooring

Bond carpeting, vinyl tile, and other floor coverings to subfloors with these water-resistant adhesives.

Container					Strength
Size	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
1 gal.	Pail	33 sq. ft. @ 1/8" bead	15 min.	24 hrs.	Not Rated	Not Rated	Thick Liquid	65° to 85°	Beige	No	Plastic, Wood	00000000	000000

Primers for Pipe Cement for Plastic Pipe

Prepare PVC and CPVC pipe for bonding.

Container Type	Drying Time, min.	Consistency	Viscosity, cP	Color	Specifications Met		8 oz.	16 oz.	32 oz.
Brush-Top Can	5	Thin Liquid	100	Clear	ASTM F656	00000000	00000	000000	000000
Brush-Top Can	5	Thin Liquid	Not Rated	Purple	ASTM F656	00000000	0000	00000	00000

Grout

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.

Acrylic grout does not require mixing. It resists shrinking, cracking, and staining.

Container
Size	Type	Reaches Full Strength	Consistency	For Max. Crack Wd.	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Application Temp. Range, °F	Color	For Use On		Each
Acrylic
1 gal.	Pail	24 hrs.	Paste	1/2"	101 sq. ft. @ 1/4"	1/2"	No	50° to 100°	Beige	Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone	00000000	000000
1 gal.	Pail	24 hrs.	Paste	1/2"	101 sq. ft. @ 1/4"	1/2"	No	50° to 100°	Gray	Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone	00000000	00000
1 gal.	Pail	24 hrs.	Paste	1/2"	101 sq. ft. @ 1/4"	1/2"	No	50° to 100°	White	Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone	00000000	00000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	0.1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	0.1 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
														Each
Devcon Aluminum Liquid
10710	1 lbs.	Jar	75	16 hrs.	Thick Liquid	9:1	70 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	__	00000000	000000
10720	3 lbs.	Jar	75	16 hrs.	Thick Liquid	9:1	210 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	__	00000000	000000
Devcon Aluminum Putty
10610	1 lbs.	Jar	60	16 hrs.	Putty	9:1	70 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	__	00000000	000000
10620	3 lbs.	Jar	60	16 hrs.	Putty	9:1	210 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	__	00000000	000000
Devcon FasMetal™ 10 HVAC Repair
19770	6.5 oz.	Tube	60	16 hrs.	Paste	1:1	30 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	__	00000000	00000

Light-Activated Surface Filler Pens

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. They can be used with most types of metal as well as ceramic, stone, and porcelain.

Pens

Formulation	Container Size, oz.	Begins to Harden, sec.	Reaches Full Strength, sec.	Consistency	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On	Batteries Included		Each
Acrylic	0.2	3	12	Gel	Yes	0° to 245°	Clear	Drill, Sand	Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Ceramic, Porcelain, Stone	Yes	000000	000000

Refill Cartridges

Formulation	Color	Clarity	Consistency	Container Size, oz.		Each
Acrylic	Black	Opaque	Gel	0.2	000000	000000
Acrylic	Clear	Clear	Gel	0.2	000000	00000
Acrylic	White	Opaque	Gel	0.2	000000	00000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Temp. Range, °F	Color	For Use On		Each
16	Jug	7	10	Thick Liquid	Not Rated to 500°	Brown	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Roof Patching Compounds

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Apply acrylic compounds to dry surfaces.

Container
Size, gal.	Type	Consistency	Begins to Harden	Reaches Full Strength	Approximate Coverage @ Thick.	Max. Thick.	Application Temp. Range, °F	Color	For Use Outdoors	For Use On		Each
Acrylic Compounds
1	Can	Thick Liquid	4 hrs.	24 hrs.	12 sq. ft. @ 1/8"	1/4"	50° to 90°	White	Yes	Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood	00000000	000000

Thick High-Temperature Gasketing Adhesives in Cartridges

The adhesive seals fiberglass gaskets into stove doors as well as seals cracks in metal. Use the cartridge with a standard caulk gun for quick and easy dispensing.

Container Size, oz.	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
10.3	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry	0000000	00000

Thick High-Temperature Gasketing Adhesives

Seal fiberglass gaskets into stove doors as well as seals cracks in metal.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
2.3	Tube	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry	0000000	00000

Thin High-Temperature Gasketing Adhesives

This adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
2.3	Tube	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Steel, Cast Iron, Fiberglass	0000000	00000

Thin High-Temperature Gasketing Adhesives in Cartridges

The adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel. Use the cartridge with a standard caulk gun for quick and easy dispensing.

Container Size, oz.	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
10.3	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Steel, Cast Iron, Fiberglass	0000000	00000

Brush Floor Applicators

Apply concrete and asphalt sealants as well as floor coatings. Brushes can also be used to apply roof coatings.

Wd.	Ht.	Handle Lg.	Material	Handle Material	Frame Material	Features		Each
18"	2"	60"	Plastic	Wood	Wood	Squeegee	0000000	000000

Surface-Preparation Cleaners for Pipe Cement for Plastic Pipe

Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.

Container
Type	Size, oz.	Composition	Harshness	For Use On	For Removing	Primary Chemical		Each
Liquid
Brush-Top Can	8	Solvent Based	Harsh	Plastic, Vinyl	Dirt, Grease/Oil, Wax	Acetone (75-95%)	00000000	00000
Brush-Top Can	16	Solvent Based	Harsh	Plastic, Vinyl	Dirt, Grease/Oil, Wax	Acetone (75-95%)	00000000	00000
Brush-Top Can	32	Solvent Based	Harsh	Plastic, Vinyl	Dirt, Grease/Oil, Wax	Acetone (75-95%)	00000000	00000