Direct light where it’s needed with this pivoting-head flashlight. When plugged in, it will automatically light up if the power goes out. With long-lasting, built-in LEDs, this flashlight is more efficient and generates less heat than flashlights with other light technologies. It casts a bull’s eye beam pattern, which has a bright center that reaches long distances. This flashlight has a flat bottom, so you can work hands-free without it rolling away. It's IP04 rated, so it withstands liquid splashed from all angles. It cannot be sold to Canada due to energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a bull’s eye beam, which has a bright center that reaches long distances. Rated IP04, they withstand liquid splashed from all angles. They cannot be sold to Canada due to energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Always have a flashlight on hand—these attach to a key ring. All have a nonslip grip to ensure a secure hold. All keychain flashlights were tested and rated to ANSI/NEMA FL 1 standards.

LED lights produce more light, are more efficient, and generate less heat than incandescent lights. They cast a uniform beam, which is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Rated for use in environments where hazardous material is present. These flashlights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Flashlights with a uniform beam are especially good for close-up tasks and inspection work. Flashlights with a bull’s eye beam have a bright center for long-distance illumination.

Flashlights that cannot be sold to the regions listed are restricted by local energy efficiency regulations.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Clip this little flashlight to any surface up to 1/2" thick and keep your hands free for work. It's rated for use in environments where hazardous material is present. With long-lasting, built-in LEDs, it is more efficient and generates less heat than flashlights with other light technologies. This flashlight casts a bull’s eye beam; the center is brighter than the edges for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Attach to your key ring so you’ll always have a flashlight on hand. They're rated for use in environments where hazardous material is present. With a long-lasting, built-in LED, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up work and inspection tasks.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

80-lumens flashlights are rated IP04 to withstand liquid splashed from all directions.

Free your hands for other work by mounting a flashlight to a nearby surface. Flashlights are sold separately.

Securely store your flashlight when not in use.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit. All are IP rated for resistance to splashing liquid from all directions.

Headlamps with an adhesive mount attach directly to hard hats. They come with an alternate slip-resistant silicone strap, and clips for securing the strap to hard hats.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

Use headlamps with ultraviolet LED lights for fluorescent leak detection in HVAC-R systems.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Bring light to areas that don't have electrical power service. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral white light that's often found in workspaces. This light has an impact-resistant plastic lens to protect the LEDs.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.

Style A casts a neutral light that's consistent with the type of light often found in workspaces.

Style B casts a cool light that highlights white/blue tones, which is good for inspecting. It comes with a pistol-grip handle and a clamp attachment; swap-out the handle for the clamp when you need your hands free for other work. They cannot be sold to the regions listed due to local energy efficiency requirements.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in styles A, B, C, and E are built-in, while style D comes with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Styles G, H, and J lights are furnished with replaceable fluorescent bulbs. They produce a cool light that highlights white/blue tones, which is good for inspecting. Fluorescent lights last longer and generate less heat than halogen lights. All have an impact-resistant plastic lens to protect the bulb.

Style K comes with a replaceable incandescent bulb. It has an impact-resistant plastic lens to protect the bulb.

Bulbs that cannot be sold to Canada exceed local regulatory limits on mercury content.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Style C lights are furnished with an incandescent bulb and an impact-resistant plastic lens.

Provide 360° of lighting with these lanterns. They cast a cool light that highlights white/blue tones, which is good for inspecting.

Style B is rated IP07 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. It has built-in LEDs that last longer, are more efficient, and generate less heat than CFL bulbs. The handle folds down when not in use for compact storage.

Style C is rated IP04 to withstand liquid splashed from all angles. It has built-in LEDs that last longer, are more efficient, and generate less heat than CFL bulbs.

Note: Battery life is significantly reduced when lanterns are used at the high-beam setting.