Search Results
Material Material |
|---|
|
Performance Properties Performance Properties |
|---|
Clarity Clarity |
|---|
 |
| Clear |
 |
| Semi-Clear |
 |
| Opaque |
Inside Width Inside Width |
|---|
Inside Height Inside Height |
|---|
Flexibility Flexibility |
|---|
 | Flexible |
 | Semi-Rigid |
 | Rigid |
For Use With For Use With |
|---|
Impact Strength Impact Strength |
|---|
|
Specifications Met Specifications Met |
|---|
|
|
About Plastic
More
About Composites
More
Chemical-Resistant PVC 90° Angles
- Color: Gray
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,000-7,800 psi (Good)
- Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: No
Because these PVC Type 1 90° angles stand up to acids and alkalies, they’re often used to fabricate frames, tracks, and supports in chemical-processing applications. This material is easy to thermoform, plus it is an excellent electrical insulator.
Outside | Inside | 5 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.08" Wall Thick. (-0.01" to 0.001") | |||||||
| 1/2" | 0.000" to 0.125" | 1/2" | 0.000" to 0.125" | 0.420" | 0.42" | 0000000 | 00000 |
| 3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.670" | 1.42" | 0000000 | 00000 |
| 3/4" | 0.000" to 0.125" | 3/4" | 0.000" to 0.125" | 0.670" | 0.67" | 0000000 | 0000 |
0.08" Wall Thick. (-0.01" to 0.01") | |||||||
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.920" | 1.92" | 0000000 | 00000 |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 0000 |
1/8" Wall Thick. (-0.015" to 0.015") | |||||||
| 3/4" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 5/8" | 2 7/8" | 0000000 | 00000 |
| 1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 3/8" | 1 3/8" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 00000 |
0.157" Wall Thick. (-0.019" to 0.019") | |||||||
| 3/4" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 0.593" | 1.343" | 0000000 | 00000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
3/16" Wall Thick. (-0.023" to 0.023") | |||||||
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 13/16" | 1 13/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/2" | 0.000" to 0.050" | 1 1/2" | 0.000" to 0.050" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | 0.000" to 0.060" | 2" | 0.000" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
1/4" Wall Thick. (-0.03" to 0.03") | |||||||
| 1 1/4" | 0.000" to 0.040" | 1 1/4" | 0.000" to 0.040" | 1" | 1" | 0000000 | 00000 |
0.275" Wall Thick. (-0.033" to 0.033") | |||||||
| 2 3/8" | -0.125" to 0.125" | 2 3/8" | -0.125" to 0.125" | 2.100" | 2.1" | 0000000 | 00000 |
| 3 1/2" | -0.125" to 0.125" | 3 1/2" | -0.125" to 0.125" | 3.225" | 3.225" | 0000000 | 00000 |
Slippery UHMW Polyethylene 90° Angles
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, Made of FDA Listed Material
Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/4" Wall Thick. (-0.060" to 0.060") | ||||||||
| 5/8" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 3/8" | 1 1/4" | 0000000 | 00000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 1/4" | 1 1/4" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 0000 | |
1/2" Wall Thick. (-0.060" to 0.060") | ||||||||
| 3" | -0.060" to 0.060" | 3" | -0.060" to 0.060" | 2 1/2" | 2 1/2" | 0000000 | 00000 | |
| 3 1/2" | -0.060" to 0.060" | 3 1/2" | -0.060" to 0.060" | 3" | 3" | 0000000 | 00000 | |
Polypropylene 90° Angles
- Color: Semi-Clear White
- Temperature Range: -40° to 180° F
- Tensile Strength: 5,200 psi (Good)
- Impact Strength: 1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: No
- Specifications Met: Made of FDA Listed Material
Fabricate guide rails and parts for use in laboratories with these 90° angles. They’re polypropylene, so they have a hard, slippery surface that won’t stick to cutting tools. They also resist swelling when exposed to water.
Chemical-Resistant Slippery PTFE 90° Angles
- Color: White
- Temperature Range: -350° to 500° F
- Tensile Strength: 2,170-2,800 psi (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: Durometer 52D-55D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: AMS 3671, ASTM D1710, Made of FDA Listed Material, UL 94V0
Often used as guide rails and with parts that slide, these 90° angles have a slippery surface that prevents sticking. PTFE surpasses most plastic when it comes to chemical resistance and performance in extreme temperatures. It’s also an excellent electrical insulator and easy to machine.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wall Thick. | Wall Thick. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Wd. | Lengths, ft. | Per Ft. | |
| 1/16" | 0.000" to 0.015" | 1/2" | -0.05" to 0.05" | 1/2" | 7/16" | 7/16" | 0000000 | 00000 | |
| 1/8" | 0.000" to 0.015" | 1" | -0.05" to 0.05" | 1" | 7/8" | 7/8" | 0000000 | 00000 | |
| 1/4" | 0.000" to 0.015" | 1 1/2" | -0.05" to 0.05" | 1 1/2" | 1 1/4" | 1 1/4" | 0000000 | 00000 | |
| 1/4" | 0.000" to 0.015" | 2" | -0.05" to 0.05" | 2" | 1 3/4" | 1 3/4" | 0000000 | 000000 | |
Clear Impact-Resistant Polycarbonate 90° Angles
- Color: Clear
- Temperature Range: -40° to 200° F
- Tensile Strength: 8,960 psi (Good)
- Impact Strength: Not Rated
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: No
Often used when making display racks and machine guards, these 90° angles are made of polycarbonate. This material is comparable to Lexan, Hyzod, Tuffak, and Makrolon.
Outside | Inside | ||||||
|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
2 ft. Lg. | |||||||
0.05" Wall Thick. (-0.005" to 0.005") | |||||||
| 1/2" | -0.030" to 0.030" | 1/2" | -0.030" to 0.030" | 0.45" | 0.45" | 0000000 | 00000 |
| 1" | -0.030" to 0.030" | 1" | -0.030" to 0.030" | 0.95" | 0.95" | 0000000 | 0000 |
| 1 1/2" | -0.030" to 0.030" | 1 1/2" | -0.030" to 0.030" | 1.45" | 1.45" | 0000000 | 0000 |
4 ft. Lg. | |||||||
0.05" Wall Thick. (-0.005" to 0.005") | |||||||
| 1/2" | -0.030" to 0.030" | 1/2" | -0.030" to 0.030" | 0.45" | 0.45" | 0000000 | 0000 |
| 1" | -0.030" to 0.030" | 1" | -0.030" to 0.030" | 0.95" | 0.95" | 0000000 | 0000 |
| 1 1/2" | -0.030" to 0.030" | 1 1/2" | -0.030" to 0.030" | 1.45" | 1.45" | 0000000 | 00000 |
Clear Chemical-Resistant PVC 90° Angles
- Color: Clear
- Temperature Range: 32° to 140° F
- Tensile Strength: 7,260 psi (Good)
- Impact Strength: 0.48-2 ft.-lbs./in. (Poor)
- Hardness: Durometer 84D (Hard)
- For Use Outdoors: No
- Specifications Met: Made of FDA Listed Materials, UL 94VO
When visibility is essential, use these clear 90° angles for tank parts and in chemical-processing applications. PVC resists acids and alkalies.
Outside | Inside | 5 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
1/8" Wall Thick. (-0.063" to 0.063") | |||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 7/8" | 7/8" | 0000000 | 000000 |
3/16" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/4" | -0.125" to 0.125" | 1 1/4" | -0.125" to 0.125" | 1 1/16" | 1 1/16" | 0000000 | 00000 |
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.063" to 0.063") | |||||||
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
Structural FRP Fiberglass 90° Angles
- Color: Green
- Max. Temperature: 140° F
- Tensile Strength: 7,000-40,000 psi (Good)
- Impact Strength: 4-30 ft.-lbs./in. (Excellent)
- Hardness: Barcol 45 (Hard)
- For Use Outdoors: Yes
A lightweight alternative to wood in structural applications, these FRP fiberglass 90° angles are strong. They're made of fiberglass reinforced polyester.
Outside | Inside | ||||||
|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Each | |
2 ft. Lg. | |||||||
1/8" Wall Thick. (-0.0130" to 0.0130") | |||||||
| 1" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 7/8" | 7/8" | 0000000 | 00000 |
| 1 1/4" | -0.094" to 0.094" | 1 1/4" | -0.094" to 0.094" | 1 1/8" | 1 1/8" | 0000000 | 0000 |
3/16" Wall Thick. (-0.0190" to 0.0190") | |||||||
| 3/4" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 9/16" | 13/16" | 0000000 | 0000 |
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.0250" to 0.0250") | |||||||
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 3/4" | 3 3/4" | 0000000 | 00000 |
3/8" Wall Thick. (-0.0380" to 0.0380") | |||||||
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 5/8" | 2 5/8" | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 5/8" | 3 5/8" | 0000000 | 00000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 5/8" | 5 5/8" | 0000000 | 00000 |
1/2" Wall Thick. (-0.0500" to 0.0500") | |||||||
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 1/2" | 3 1/2" | 0000000 | 00000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 1/2" | 5 1/2" | 0000000 | 00000 |
5 ft. Lg. | |||||||
1/8" Wall Thick. (-0.0130" to 0.0130") | |||||||
| 1" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 7/8" | 7/8" | 0000000 | 00000 |
| 1 1/4" | -0.094" to 0.094" | 1 1/4" | -0.094" to 0.094" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
3/16" Wall Thick. (-0.0190" to 0.0190") | |||||||
| 3/4" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 9/16" | 13/16" | 0000000 | 00000 |
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.0250" to 0.0250") | |||||||
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 3/4" | 3 3/4" | 0000000 | 00000 |
3/8" Wall Thick. (-0.0380" to 0.0380") | |||||||
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 5/8" | 2 5/8" | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 5/8" | 3 5/8" | 0000000 | 00000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 5/8" | 5 5/8" | 0000000 | 000000 |
1/2" Wall Thick. (-0.0500" to 0.0500") | |||||||
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 1/2" | 3 1/2" | 0000000 | 00000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 1/2" | 5 1/2" | 0000000 | 000000 |
10 ft. Lg. | |||||||
1/8" Wall Thick. (-0.0130" to 0.0130") | |||||||
| 1" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 7/8" | 7/8" | 0000000 | 00000 |
| 1 1/4" | -0.094" to 0.094" | 1 1/4" | -0.094" to 0.094" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
3/16" Wall Thick. (-0.0190" to 0.0190") | |||||||
| 3/4" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 9/16" | 13/16" | 0000000 | 00000 |
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.0250" to 0.0250") | |||||||
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 3/4" | 3 3/4" | 0000000 | 00000 |
3/8" Wall Thick. (-0.0380" to 0.0380") | |||||||
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 5/8" | 2 5/8" | 0000000 | 000000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 5/8" | 3 5/8" | 0000000 | 000000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 5/8" | 5 5/8" | 0000000 | 000000 |
1/2" Wall Thick. (-0.0500" to 0.0500") | |||||||
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 1/2" | 3 1/2" | 0000000 | 000000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 1/2" | 5 1/2" | 0000000 | 000000 |
20 ft. Lg. | |||||||
1/8" Wall Thick. (-0.0130" to 0.0130") | |||||||
| 1" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 7/8" | 7/8" | 0000000 | 00000 |
| 1 1/4" | -0.094" to 0.094" | 1 1/4" | -0.094" to 0.094" | 1 1/8" | 1 1/8" | 0000000 | 00000 |
3/16" Wall Thick. (-0.0190" to 0.0190") | |||||||
| 3/4" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 9/16" | 13/16" | 0000000 | 00000 |
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 5/16" | 1 5/16" | 0000000 | 00000 |
1/4" Wall Thick. (-0.0250" to 0.0250") | |||||||
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 1/4" | 1 1/4" | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | 0000000 | 000000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 3/4" | 3 3/4" | 0000000 | 000000 |
3/8" Wall Thick. (-0.0380" to 0.0380") | |||||||
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 5/8" | 2 5/8" | 0000000 | 000000 |
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 5/8" | 3 5/8" | 0000000 | 000000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 5/8" | 5 5/8" | 0000000 | 000000 |
1/2" Wall Thick. (-0.0500" to 0.0500") | |||||||
| 4" | -0.094" to 0.094" | 4" | -0.094" to 0.094" | 3 1/2" | 3 1/2" | 0000000 | 000000 |
| 6" | -0.094" to 0.094" | 6" | -0.094" to 0.094" | 5 1/2" | 5 1/2" | 0000000 | 000000 |
Arc-Resistant GPO3 Fiberglass 90° Angles
- Color: Red
- Max. Temperature: 265° F
- Tensile Strength: 10,000-15,000 psi (Good)
- Impact Strength: 8.2-12 ft.-lbs./in. (Excellent)
- Hardness: See table
- For Use Outdoors: No
- Specifications Met: UL 94V0
Because these GPO3 fiberglass 90° angles are arc and track resistant, they are often used for electrical applications in humid environments. They offer better electrical insulation properties than FRP fiberglass. Made of fiberglass-reinforced polyester, they're also called polyester-grade industrial laminate.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Hardness | Straightness Tolerance | Each | |
3 ft. Lg. | |||||||||
1/8" Wall Thick. (-0.0200" to 0.0200") | |||||||||
| 1 1/4" | -0.094" to 0.094" | 1 1/4" | -0.094" to 0.094" | 1 1/8" | 1 1/8" | Rockwell M95 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 3/8" | 1 3/8" | Rockwell M95 (Hard) | 0.050" per ft. | 0000000 | 0000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 7/8" | 1 7/8" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 4 3/16" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 4 1/16" | 1 7/8" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
3/16" Wall Thick. (-0.0200" to 0.0200") | |||||||||
| 2 9/16" | -0.094" to 0.094" | 1 5/8" | -0.094" to 0.094" | 2 3/8" | 1 7/16" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 1 5/8" | -0.094" to 0.094" | 3 13/16" | 1 7/16" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
1/4" Wall Thick. (-0.0200" to 0.0200") | |||||||||
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 2 3/4" | -0.094" to 0.094" | 2 3/4" | 2 1/2" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | Rockwell M95 (Hard) | 0.050" per ft. | 0000000 | 00000 |
6 ft. Lg. | |||||||||
1/8" Wall Thick. (-0.0200" to 0.0200") | |||||||||
| 1 1/4" | -0.094" to 0.094" | 1 1/4" | -0.094" to 0.094" | 1 1/8" | 1 1/8" | Rockwell M95 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 3/8" | 1 3/8" | Rockwell M95 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 7/8" | 1 7/8" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 4 3/16" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 4 1/16" | 1 7/8" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
3/16" Wall Thick. (-0.0200" to 0.0200") | |||||||||
| 2 9/16" | -0.094" to 0.094" | 1 5/8" | -0.094" to 0.094" | 2 3/8" | 1 7/16" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 4" | -0.094" to 0.094" | 1 5/8" | -0.094" to 0.094" | 3 13/16" | 1 7/16" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
1/4" Wall Thick. (-0.0200" to 0.0200") | |||||||||
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 2 3/4" | -0.094" to 0.094" | 2 3/4" | 2 1/2" | Barcol 50 (Hard) | 0.050" per ft. | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | Rockwell M95 (Hard) | 0.050" per ft. | 0000000 | 00000 |
Flame-Retardant FRP Fiberglass 90° Angles
- Color: Gray
- Max. Temperature: 140° F
- Tensile Strength: 7,000-40,000 psi (Good)
- Impact Strength: 4-30 ft.-lbs./in. (Excellent)
- Hardness: Barcol 45 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM E84 Class A
These lightweight FRP fiberglass 90° angles, which are made with a flame-retardant resin, meet ASTM E84 Class A. An alternative to wood in structural applications, they're strong and lightweight.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Straightness Tolerance | Each | |
5 ft. Lg. | ||||||||
1/8" Wall Thick. (-0.013" to 0.013") | ||||||||
| 1" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 7/8" | 7/8" | 0.050" per ft. | 0000000 | 000000 |
1/4" Wall Thick. (-0.025" to 0.025") | ||||||||
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 1/4" | 1 1/4" | 0.050" per ft. | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | 0.050" per ft. | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | 0.050" per ft. | 0000000 | 00000 |
10 ft. Lg. | ||||||||
1/8" Wall Thick. (-0.013" to 0.013") | ||||||||
| 1" | -0.094" to 0.094" | 1" | -0.094" to 0.094" | 7/8" | 7/8" | 0.050" per ft. | 0000000 | 00000 |
1/4" Wall Thick. (-0.025" to 0.025") | ||||||||
| 1 1/2" | -0.094" to 0.094" | 1 1/2" | -0.094" to 0.094" | 1 1/4" | 1 1/4" | 0.050" per ft. | 0000000 | 00000 |
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | 1 3/4" | 0.050" per ft. | 0000000 | 00000 |
| 3" | -0.094" to 0.094" | 3" | -0.094" to 0.094" | 2 3/4" | 2 3/4" | 0.050" per ft. | 0000000 | 000000 |
Multipurpose Flame-Retardant Garolite G-10/FR4 Angles
- Color: Yellow
- Max. Temperature: 265° F
- Tensile Strength: 32,000-40,000 psi (Excellent)
- Impact Strength: 5.5-9.5 ft.-lbs./in. (Excellent)
- Hardness: Rockwell M100 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: MIL-I-24768/27
A good all-around choice, these Garolite G-10/FR4 angles are strong, machinable, and electrically insulating. They're made of flame-retardant epoxy resin with fiberglass fabric reinforcement. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.
Outside | Inside | 30" Lg. | |||||
|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Each | |
1/8" Wall Thick. (-0.028" to 0.028") | |||||||
| 1" | -0.063" to 0.063" | 1" | -0.063" to 0.063" | 7/8" | 7/8" | 0000000 | 0000000 |
| 1 1/2" | -0.063" to 0.063" | 1 1/2" | -0.063" to 0.063" | 1 3/8" | 1 3/8" | 0000000 | 000000 |
| 2" | -0.063" to 0.063" | 2" | -0.063" to 0.063" | 1 7/8" | 1 7/8" | 0000000 | 000000 |
3/16" Wall Thick. (-0.028" to 0.028") | |||||||
| 1" | -0.063" to 0.063" | 1" | -0.063" to 0.063" | 13/16" | 13/16" | 0000000 | 000000 |
| 1 1/2" | -0.063" to 0.063" | 1 1/2" | -0.063" to 0.063" | 1 5/16" | 1 5/16" | 0000000 | 000000 |
| 2" | -0.063" to 0.063" | 2" | -0.063" to 0.063" | 1 13/16" | 1 13/16" | 0000000 | 000000 |
1/4" Wall Thick. (-0.028" to 0.028") | |||||||
| 1" | -0.063" to 0.063" | 1" | -0.063" to 0.063" | 3/4" | 3/4" | 0000000 | 000000 |
| 1 1/2" | -0.063" to 0.063" | 1 1/2" | -0.063" to 0.063" | 1 1/4" | 1 1/4" | 0000000 | 000000 |
| 2" | -0.063" to 0.063" | 2" | -0.063" to 0.063" | 1 3/4" | 1 3/4" | 0000000 | 000000 |