Connect two pipes that are up to 100 feet apart—cut the connector to the length you need and attach a clamp to each end.

These connectors are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems.

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

Use in high-pressure applications up to 500 psi.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

Connect to CPVC pipe fittings for use in high-temperature plumbing and water supply applications up to 170° or 200° F.

With thicker, stronger walls than standard-wall pipe, this Schedule 80 pipe can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Use for pressures up to 550 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

These PVDF fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. PVDF is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

The inside of this pipe won’t leach contaminants into your line or accumulate particles—it’s polished to an ultra-smooth 12 Ra finish, which also makes it easy to clean. Made of polypropylene, it resists organic solvents, acids, and alkalis better than CPVC pipe.

Made of PVDF that’s finished to a 12 Ra smoothness, this pipe handles some of the harshest chemicals without leaching contaminants into your line.

With excellent corrosion resistance, this pipe can handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. Layers of fiberglass give this pipe better strength and durability than any of our other pipe for chemicals.

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

These fittings are NSF certified for use in corrosive waste gravity-flow systems. Made of CPVC, they have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances.

Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies.

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.

These adapters connect PVC waste pipe to cast iron pipe without adding bulk. Instead of securing pipes together from the outside like clamp-on couplings, these flexible adapters fit into cast iron pipe to create a tight compression seal.

Made of either nylon or acetal, these fittings resist corrosion, so they won't deteriorate in food processing applications. They won’t transfer tastes or odors to your food or beverages.

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

Reduce stress, vibration, and noise in your plastic socket-connect piping system by creating a point of flexibility.

Choose these metal fittings when you need better durability than our plastic push-to-connect fittings.

Use these fittings in an air vacuum system to avoid the hassle of brazing and welding. Insert two fittings into a clamp and tighten to form a secure seal in steel tubing.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

Made of brass, these fittings have good corrosion resistance.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards.

Color-code your lines by snapping these rings over the release ring on low-temperature D.O.T. push-to-connect tube fittings.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.

Fittings have good corrosion resistance.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Fittings have good corrosion resistance.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Monitor flow with these clear fittings.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Made of acetal, these compression fittings are lighter in weight than metal compression fittings and won’t absorb moisture when used in wet environments.

Made of brass, these couplings are more durable than plastic couplings.

Made of plastic, these couplings are lighter in weight than metal luer lock couplings. They're a popular choice in labs because of their versatility—they fit any other luer lock plug, socket, syringe, or needle.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line.

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Fittings can withstand temperatures up to 200° F.

Create a leak-tight seal between polyethylene (PEX) tubing and press-connect fittings for drinking water—no heat or solder necessary.

Fittings withstand temperatures up to 220° F.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

Connect hot food and beverage lines with just a push. Also known as instant fittings, they have an internal gripping ring and an O-ring that hold tight to tubing.

Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.