Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Use these dust caps and plugs to keep contaminants out of your hose line.

Made of nylon, these fittings are lighter in weight than metal garden hose fittings. Attach them to garden hose for a variety of water supply applications.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.

To keep contaminants out of your gas line, add these dust caps and plugs to natural and LP gas couplings when they’re not connected. All work with couplings that are rated ANSI Z21.41/CSA 6.9 for use with gas fuel appliances.

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

Push these plugs into an opening and friction holds them in place.

Push these plugs into an opening and friction holds them in place.

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

Slide these caps over a tool handle or other round object and use the eye to hang it.

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Place these flexible vinyl caps over the ends of your angle iron and they conform for a snug fit.

Slide these flexible vinyl caps onto rectangular objects and they conform for a snug fit.

Protect externally threaded components from contaminants during fabrication and storage.

Slide these flexible vinyl caps on and they conform for a snug fit. Pull the tab for easy removal.

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Stretch these caps over flared edges such as flanged tubing and valve handles.