In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

This material suppresses static charges to prevent dust from building up.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

The addition of glass fibers makes this material more abrasion resistant than standard UHMW. It’s also known as Tivar 88.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as starboard, this material won’t degrade when exposed to salt water, humidity, and UV light. It’s more rigid than standard HDPE.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Often used for packaging and construction applications, this film is also known as Visqueen.

A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

Made with virgin Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Kapton® polyimide film is an excellent electrical insulator.

Because this film dissipates heat, it is often used for printed circuit boards and power supplies.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

When compared to uncoated cast acrylic, this clear-coated cast acrylic is 45 times more scratch resistant.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

With a clear coating that provides protection from abrasion, UV light, and harsh cleaners, this polycarbonate is often used to create transit shelters and equipment shields.

Often used in security doors and windows to protect against forced entry, this laminated polycarbonate is nearly impenetrable.

PETG can be formed into complex shapes without sacrificing durability.

Carbon mesh is embedded into this clear PVC film to dissipate electrostatic discharge and protect sensitive electronic equipment.

Static cling allows this PVC film to stick without an adhesive.

Also called acetate, this is the same clear film that's used in window envelopes.

Also known as frisket film, this polypropylene has a low-tack adhesive that releases without leaving residue behind.

PFA film retains its performance properties through a wide range of temperatures. It is often used to insulate cables.

These selector packs come with one 2” square of acrylic, cast acrylic, cellulose, PETG, and polycarbonate.

Each selector pack includes one 2” square of FEP, polypropylene, PPS, PVC, CPVC, PVDF, and Teflon® PTFE.

Resistant to scratches and scuffs, mirrored acrylic is an economical alternative to mirrored polycarbonate.

Plastic plates withstand mild acids and are more corrosion resistant than metal plates.

Plastic legend plates withstand mild acids and are more corrosion resistant than metal plates.

Remove the surface layer of these plates to create an engraved message in a contrasting color.

Use these plastic plates to indicate the location for turning switches off in emergency situations.

These tag protectors have an eyelet in each corner to band them around parts, cables, and other equipment. Insert a tag and then seal the laminating flap to protect the tag from moisture and wear.

Engraved letters and beveled edges provide a polished look.

These tags are water resistant and almost impossible to tear. The perforated lower stub has the same number as the top portion so they can be matched.

Choose only the numbers you need.

These tags have a matte surface so writing won't smudge or rub off accidentally.

Label devices, machines, and other equipment around your food processing plant while reducing the risk of contaminating the food.

Tags are laminated in plastic so they hold up outdoors.

These tags have a large hole for easy hanging.

Made of Tyvek, these tags withstand mild acids and alkalies. Write on them with a permanent marker.

Indicate whether cylinders are full or empty.

Plastic tags withstand mild acids and are more corrosion resistant than metal tags.

These tags have a matte surface so writing won't smudge or rub off accidentally. Write on them with a permanent marker.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9, it offers better arc resistance in dry environments.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Use this Garolite glass carbon to divert static charges that can damage equipment.

Kevlar is a super-tough material that stands up to wear and abrasion.

A layer of foam is sandwiched between two pieces of carbon fiber to make a featherweight material that's even lighter than standard carbon fiber.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

With more than twice the heat tolerance of standard FRP fiberglass, this material withstands temperatures up to 370° F.

Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.

Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.

Narrow openings prevent items from falling through this grating and make it easier for carts to roll across.

Secure grating to your support structure.

These lightweight fiberglass treads are corrosion resistant, nonconductive, and nonmagnetic.

Protect stairs from wear or provide a new stair surface on worn stairs.

Give switches and outlets a finished look.

Pair wall plates and adapters to create a custom cover for existing receptacles and switches to give them a rejuvenated look, no rewiring required.

Close off unused outlets.