Shoe and Boot Protective Epoxy Coatings
Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.
Footwear Repair Adhesives
Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders. These polyurethane adhesives create a strong, flexible seal that keeps water out, so they’re also used to coat seams. Use on leather, plastic, and rubber. They fully harden in 10 hours and dry clear.
| Material | Color | Clarity | Consistency | Container Size, fl. oz. | Container Type | Begins to Harden | Reaches Full Strength | Mixing Required | Each | |
| Polyurethane Epoxy | Clear | Clear | Thick Liquid | 0.75 | Tube | 60 min. | 10 hrs. | No | 0000000 | 00000 |
Light-Activated Surface Fillers
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Epoxy fillers provide better adhesion and more corrosion resistance than polyester fillers.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Formulation | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Consistency | For Max. Crack Wd. | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
| Polyester | 3.5 | Tube | 1 | 3 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 220° | White | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 000000 |
| Epoxy | 3.5 | Bottle | 1 | 5 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 270° | Amber | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 00000 |
Surface Filler Patches
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
| Mfr. Model No. | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength | Mix Ratio | For Use Outdoors | Temp. Range, ° F | Color | Finishing Method | For Use On | Each | |
Devcon Zip Patch™ | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11500 | 4" | 9" | 5 | 4 hrs. | __ | Yes | -40° to 200° | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Ceramic, Wood | 0000000 | 0000000 |
Surface Fillers | ||||||||||||
| __ | 4" | 6" | 1 | 30 min. | 1:1 | Yes | Not Rated to 425° | Clear | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
Water-Resistant Surface Filler Kits
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
| Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, °F | Finishing Method | For Use On | Each | |
| 8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35° to 130° | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood | 0000000 | 000000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Component | No. of Pieces | Mfr. Model No. | Size | Type | Lg. | Wd. | Each | |
| Two-Part Epoxy | 6 | 101-TS | 0.6 fl. oz. | One-Time-Use Packet | __ | __ | 0000000 | 000000 |
| Resin | 1 | 105 | 1 qt. | Can | __ | __ | 0000000 | 00000 |
| Fast Hardener | 1 | 205 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
| Slow Hardener | 1 | 206 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 1.7 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 5.5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
| Low-Density Filler | 1 | 410 | 5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
| Mini Dispensing Pump | 3 | 300 | __ | __ | __ | __ | 0000000 | 00000 |
| Fiberglass Cloth | 1 | 745 | __ | __ | 30" | 30" | 0000000 | 00000 |
Spin-Weld Plastic Tank Patches
Repair holes in plastic tanks and containers with these patches. As you spin these patches with a handheld electric router, they melt into the surface of your tank for a seal without any joints. To hold these patches in your router, you’ll need the installation tool (sold separately).
For proper installation, you’ll want to use a hole saw to drill a hole that matches the For Hole Diameter listed and check that your router meets the speed and power requirements shown in the table.
For technical drawings and 3-D models, click on a part number.
For Tank | For Router | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | For Hole Dia. | For Min. Wall Thick. | Material | Material | Surface | Power, hp | Speed, rpm | Temperature Range, °F | Color | For Use With | Each | |
| 2 1/4" | 1.55" | 3/16" | LDPE Plastic | LDPE Plastic | Flat | 1 1/2 | 18,000-25,000 | 40° to 140° | White | Oil, Water | 0000000 | 00000 |
| 3 3/8" | 2.2" | 3/16" | LDPE Plastic | LDPE Plastic | Flat | 1 1/2 | 18,000-25,000 | 40° to 140° | White | Oil, Water | 0000000 | 0000 |
