In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

This material suppresses static charges to prevent dust from building up.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

Also known as starboard, this material won’t degrade when exposed to salt water, humidity, and UV light. It’s more rigid than standard HDPE.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Often used for packaging and construction applications, this film is also known as Visqueen.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

Made with virgin Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Stronger and more rigid than Torlon 4301 and 4203 because they’re filled with glass, these Torlon 5030 rods are also electrical insulators like Torlon 4203.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

The strongest composite we offer, carbon fiber is comparable in strength to 6061 aluminum yet lighter in weight.

The strongest composite we offer, carbon fiber is comparable in strength to 6061 aluminum yet lighter in weight.

The strongest composite we offer, carbon fiber is comparable in strength to 6061 aluminum yet lighter in weight.

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.

Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

This self-extinguishing tubing meets UL 94V0 or UL 94V2 for flame retardance to delay the spread of flames to valuable equipment.

Run chemicals through this tubing at temperatures between -450° F and 500° F.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

This tubing offers superior impact and crack resistance—even at low temperatures.

Pull and stretch this mesh to accommodate irregular shapes without fraying.

This shim stock is color-coded by thickness for easy identification. Cut it into custom shapes to fit your application.

Print clean lines and sharp details with these user-friendly PLA filaments.

Print parts that will protect equipment from electrostatic shocks without worrying about clogging nozzles, warping, or using a heated print surface. These filaments combine the properties of PLA that make it known for being easy to print with a compound that makes it static dissipative, so your printed parts can be used around sensitive electronics.

Produce holders and housings to guard flammable materials and machinery.

Print tough, long-lasting parts that won’t scratch or wear out from constant motion and friction, such as gears, bearings, and washers.

Stretchy, soft, and sturdy, these filaments make durable parts that resist wear and breakage despite repeated use. Stronger than ABS and PLA filaments, they create long-lasting, wear-resistant parts, such as seals, sleeves, and gaskets, as well as components that take on high-impact forces, such as springs and snap-fit parts.

Form pliable parts that divert electrostatic charges in a controlled way, protecting electronic equipment from damage. Made of soft TPU plastic with an added static dissipative compound, these filaments are used to create gaskets, springs, grippers, and snap-fit parts that will be used around sensitive electronics.

Make packaging and containers for sensitive electronics that will safely divert electrostatic charges while shielding them from almost any solvents, acids, and bases. These filaments combine the exceptional chemical-resistance properties of PPS with a compound that makes it static dissipative.

Print water-resistant packaging or other parts that will be used near sensitive electronics with these filaments.

Compatible with the MakerBot Replicator 2 Desktop 3D Printer and all Fifth Generation MakerBot Replicator 3D printers.