In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as starboard, this material won’t degrade when exposed to salt water, humidity, and UV light. It’s more rigid than standard HDPE.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Often used for packaging and construction applications, this film is also known as Visqueen.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Made with virgin Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.

A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

Multiple colors allow you to color-code your line for easy identification.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

This resilient tubing won’t crack due to stress or impact.

Run chemicals through this tubing at temperatures between -450° F and 500° F.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

The corrugated design allows this tubing to extend and compress just like an accordion.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

This tubing offers superior impact and crack resistance—even at low temperatures.

The smooth, nonabsorbing interior on this tubing resists material buildup, so it is easy to clean.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.

This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.

This wear-resistant nylon mesh has openings that meet an exact size tolerance, providing accurate, consistent results in filtering and sifting applications.

Pull and stretch this mesh to accommodate irregular shapes without fraying.

Pull and stretch this mesh to accommodate irregular shapes without fraying.

Even when wet, this mesh stays strong.

This shim stock is color-coded by thickness for easy identification. Cut it into custom shapes to fit your application.

Print clean lines and sharp details with these user-friendly PLA filaments.

Print tough, long-lasting parts that won’t scratch or wear out from constant motion and friction, such as gears, bearings, and washers.

Draw heat away from electronics to keep them at a healthy operating temperature. These TPE filaments not only dissipate heat, but they’re also lightweight and flexible, making them a great choice for printing screen cases.

When 3D printing a model with overhangs or hollow spaces, use these filaments to prevent the model from losing its shape. They support the structure during the printing and cooling process, then dissolve or snap away once the part is hardened.

Parts made with these filaments remain strong and rigid in temperatures that would soften most plastics.

Parts printed with these filaments absorb less moisture than other types of plastic, making them ideal for use in wet or humid environments.