This material suppresses static charges to prevent dust from building up.

Made with carbon black, these recycled UHMW sheets are a sustainable alternative to standard UHMW sheets in applications where static electricity is a concern, such as in conveying equipment and chute liners.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Prolonged outdoor exposure won’t discolor or degrade VHMW.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Made of recycled HDPE plastic, these sheets are more sustainable and economical than standard marine-grade moisture-resistant HDPE sheets.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals.

Add stiffness to composite sandwiches without adding a lot of weight.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Polyester resists swelling in wet environments.

These black polyester rods protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into valves, pump components, and spacers.

When moisture-resistant polyester is combined with PTFE, the result is this self-lubricating material. It’s also called Hydex and PBT.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Protect sensitive equipment from damaging electrical static charges.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Kapton® polyimide film is an excellent electrical insulator.

Use PFA in place of PTFE and FEP for durability in repetitive processes, such as pump parts. It is chemical resistant across a wide temperature range.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

When compared to uncoated cast acrylic, this clear-coated cast acrylic is 45 times more scratch resistant.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Enhanced UV resistance makes this polycarbonate better than standard polycarbonate for outdoor use.

PFA film retains its performance properties through a wide range of temperatures. It is often used to insulate cables.

Resistant to scratches and scuffs, mirrored acrylic is an economical alternative to mirrored polycarbonate.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.

More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.

Use these polyurethane balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. They are made of polyurethane, which combines the shock absorbing qualities of rubber with the strength of plastic.

These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.

Made of FDA-listed materials, these sheets and strips are for use with food.

Create a barrier against fire and smoke. These sheets and strips meet FAR 25.856 and UL 94 V-0 for flame retardance.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Seal and cushion corners with these 90° angles.

With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer.

Seal and cushion narrow spaces such as channels.

Stronger than standard high-temperature silicone rods, these rods are longer lasting and more shock absorbent.

Made from FDA-listed materials for use with food.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

Meeting transportation industry standards for flames, smoke, and toxicity, these neoprene sheets and strips are used as cushioning pads in panels to reduce vibration and noise.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

The cylindrical shape fits into channels and other narrow spaces for sealing and cushioning.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.

These small-diameter rods provide a seal in narrow spaces.

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.

Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

Contain, reinforce, separate, or protect materials with this stiff mesh. It is often used in ovens and dryers and can be used with food and beverages.