This material suppresses static charges to prevent dust from building up.

Made with carbon black, these recycled UHMW sheets are a sustainable alternative to standard UHMW sheets in applications where static electricity is a concern, such as in conveying equipment and chute liners.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Prolonged outdoor exposure won’t discolor or degrade VHMW.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

Use these cast nylon 6 rods to make sheaves, bushings, and pulleys. All withstand higher temperatures and are easier to machine than standard nylon 6/6 rods.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Often used for packaging and construction applications, this film is also known as Visqueen.

A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

Polyester resists swelling in wet environments.

These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Often used in assemblies that rub against each other, this powder blends into plastic, rubber, composites, and lubricants to keep them from sticking.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Often used as gaskets and bearings, this slippery-surface material absorbs virtually no moisture. PCTFE is equivalent to Kel-F and Neoflon.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

With a clear coating that provides protection from abrasion, UV light, and harsh cleaners, this polycarbonate is often used to create transit shelters and equipment shields.

The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.

Resistant to scratches and scuffs, mirrored acrylic is an economical alternative to mirrored polycarbonate.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.