Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

The most commonly used 3D printing material, these PLA filaments make detailed parts at a low melting point, so they won’t warp as they cool, rarely clog nozzles, and don’t require a heated printer bed.

Create circuit prototypes and other conductive pathways with these low-maintenance PLA filaments.

Stretchy, soft, and sturdy, these filaments make durable parts that resist wear and breakage despite repeated use. Stronger than ABS and PLA filaments, they create long-lasting, wear-resistant parts, such as seals, sleeves, and gaskets, as well as components that take on high-impact forces, such as springs and snap-fit parts.

Made of pliable TPU with a conductive compound, these filaments produce wire, circuits, and other components that direct the flow of electricity in wearable and flexible devices, from watches to grippers.

Bumps, scrapes, and falls won’t damage these tough filaments. Known for their durability, they absorb impact without cracking or breaking, and won’t degrade when heated. Use them to print tool handles, storage cases, and other parts that are handled or dropped frequently.

Create tool handles, tote trays, enclosures, and other parts that are banged or dropped often and used near sensitive electronics. These filaments are made of durable ABS or polycarbonate—roughly four times tougher than PLA—with a compound that diverts electrostatic discharges away from equipment.

Print tough, long-lasting parts that won’t scratch or wear out from constant motion and friction, such as gears, bearings, and washers.

Not only do parts printed from these filaments protect sensitive electronics, but they also hold their shape in temperatures that would deform or degrade most plastic. Use them to make parts for hot environments, such as engines, ovens, or lighting equipment.

Parts printed with these filaments absorb less moisture than other types of plastic, making them ideal for use in wet or humid environments.

Compatible with the MakerBot Replicator 2 Desktop 3D Printer and all Fifth Generation MakerBot Replicator 3D printers.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

This general purpose tubing is the industry standard for air and water applications.

Multiple colors allow you to color-code your lines for easy identification.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

Run chemicals through this tubing at temperatures between -450° F and 500° F.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

The smooth, nonabsorbing interior on this tubing resists material buildup, so it is easy to clean.

The industry standard for fuel and lubricant applications, this tubing can be used intermittently with petroleum-based products without becoming hard or brittle.