System of Measurement System of Measurement |
|---|
|
Shape Shape |
|---|
 |  |
| Foil | Sheet and Bar |
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Appearance Appearance |
|---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Certificate Certificate |
|---|
 | |
Tolerance Rating Tolerance Rating |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Specifications Met Specifications Met |
|---|
Hardness Rating Hardness Rating |
|---|
|
Hardness Hardness |
|---|
|
Fabrication Fabrication |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Yield Strength Yield Strength |
|---|
|
Elongation Elongation |
|---|
|
Mechanical Finish Mechanical Finish |
|---|
|
About Aluminum
More
About Perforated Sheets
More
Easy-to-Weld 5052 Aluminum Sheets and Bars
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Bars are saw cut to the widths and lengths listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Yield Strength: 23,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | 48" × 48" | |
| 0.032" | -0.003" to 0.003" | -300° to 300° | 000000000 | ||||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.062" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.100" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 000000000 | ||||||||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | ||||||||||
| 1/4" | -0.015" to 0.015" | -300° to 300° | 000000000 | ||||||||||
| 3/8" | -0.02" to 0.02" | -300° to 300° | 000000000 | ||||||||||
| 1/2" | -0.027" to 0.027" | -300° to 300° | 000000000 |
- Yield Strength: 28,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Width | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | -300° to 300° | 000000 | |||||
| 3/4" | -300° to 300° | 000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
1/4" Thick. (-0.015" to 0.015" Tolerance) | |||||||
| 1/2" | -300° to 300° | 0000000 | |||||
| 3/4" | -300° to 300° | 0000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
Polished Easy-to-Weld 5052 Aluminum Sheets and Bars
- Yield Strength: 20,000 psi
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective, peel-off film. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | |
Brushed | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Mirror-Like | |||||||||||
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Aluminum Perforated Sheets
Aluminum is lightweight. These sheets have good corrosion resistance, weldability, and formability.
Grade 5052 aluminum is more corrosion resistant than Grade 3003, and is good for use in saltwater environments. It’s also harder and stronger for greater wear resistance. It’s often used in storage tanks, pressure vessels, and marine applications.
24" × 24" | 48" × 48" | |||||
|---|---|---|---|---|---|---|
| Hole Dia. | Open Area | Hole Center-to-Center | Each | Each | ||
5052 Aluminum Sheets—Staggered Holes | ||||||
0.032" Thick. (20 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | 000000 | 0000000 | 0000000 |
| 0.0625" | 30% | 0.109" | 0000000 | 00000 | 0000000 | 000000 |
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.05" Thick. (16 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | 00000 | 0000000 | 000000 |
| 0.0625" | 30% | 0.109" | 0000000 | 00000 | 0000000 | 000000 |
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.063" Thick. (14 Gauge) | ||||||
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.125" Thick. (8 Gauge) | ||||||
| 0.125" | 40% | 0.188" | 0000000 | 000000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 000000 | 0000000 | 000000 |