Quick-Disconnect Shape Quick-Disconnect Shape |
|---|
 | Industrial |
 | ARO |
 | Tru-Flate |
 | European |
 | Lincoln |
Material Material |
|---|
|
Finish Finish |
|---|
|
Connection Style Connection Style |
|---|
 |
| Quick Disconnect |
 |
| Threaded |
 |
| Barbed |
Maximum Pressure Maximum Pressure |
|---|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
Attachment Type Attachment Type |
|---|
 |  |
| Crimp-On Hose Ferrule | Worm-Drive Clamp |
 | |
| Band-and- Buckle Clamp |
Specifications Met Specifications Met |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Industrial Quick-Disconnect Hose Couplings for Air
A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. They are also known as industrial interchange couplings. All Industrial plugs are compatible with any of the Industrial sockets of the same coupling size, regardless of the pipe size or barbed hose ID.
Plugs are also known as nipples. Plugs with swivel have a threaded pipe end that swivels 360° before and after installation as needed to prevent hose kinking. Plugs with swivel and 45° pivot angle have a threaded pipe end that rotates 360° and pivots 45° in all directions. They have a PTFE sealant on the threads for extra protection against leaks, and a chrome-plated steel dust cover on the rotating joint.
Plugs and sockets with a clamp-on/crimp-on barbed end insert into rubber hose and secure with a clamp or a crimp-on hose ferrule. Plugs and sockets with a push-on barbed end have sharper barbs than standard barbed hose fittings to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
Steel is stronger and more durable than other metals. Zinc-plated steel has fair corrosion resistance and should be used primarily in dry environments. Chrome-plated steel has fair corrosion resistance and has a bright, shiny appearance. Nickel-plated steel has good corrosion resistance. Brass is softer than other metals, so it’s easier to thread together. It has good corrosion resistance. 303 stainless steel has very good corrosion resistance, so it’s the best choice for high-humidity environments.
NPTF (Dryseal) threads are compatible with NPT threads.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Specifications Met: See table
Plug Tip | ||||||
|---|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | Pipe Size | Specifications Met | Each | |
Zinc-Plated Steel | ||||||
| 1/4 | 3/16" | 5/16" | 1/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 00000 |
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Nickel-Plated Steel | ||||||
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Brass | ||||||
| 1/4 | 3/16" | 5/16" | 1/8 | Fed. Spec. A-A-59439, ISO 6150/B | 00000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
303 Stainless Steel | ||||||
| 1/4 | 3/16" | 5/16" | 1/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Specifications Met: Fed. Spec. A-A-59439, ISO 6150/B, except 3/8 and 3/4 Coupling Size Plugs: ISO 6150/B
- Maximum Pressure: 145 psi @ 72° F
- Temperature Range: 20° to 140° F
- Specifications Met: Fed. Spec. A-A-59439, ISO 6150/B
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Specifications Met: Fed. Spec. A-A-59439, ISO 6150/B, except 3/8 Coupling Size Plugs: ISO 6150/B
Plug Tip | |||||
|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | Pipe Size | Each | |
Zinc-Plated Steel | |||||
| 1/4 | 3/16" | 5/16" | 1/4 | 0000000 | 00000 |
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Specifications Met: See table
Plug Tip | ||||||
|---|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | Pipe Size | Specifications Met | Each | |
Zinc-Plated Steel | ||||||
| 1/4 | 3/16" | 5/16" | 1/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 00000 |
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Nickel-Plated Steel | ||||||
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Brass | ||||||
| 1/4 | 3/16" | 5/16" | 1/8 | Fed. Spec. A-A-59439, ISO 6150/B | 00000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
303 Stainless Steel | ||||||
| 1/4 | 3/16" | 5/16" | 1/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 00000 |
| 1/4 | 3/16" | 5/16" | 1/4 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8 | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Specifications Met: Fed. Spec. A-A-59439, ISO 6150/B
Plug Tip | |||||
|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | Pipe Size | Each | |
Zinc-Plated Steel | |||||
| 1/4 | 3/16" | 5/16" | 1/4 | 0000000 | 00000 |
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Attachment Type: See table
- Specifications Met: See table
Plug Tip | |||||||
|---|---|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | For Hose ID | Attachment Type | Specifications Met | Each | |
Zinc-Plated Steel | |||||||
| 1/4 | 3/16" | 5/16" | 1/4" | Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 00000 |
| 1/4 | 3/16" | 5/16" | 5/16" | Worm-Drive Clamp, Band-and-Buckle Clamp | Fed. Spec. A-A-59439, ISO 6150/B | 00000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8" | Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Nickel-Plated Steel | |||||||
| 1/4 | 3/16" | 5/16" | 1/4" | Worm-Drive Clamp, Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8" | Worm-Drive Clamp, Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Brass | |||||||
| 1/4 | 3/16" | 5/16" | 1/4" | Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8" | Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
303 Stainless Steel | |||||||
| 1/4 | 3/16" | 5/16" | 1/4" | Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8" | Crimp-On Hose Ferrule | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Specifications Met: See table
Plug Tip | Ring Stop | |||||||
|---|---|---|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | For Hose ID | Material | Color | Specifications Met | Each | |
Zinc-Plated Steel | ||||||||
| 1/4 | 3/16" | 5/16" | 1/4" | Plastic | Yellow | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 00000 |
| 1/4 | 3/16" | 5/16" | 3/8" | Plastic | Yellow | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
Brass | ||||||||
| 1/4 | 3/16" | 5/16" | 1/4" | Plastic | Yellow | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
| 1/4 | 3/16" | 5/16" | 3/8" | Plastic | Yellow | Fed. Spec. A-A-59439, ISO 6150/B | 0000000 | 0000 |
ARO Quick-Disconnect Hose Couplings for Air
Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. All ARO plugs are compatible with any of the ARO sockets of the same coupling size, regardless of the pipe size or barbed hose ID.
Plugs are also known as nipples.
Plugs and sockets with a barbed end insert into plastic or rubber hose and secure with a clamp or a crimp-on hose ferrule.
Steel is stronger and more durable than other metals. Zinc-plated steel has fair corrosion resistance and should be used primarily in dry environments. 303 stainless steel has very good corrosion resistance, so it’s the best choice for high-humidity environments.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 300 psi @ 72° F
- Maximum Vacuum: 26 in. of Hg @ 72° F
- Temperature Range: -40° to 225° F
- Attachment Type: Use Worm-Drive Clamps or Crimp-On Hose Ferrules
Tru-Flate Quick-Disconnect Hose Couplings for Air
A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All Tru-Flate plugs are compatible with any of the Tru-Flate sockets of the same coupling size, regardless of the pipe size or barbed hose ID. They are also known as automotive couplings.
Plugs are also known as nipples.
Zinc-plated steel is stronger and more durable than other metals. It has fair corrosion resistance, so it should be used primarily in dry environments. NPTF (Dryseal) threads are compatible with NPT threads.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 300 psi @ 72° F
- Maximum Vacuum: See table
- Temperature Range: -40° to 225° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" Hose ID: Use Band-and-Buckle Clamps
European Quick-Disconnect Hose Couplings for Air
With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All European plugs are compatible with any of the European sockets, regardless of the pipe size or barbed hose ID.
Plugs are also known as nipples.
Plugs and sockets with a barbed end insert into plastic or rubber hose and secure with a clamp or a crimp-on hose ferrule.
Zinc-plated steel is strong and durable. It has fair corrosion resistance and should be used primarily in noncorrosive environments. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 230 psi @ 72° F
- Temperature Range: 0° to 212° F
- Attachment Type: Use Worm-Drive Clamps or Crimp-On Hose Ferrules
Lincoln Quick-Disconnect Hose Couplings for Air
A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All Lincoln plugs are compatible with any of the Lincoln sockets, regardless of the pipe size.
Plugs are also known as nipples.
Zinc-plated steel is stronger and more durable than other metals. It has fair corrosion resistance, so it should be used primarily in dry environments. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
