Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Receptacles for outlet boxes fit standard wall plates (not included).

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Receptacles fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Create a streamlined appearance—the flat face lies flush with your wall plate. Receptacles fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Suitable for use outdoors, these receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection. Internal shutters prevent the insertion of foreign objects and accidental contact with power. The housing is impact-resistant plastic.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. The housing is impact-resistant plastic.

Receptacles with internal shutters prevent the insertion of foreign objects and accidental contact with power. They fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Charge mobile devices without an adapter. Receptacles have two USB ports to connect smartphones and tablet computers. The NEMA slots have internal shutters to prevent the insertion of foreign objects and accidental contact with power. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Internal shutters prevent the insertion of foreign objects and accidental contact with power. Receptacles fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Reduce the likelihood of an electrical fire. Receptacles interrupt when an arc fault is detected. They have internal shutters to prevent the insertion of foreign objects and accidental contact with power. Install in a standard outlet box.

For technical drawings and 3-D models, click on a part number.

Prevent damage to electronic equipment caused by spikes in voltage. An indicating light turns green when receptacles have power and are protected. A flashing red light and an audible alarm indicate power but no surge protection. Receptacles provide an extra-tight fit when mated with a plug to remain secure in high-vibration environments. They're also known as hospital-grade receptacles. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Duplex receptacles fit standard wall plates (not included).

Quad receptacles have four outlets that are internally connected and can be wired as a single circuit or split into two circuits.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. Also known as hospital-grade receptacles, these have an extra-tight fit when mated with plugs to remain secure in high-vibration environments.

For technical drawings and 3-D models, click on a part number.

Push these connectors together to quickly create signal and data connections in tight spaces. They need less space to mate than screw-together connectors, which require two hands to twist them in place. However, screw-together connectors offer a more secure hold. These connectors have pin connections and a half-round or V-notched face for a snug fit that resists shock and vibration. Rated for over 2,000 mating cycles, the pins stand up to repeated connections and disconnections. Plugs can only mate with sockets of the same size, latch option, and pole count.

Connectors with a wire lead connection come with wire leads attached to save you time on installation.

Add latching clips to connectors without a built-in latch to secure your mated connections.

For technical drawings and 3-D models, click on a part number.

Give switches and outlets a finished look.

For technical drawings and 3-D models, click on a part number.

RJ11 jacks are primarily used in single-line telephone networks and with fax machines.

RJ12/RJ25 and RJ45 jacks are for multiline telephone networks and data networks.

Plates with a 110 punch-down wire connection are quicker to install than jacks with a screw terminal. They require a punch-down tool (sold separately).

Plates with a phone bracket connect and hold the telephone on a wall.