These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Use these dust caps and plugs to keep contaminants out of your hose line.

These receptacles are for light-duty use.

Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

Protect high-current connectors when not in use.

Lock Ethernet cords in place to prevent unauthorized removal from ports.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Connect devices such as computers, printers, and mobile devices.

Use these unshielded cords where signal interference is not a concern.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

No need to tighten or loosen any screws—these terminals lock your wiring in place with spring clamps.

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Protect internally threaded NPT connections from contaminants during fabrication and storage.

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Protect externally threaded components from contaminants during fabrication and storage.

Stretch these caps over flared edges such as flanged tubing and valve handles.

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Adapt Fluke test leads to perform electrical tests in tight spaces.

Choose your own combination of test lead tips and cords.

Replace a test lead or complete a set with a red or black lead.

Hook up electrical testing equipment and create test circuits.

By converting a BNC connector to a double banana connector, you can perform electrical tests with a multimeter or other test equipment that accepts banana connectors.