Email Us

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Guard the corners of fragile materials such as glass and mirrors.

Stretch these caps over flared edges such as flanged tubing and valve handles.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Use these connectors in general purpose residential and commercial applications.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

These connectors are often used with 18 mm and 30 mm proximity switches and limit switches.

Screw these connectors together for a more secure connection than push-in connectors.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Often used with 12 mm proximity switches, console lights, and valves.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

Use these mini cords to carry higher currents than nano or micro cords.

Change the connection style between an outlet and your equipment.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

Designed for indoor use, these cords are often used to power appliances.

Keep personnel safe from electric shock with these cords.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Keep personnel safe from electric shock with these cords.

Attach these splitters to an extension cord to power multiple devices from one cord.

Keep personnel safe from electric shock with ground fault protection.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

The shielding blocks signal interference from nearby equipment and devices.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

Connect computers, servers, and switches in a fiber-optic network.

Use with DIN 3 and DIN 1 rail. Add as many circuits as you need with these terminal blocks and accessories.

Protect your hearing in loud environments.