Type Type |
|---|
 | Cap |
Material Material |
|---|
|
Shape Shape |
|---|
 | Cap/Plug |
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Connection Style Connection Style |
|---|
 | Socket Connect |
Connection Type Connection Type |
|---|
 | Pipe |
Environment Environment |
|---|
|
Gender Gender |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
O-Ring Material O-Ring Material |
|---|
|
Socket Connect Type Socket Connect Type |
|---|
 | Press |
Specifications Met Specifications Met |
|---|
|
For Pipe Material For Pipe Material |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Press-Connect Stainless
Steel Unthreaded Pipe Fittings
- For Use With:
304 Stainless Steel: Air, Ethylene Glycol, Propylene Glycol, Water, Diesel Fuel, Fuel Oil
316 Stainless Steel: Drinking Water, Isopropyl Alcohol, Nitric Acid (10%), Phosphoric Acid (25%), Deionized Water, Anhydrous Ammonia - Maximum Pressure:
304 Stainless Steel: 125 psi @ 72° F
316 Stainless Steel: 200 psi @ 72° F - Specifications Met:
304 Stainelss Steel: ANSI/ASME B31, Uniform Mechanical Code, Uniform Plumbing Code
316 Stainless Steel: ANSI/ASME B31, NSF/ANSI 61, NSF/ANSI 372, Uniform Mechanical Code, Uniform Plumbing Code - O-Ring Material:
304 Stainless Steel: Fluoroelastomer Rubber
316 Stainless Steel: EPDM Rubber - Pipe Nipples and Pipe: Use Schedule 10, 40 Stainless Steel
- Flanges: Use Class 150 Stainless Steel
Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat. Fittings have an internal stainless steel gripping ring and rubber O-ring that create a seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These fittings are comparable to Viega MegaPress fittings.
Fittings comply with the Uniform Plumbing Code for plumbing systems and the Uniform Mechanical Code for HVAC and refrigeration. They also meet ANSI/ASME B31 code requirements for use in pressure piping systems.
316 stainless steel fittings stand up to harsh environments with constant exposure to chemical solutions. They meet NSF/ANSI Standard 61 for use with drinking water, and are often found on water and chemical processing lines in corrosive environments.
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
| Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 2 | Yes | 45 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |