Use these corrosion-resistant fittings in a low-pressure pipe line.

The male threads on these fittings have a sealant applied for extra leak protection.

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Also known as Code 61 SAE hydraulic flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

Also known as luer lock couplings, these consist of a plug and socket that connect with a half turn. Use in low-pressure applications up to 30 psi.

Twist these fittings onto high-vacuum tubing to quickly make sealed, high-vacuum connections without the need for clamping, welding, or tools.

For high-vacuum systems with tube sizes too large for quick-clamp (KF) fittings, choose these bolt-together fittings.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Compatible with ARO-shape plugs and sockets.

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, push the plug into the socket. The compact design makes these couplings sleeker and easier to handle than cam-and-groove garden hose couplings.

Protect harsh environment M12 connectors when not in use.

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

More durable than plastic caps, these provide the most protection from abrasion and impact.

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

FDA compliant for use near food, these plugs close off unused holes in equipment such as electrical enclosures to keep out debris and water.

Sized for 22 mm and 30 mm push-button holes.

Give switches and outlets a finished look.

Keep switches and outlets under cover for protection from dust and dirt. These stainless steel plates resist corrosion and have a sealing gasket to keep out moisture.

These grips are the most corrosion resistant of any of our submersible metal cord grips.

The mesh offers a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life.

Stainless steel construction offers the most corrosion-resistance of any of our multi-diameter wet-location cord grips.

FDA compliant for direct food contact, these cord grips have a multi-piece design to wrap around cables in sanitary environments without removing connectors or rewiring.

Seal out contaminants and prevent leaks—a rubber O-ring under the head prevents leaks and seals out contaminants.

Bolt down equipment in food processing or sanitary areas while sealing out contaminants.

These metric screws have a silicone O-ring that prevents leaks and seals out contaminants. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

To prevent unwanted removal, these screws have a tamper-resistant Torx drive—also known as a pin-in Torx drive—that makes them difficult to unscrew without special tools. An O-ring under the head blocks leaks and seals out dust and dirt.

To prevent leaks and seal out contaminants, these metric screws have an O-ring under the head.

Prevent unwanted removal, leaks, and contamination with these sealing Torx screws.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Made from 18-8 stainless steel, these screws are chemical resistant.

Use a screwdriver to install these receptacles in a threaded hole.

These female snap halves create the finished button-look of a snap. Pair them with male snap halves to create a complete snap.

Male and female snaps are included to create complete snaps.

These sights have a glass window.

With a thick glass window fused to a metal body, these sights resist cracking at high pressures.

Mount these sights from the inside of your tank and secure with a lock nut.

Monitor food, brewery, chemical, pharmaceutical, and biotech processing lines with these sights that attach to quick-clamp fittings for fast installation and easy removal for cleaning.

Inject lubricant into motors, bearings, engine blocks, and all kinds of machinery.

Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won't pop off when adding grease.

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.

Install these plugs into drum holes using a drum-plug wrench.