Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Use these connectors in general purpose residential and commercial applications.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

A rubber housing protects these connectors from damage caused by drops and impact.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

Meet international standards IEC 309-1 and 309-2.

Assemble a connector that can handle multiple applications at once. Combine inserts that send power, signal, and data with a base and a hood.

Build a connector that fits in tight spaces by combining male and female inserts for power and signal with a compact base and a hood.

Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.

The smallest latching connectors we offer, these fit in tight spaces. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Send power and signal to devices with M12 connections that are exposed to some of the toughest industrial stresses—from welding to metal machining and changing temperatures.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Visually confirm your connector is working properly. A green light means your connector has power, while yellow means it has signal.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

Rated IP69K, these M16 connectors protect against dust, debris, and hot, high-pressure jets of water at high volumes.

Minimize signal loss between low-current devices with M8 connections.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. Use them with standard Molex connectors.

Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

Connectors lock into place for a secure connection in high-vibration environments. They power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Choose a socket that works with your Siemens servomotor system.

Reduce the likelihood of slips and falls in high-traffic areas—connectors won't roll when stepped on.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Make secure connections with machine tools, robots, and other equipment that vibrates frequently and carries currents as high as 300 amps.

Connect one end to a fixture and the other to a ballast. These connectors allow you to safely disconnect a failed ballast without exposing you to live wires.

Deliver power to welding cable. These connectors withstand the high temperatures and high current found in welding applications.

Reduce the number of electrical connections in sanitary areas, such as food plants—these connectors combine Ethernet, a power cable, and wire for signals into a single connection point.

Replace damaged connectors on lighting cables that are commonly used for movie and stage lighting, as well as interior building lighting.

Install these connectors in a panel cutout to create a port for transferring data.

A threaded M8 end on these connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords.

These connectors allow you to connect USB devices to a circuit board.

Add ix Industrial connections to printed circuit boards (PCBs).

Add a D-sub connection to a printed circuit board (PCB). These connectors are often used in applications involving monitoring, control, and communication.

With a ferrite filter block surrounding their contacts, these connectors control and reduce the electromagnetic (EMI) and radio frequency (RFI) interference traveling through them.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Audio/video HDMI connectors and cords are rated IP67 when mated.

These connectors are designed for use in audio equipment.

Mount these connectors in a panel cutout.

One of the connections on these terminal blocks is a socket instead of a traditional terminal, making it easy to swap out equipment or change your wiring even in small enclosures. Instead of having to attach wire inside the tight space of your enclosure, you can wire a connector wherever it’s easiest and then plug it into the socket.