McMaster-Carr

				Max. Pressure, psi
Mfr. Model No.	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Color		Each
3M PTFE
0.003" Thick.
547	1/4"	36	Not Rated	Not Rated	Not Rated	-40° to 170°	6"	White	0000000	000000
547	3/8"	36	Not Rated	Not Rated	Not Rated	-40° to 170°	6"	White	0000000	00000
547	1/2"	36	Not Rated	Not Rated	Not Rated	-40° to 170°	6"	White	0000000	00000
547	3/4"	36	Not Rated	Not Rated	Not Rated	-40° to 170°	6"	White	0000000	00000
547	1"	36	Not Rated	Not Rated	Not Rated	-40° to 170°	6"	White	0000000	00000

			Max. Pressure, psi							Each
Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Specifications Met	Color		1-11	12-Up
PTFE
0.0032" Thick.
1/4"	14	0.7	10,000	10,000	-450° to 550°	1/2"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	00000	00000
3/8"	14	0.7	10,000	10,000	-450° to 550°	3/4"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	0000	0000
1/2"	14	0.7	10,000	10,000	-450° to 550°	1"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	0000	0000
3/4"	14	0.7	10,000	10,000	-450° to 550°	1 1/2"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	0000	0000
1"	14	0.7	10,000	10,000	-450° to 550°	2"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	0000	0000
1 1/2"	14	0.7	10,000	10,000	-450° to 550°	3"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	0000	0000
2"	14	0.7	10,000	10,000	-450° to 550°	4"	FDA Compliant 21 CFR 177.1550, MIL-T-27730A, UL Listed	White	0000000	00000	0000

High-Density Thread Sealant Tape

This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

				Max. Pressure, psi
Mfr. Model No.	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Color		Each
3M PTFE
0.003" Thick.
48	1/4"	7	1.3	Not Rated	Not Rated	-450° to 400°	6"	White	0000000	00000
48	1/2"	7	1.3	Not Rated	Not Rated	-450° to 400°	6"	White	0000000	0000

			Max. Pressure, psi							Each
Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Specifications Met	Color		1-11	12-Up
PTFE
0.0032" Thick.
1/4"	14	1.2	10,000	10,000	-450° to 550°	1/2"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	00000	00000
1/4"	14	1.2	10,000	10,000	-450° to 550°	1/2"	MIL-A-A-58092 MIL-T-27730A UL Listed	Gray	0000000	0000	0000
3/8"	14	1.2	10,000	10,000	-450° to 550°	3/4"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	0000	0000
3/8"	14	1.2	10,000	10,000	-450° to 550°	3/4"	MIL-A-A-58092 MIL-T-27730A UL Listed	Gray	0000000	0000	0000
1/2"	14	1.2	10,000	10,000	-450° to 550°	1"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	0000	0000
1/2"	14	1.2	10,000	10,000	-450° to 550°	1"	MIL-A-A-58092 MIL-T-27730A UL Listed	Gray	0000000	0000	0000
3/4"	14	1.2	10,000	10,000	-450° to 550°	1 1/2"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	0000	0000
3/4"	14	1.2	10,000	10,000	-450° to 550°	1 1/2"	MIL-A-A-58092 MIL-T-27730A UL Listed	Gray	0000000	0000	0000
1"	14	1.2	10,000	10,000	-450° to 550°	2"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	0000	0000
1"	14	1.2	10,000	10,000	-450° to 550°	2"	MIL-A-A-58092 MIL-T-27730A UL Listed	Gray	0000000	0000	0000
1 1/2"	14	1.2	10,000	10,000	-450° to 550°	3"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	00000	00000
1 1/2"	14	1.2	10,000	10,000	-450° to 550°	3"	MIL-A-A-58092 MIL-T-27730A UL Listed	Gray	0000000	00000	00000
2"	14	1.2	10,000	10,000	-450° to 550°	4"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 177.1550 UL Listed	White	0000000	00000	00000
0.0035" Thick.
1/4"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	0000	0000
3/8"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	0000	0000
1/2"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	0000
3/4"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
1"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
1 1/2"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
2"	14	1.9	10,000	10,800	-450° to 550°	6"	MIL-A-A-58092 MIL-T-27730A FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000

			Max. Pressure, psi							Each
Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Specifications Met	Color		1-11	12-Up
PTFE with Nickel Filler
0.004" Thick.
1/4"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	000000	000000
3/8"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
1/2"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
3/4"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
1"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
1 1/2"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000
2"	14	1.9	10,500	11,500	-450° to 550°	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed	White	0000000	00000	00000

Choose-a-Color High-Density Thread Sealant Tape

Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

			Max. Pressue, psi							Each
Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Specifications Met	Choose a Color		1-11	12-Up
PTFE
0.0032" Thick.
1/4"	14	1.2	10,000	10,000	-450° to 550°	1/2"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	00000	00000
3/8"	14	1.2	10,000	10,000	-450° to 550°	3/4"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	0000	0000
1/2"	14	1.2	10,000	10,000	-450° to 550°	1"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	0000	0000
3/4"	14	1.2	10,000	10,000	-450° to 550°	1 1/2"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	0000	0000
1"	14	1.2	10,000	10,000	-450° to 550°	2"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	0000	0000
1 1/2"	14	1.2	10,000	10,000	-450° to 550°	3"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	00000	00000
2"	14	1.2	10,000	10,000	-450° to 550°	4"	MIL-A-A-58092 MIL-T-27730A UL Listed	Green, Orange, Red, Yellow	00000000	00000	00000

Thread Sealant Tape for Stainless Steel Threads

This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

			Max. Pressure, psi							Each
Wd.	Lg., ft.	Density, g/cm³	For Fluids	For Gases	Temp. Range, °F	For Max. Thread Dia.	Specifications Met	Color		1-11	12-Up
PTFE with Nickel
0.0043" Thick.
1/4"	43	1.05	10,000	10,000	-450° to 550°	1 1/2"	MIL-T-27730A UL Listed	Gray	0000000	00000	00000
3/8"	43	1.05	10,000	10,000	-450° to 550°	1 1/2"	MIL-T-27730A UL Listed	Gray	0000000	0000	0000
1/2"	50	1.05	10,000	10,000	-450° to 550°	1 1/2"	MIL-T-27730A UL Listed	Gray	0000000	0000	0000
3/4"	21	1.05	10,000	10,000	-450° to 550°	1 1/2"	MIL-T-27730A UL Listed	Gray	0000000	0000	0000
1"	43	1.05	10,000	10,000	-450° to 550°	1 1/2"	MIL-T-27730A UL Listed	Gray	0000000	00000	00000
1 1/2"	43	1.05	10,000	10,000	-450° to 550°	1 1/2"	MIL-T-27730A UL Listed	Gray	0000000	00000	00000

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Perforated straps have mounting holes, so there’s no need for drilling. Straps that have two mounting-hole diameters have alternately spaced large and small mounting holes.

Solid straps allow you to drill your own mounting holes.

Zinc-plated steel straps have good corrosion resistance. Copper-plated steel straps resist corrosion when used with copper tubing. 304 stainless steel straps have excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Perforated

		Mounting Hole		10ft.		100ft.
Wd.	Thick.	Ctr.-to-Ctr.	Dia.		Each		Each
Zinc-Plated Steel
3/4"	1/32"	1/2"	1/8", 1/4"	0000000	00000	0000000	000000
3/4"	3/64"	1/2"	1/8", 1/4"	0000000	0000	0000000	00000
Copper-Plated Steel
3/4"	1/32"	1/2"	3/16", 1/4"	0000000	0000	0000000	00000
304 Stainless Steel
3/4"	1/32"	1/2"	3/16", 1/4"	0000000	0000	0000000	00000
3/4"	3/64"	1/2"	3/16", 1/4"	0000000	00000	0000000	000000

Solid

		10ft.		100ft.
Wd.	Thick.		Each		Each
Zinc-Plated Steel
1"	1/32"	0000000	00000	0000000	000000
1"	3/64"	0000000	0000	0000000	00000
304 Stainless Steel
1"	1/32"	0000000	00000	0000000	00000
1"	3/64"	0000000	00000	0000000	000000

Hook-Mount Hangers

A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height. Straps are polypropylene to prevent scratching on soft pipe and tubing. D-rings are galvanized steel for good corrosion resistance.

Hook		Strap
Opening Wd.	Ht.	Wd.	Lg.	Thick.	Material	Color	Cap., lbs.		Each
Galvanized Steel
1/2"	2 3/4"	1 1/2"	3ft.	1/16"	Polypropylene Plastic	Orange	140	0000000	00000

Water-Activated Fiberglass Repair Tape

When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs. It works on metal, plastic, rubber, and fiberglass, and can be sanded and painted when dry. This tape can also be used to repair pipes.

Tape with both polyurethane and silicone adhesive can be used at temperatures up to 850 °F.

Polyurethane Adhesive
Wd.	Lg., ft.	Overall Thick.	Facing Material	Temperature Range, °F	Max. Pressure, psi	Tensile Strength, lbs./in. wd.	Adhesion to Steel	Includes	Color		Each
1"	2 1/2	0.014"	Resin	45° to 600°	150	Not Rated	Not Rated	Plastic Gloves	Off-White	00000000	000000
2"	4	0.015"	Resin	0° to 400°	500	Not Rated	Not Rated	Epoxy Putty Stick, Plastic Gloves	White	00000000	00000
2"	5	0.014"	Resin	45° to 600°	150	Not Rated	Not Rated	Plastic Gloves	Off-White	00000000	00000
3"	9	0.014"	Resin	45° to 600°	150	Not Rated	Not Rated	Plastic Gloves	Off-White	00000000	00000
4"	15	0.014"	Resin	45° to 600°	150	Not Rated	Not Rated	Plastic Gloves	Off-White	00000000	00000
Polyurethane and Silicone Adhesive
2"	5 3/4	0.01"	Resin	-30° to 850°	60	2,000	Not Rated	Plastic Gloves	Brown	00000000	00000

Dissolvable Repair Tape for Pipes

Create dams in pipes before welding, then wash away with water or steam. This tape leaves no residue behind.

Wd.	Lg., ft.	Overall Thick.	Material	Adhesive Type	Temperature Range, °F	Tensile Strength, lbs./in. wd.	Adhesion to Steel	Color		Each
1"	300	0.0062"	Paper	Acrylic	20° to 150°	20	Not Rated	White	000000	000000
2"	300	0.0062"	Paper	Acrylic	20° to 150°	20	Not Rated	White	000000	000000

Terms and Conditions and Privacy Policy