Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Made from slippery materials, these bearings reduce friction without the oily mess.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Use these UHMW bearings in wet, corrosive environments.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

A bolt in each corner makes for a secure, even hold.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.