Retract the nose by pulling the knob.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Install by hand or with a hex key in low-clearance applications.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

Add a knob or handle to the threaded shank.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Install with a hex key for more torque than slotted long-nose spring plungers.

A flange keeps the plunger from being pushed through a hole when the ball is depressed.

These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers.

Install these spring plungers with a screwdriver—they're slotted on one or both ends.

Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.

Weld these catches in place for a strong permanent hold.

As the face of these plungers is pushed in, the internal spring applies outward pressure to hold a workpiece in position against stops and rails.

Thread in a screw, handle, or other part to create the right size and shape guide pin for your application.

Threading makes these guide pins easier to remove and replace than press fit, so they're useful for high-wear applications.