Pocket Pull Handles | McMaster-Carr

Filter by

Material

Handle Style

Mount Type

Unthreaded Through Hole

Color

System of Measurement

Panel Thickness

Width

Mounting Screw Material

Stainless Steel

Steel

Zinc

Panel Cutout Width

Back Projection

Height

Mounting Plate Width

Panel Cutout Height

Mounting Screw Size

Finish

Projection

Grip Style

Number of Mounting Holes

Pull Capacity

Thread Size

Mounting Plate Height

Grip Material

RoHS

DFARS Specialty Metals

Exempt

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

71 Products

Unthreaded Through-Hole-Mount Recessed Pull Handles


Style 1	Style 2	Style 3	Style 4

Style 5	Style 6	Style 7

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.

304 Stainless Steel and 316 Stainless Steel—Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Plastic—Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.

Powder-Coated Steel and Zinc-Plated Steel—Steel knobs are stronger than iron. They are plated or coated for rust resistance.

					For Panel Cutout				Mounting Screw			Temp., ° F
	No. of Mounting Holes	Ht.	Wd.	Back Projection	Dia.	Ht.	Wd.	Pull Cap.	Size	Lg.	Mounting Fasteners Included	Min.	Max.		Each
Style 1







				Black Plastic

				4	2 3/16"	2 3/16"	5/8"	1.68"	—	—	Not Rated	No. 6	—	No	-30	280	00000000	00000


				Style 2







								Black Plastic

								4	3 5/8"	2 3/8"	11/16"	—	3.06"	1.68"	Not Rated	No. 6	—	No	-30	280	00000000	0000




										Gray Plastic

										4	3 5/8"	2 3/8"	11/16"	—	3.06"	1.68"	Not Rated	No. 6	—	No	-30	280	00000000	0000




												White Plastic

												4	3 5/8"	2 3/8"	11/16"	—	3.06"	1.68"	Not Rated	No. 6	—	No	-30	280	00000000	0000


												Style 3







																Zinc-Plated Steel—Dull

																2	3 1/4"	1 3/4"	9/16"	—	2.25"	0.91"	Not Rated	No. 4	1/2"	Yes	—	—	000000	00000


																Style 4







																				Beige Powder-Coated Steel

																				4	6"	4"	7/8"	—	3.63"	2"	Not Rated	3/8", No. 12	1 1/4", 1 1/2"	Yes	—	—	000000	00000




																				Zinc-Plated Steel—Dull

		4																		6"	4"	7/8"	—	3.63"	2"	Not Rated	3/8", No. 12	1 1/4", 1 1/2"	Yes	—	—	0000000	00000


		Style 5







																				304 Stainless Steel—Dull

																				4	5"	3 1/2"	7/8"	—	3.13"	1.75"	Not Rated	No. 8	3/4"	Yes	—	—	0000000	00000




																				316 Stainless Steel—Dull

																				4	5"	3 1/2"	7/8"	—	3.13"	1.75"	Not Rated	No. 8	3/4"	Yes	—	—	0000000	00000


								Style 6







																				Black Powder-Coated Steel

																				4	5 1/4"	3 3/8"	7/8"	—	3.81"	2.81"	Not Rated	No. 10	1 1/4"	Yes	—	—	0000000	000000


																				Style 7







																				Beige Powder-Coated Iron

																				4	6 3/4"	5 1/8"	1 11/16"	—	4.88"	4.13"	Not Rated	5/16"	—	No	—	—	000000	00000

Threaded-Hole-Mount Recessed Pull Handles


304 Stainless Steel	304 Stainless Steel	ABS	ABS

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they're flush with the mounting surface.

304 Stainless Steel—Stainless steel handles have excellent corrosion resistance and good chemical resistance. They have two threaded mounting holes.

ABS—ABS handles are a lightweight alternative to metal. They resist oil, grease, and solvents. Use the included tap screws to form mounting holes on these handles.

					For Panel Cutout, mm				Mounting Screw
No. of Mounting Holes	Ht., mm	Wd., mm	Thread Dp., mm	Back Projection, mm	Ht.	Wd.	For Panel Thk., mm	Pull Cap.	Size	Lg., mm	Mounting Fasteners Included		Each







			304 Stainless Steel—Dull

			2	122	60	6	16	90	40	3.2 to 12.7	Not Rated	M4 × 0.7 mm	25	Yes	000000	00000




					Black ABS

					2	123	46.7	—	25	114	38	1 to 1.8	Not Rated	No. 6	22	Yes	0000000	0000


					2	123	46.7	—	25	114	38	1.8 to 3.3	Not Rated	No. 6	22	Yes	0000000	0000
					2	123	46.7	—	25	114	38	3.3 to 4.8	Not Rated	No. 6	22	Yes	0000000	0000
					2	123	46.7	—	25	114	38	4.8 to 6.3	Not Rated	No. 6	22	Yes	0000000	0000

Snap-In Recessed Pull Handles


Style A (Front)	Style A (Back)	Style B (Front)	Style B (Back)


Black	Off-White

Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of plastic, all of these handles resist oil, grease, and solvents.

				For Panel Cutout
	Ht.	Wd.	Back Projection	Ht.	Wd.	For Panel Thk.		Each
Style A







				Black Plastic

				1"	3 15/16"	11/16"	0.85"	3.827"	0.03"	0000000	00000


				1 7/16"	3 11/16"	11/16"	1.21"	3.45"	0.04" to 0.055"	0000000	0000
				1 7/16"	3 11/16"	11/16"	1.21"	3.45"	0.055" to 0.07"	0000000	0000
				1 7/16"	3 11/16"	11/16"	1.21"	3.45"	0.07" to 0.085"	0000000	0000
				1 7/16"	3 11/16"	11/16"	1.21"	3.45"	0.085" to 0.1"	0000000	0000
				1 7/16"	5 7/16"	11/16"	1.21"	5.2"	0.04" to 0.055"	0000000	0000
				1 7/16"	5 7/16"	11/16"	1.21"	5.2"	0.055" to 0.07"	0000000	0000
				1 7/16"	5 7/16"	11/16"	1.21"	5.2"	0.07" to 0.085"	0000000	0000
				1 7/16"	5 7/16"	11/16"	1.21"	5.2"	0.085" to 0.1"	0000000	0000
				1 1/2"	2 3/4"	11/16"	1.283"	2.587"	0.03"	0000000	0000
				1 3/4"	3 15/16"	7/8"	1.575"	3.791"	0.03"	0000000	0000


				Style B







								Black Plastic

								1 1/2"	2 3/4"	9/16"	1.13" to 1.213"	1.811"	0.02" to 0.125"	0000000	0000


								1 3/4"	3 9/16"	9/16"	1.366" to 1.449"	2.6"	0.02" to 0.125"	0000000	0000
								2"	4 5/16"	9/16"	1.602" to 1.685"	3.464"	0.02" to 0.125"	0000000	0000
								2 1/2"	5 1/2"	9/16"	2.154" to 2.236"	4.488"	0.02" to 0.125"	0000000	0000




										Off-White Plastic

										2"	4 5/16"	9/16"	1.602" to 1.685"	3.464"	0.02" to 0.125"	0000000	0000


										2 1/2"	5 1/2"	9/16"	2.154" to 2.236"	4.488"	0.02" to 0.125"	0000000	0000

Threaded-Stud-Mount Recessed Pull Handles


Style 1	Style 2	Style 3

Style 4	Style 5

Insert studs into holes in your surface and fasten with locknuts from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. This handle fits into a cutout, so it's flush with the mounting surface. Made of stainless steel it has excellent corrosion resistance and good chemical resistance.

			Thread			For Panel Cutout, mm
	Ht., mm	Wd., mm	Size	Lg., mm	Back Projection, mm	Ht.	Wd.	Pull Cap.	Mounting Fasteners Included		Each
Style 1







				304 Stainless Steel—Dull

				122	62	M5 × 0.8 mm	10	16	90	40	Not Rated	Yes	000000	00000


				Style 2







								304 Stainless Steel—Dull

								120	60	M4 × 0.7 mm	10	14	91	45	Not Rated	Yes	0000000	0000


								Style 3







												304 Stainless Steel—Dull

												152	114	M5 × 0.8 mm	10	50	115	98	Not Rated	Yes	0000000	00000


												Style 4







																304 Stainless Steel—Dull

																94	60	M4 × 0.7 mm	9	12	63	45	Not Rated	Yes	0000000	00000


																109	64	M4 × 0.7 mm	9	14	73	42	Not Rated	Yes	0000000	00000
																138	88	M4 × 0.7 mm	9	21	99	64	Not Rated	Yes	0000000	00000




																		304 Stainless Steel—Polished

																		94	60	M4 × 0.7 mm	9	12	63	45	Not Rated	Yes	0000000	00000


																		109	64	M4 × 0.7 mm	9	14	73	42	Not Rated	Yes	0000000	00000
																		138	88	M4 × 0.7 mm	9	21	99	64	Not Rated	Yes	0000000	00000


Style 5







																		304 Stainless Steel—Dull

																		153	135	M5 × 0.8 mm	8	35	108	107	Not Rated	Yes	0000000	00000

Unthreaded Through-Hole-Mount Recessed Folding Pull Handles with Mounting Plate


Style 1	Style 2	Style 3

Style 4	Style 5	Style 6

Style 7	Style 8	Style 9

Style 10

Fasten these handles directly to the front of your surface. They fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Styles 5 and 6—Style 5 and 6 handles have a spring-loaded hinge that keeps the grip flush with the mounting plate and prevents rattling when it's not in use.

Oval Grip—Oval grips conform to your hand and offer more control than round grips.

Rectangular Grip—Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.

Round Grip—Round grips allow your hand to pivot in any direction.

Brass and Chrome-Plated Brass—Brass and chrome-plated brass handles have good corrosion resistance and are nonmagnetic.

Epoxy-Coated Steel and Zinc-Plated Steel—Steel handles are plated or coated for rust resistance.

			Grip						For Panel Cutout				Mounting Screw		Mounting Plate					Temp., ° F			Each
	Folding Angle	No. of Mounting Holes	Dia.	Ht.	Thk.	Handle Wd.	Projection	Back Projection	Dia.	Ht.	Wd.	Pull Cap.	Size	Lg.	Dia.	Ht.	Wd.	Thk.	Mounting Fasteners Included	Min.	Max.		1-24	25-99	100-Up
Style 1—Round Grip







				304 Stainless Steel—Polished

				110°	3	1/4"	—	—	1 7/8"	1 3/16"	3/8"	—	2 1/4"	2 3/8"	Not Rated	1/4"	—	—	5"	3 1/2"	3/32"	No	—	—	0000000	000000	000000	000000




						Zinc-Plated Steel—Dull

						110°	3	1/4"	—	—	1 7/8"	1 3/16"	3/8"	—	2 1/4"	2 3/8"	Not Rated	1/4"	—	—	5"	3 1/2"	3/32"	No	—	—	0000000	0000	0000	0000


						Style 2—Round Grip







										Zinc-Plated Steel—Polished

										110°	4	5/16"	—	—	1 1/2"	2"	7/16"	—	2 3/4"	2 1/4"	Not Rated	No. 7	3/4"	—	3 1/2"	3"	1/16"	Yes	—	—	0000000	00000	0000	0000


										Style 3—Oval Grip







														304 Stainless Steel—Polished

														90°	4	—	1/8"	3/16"	11/16"	1"	7/16"	—	1 3/8"	1 1/16"	Not Rated	No. 6	—	—	1 3/4"	1 1/2"	1/32"	No	—	—	00000000	00000	0000	0000


														90°	4	—	1/4"	1/4"	1 1/16"	1 1/2"	7/16"	—	1 13/16"	1 1/2"	Not Rated	No. 8	—	—	2 9/16"	2 3/16"	1/32"	No	—	—	00000000	00000	00000	0000


														Style 4—Oval Grip







																		316 Stainless Steel—Polished

																		90°	4	—	1/8"	1/8"	3/4"	1 1/16"	3/8"	—	1 3/8"	1 1/8"	Not Rated	No. 8	—	—	1 15/16"	1 9/16"	1/8"	No	—	—	00000000	00000	00000	00000




																				Brass—Polished

90°	4																			—	1/8"	1/8"	1 1/16"	1 1/2"	3/16"	—	2 3/16"	1 11/16"	Not Rated	No. 8	—	—	2 1/2"	2"	1/8"	No	—	—	00000000	00000	00000	00000




		Chrome-Plated Brass—Polished

		90°	4																	—	1/8"	1/8"	3/4"	1 1/8"	3/8"	—	1 3/8"	1 5/16"	Not Rated	No. 6	—	—	1 7/8"	1 9/16"	1/8"	No	—	—	00000000	00000	00000	00000


		90°	4																	—	1/8"	1/8"	1 1/16"	1 1/2"	3/16"	—	2 1/8"	1 11/16"	Not Rated	No. 8	—	—	2 1/2"	2"	1/8"	No	—	—	00000000	00000	00000	00000


		Style 5—Rectangular Grip with Spring-Loaded Hinge







						304 Stainless Steel—Polished

						90°	4													—	1/4"	1/4"	1 11/16"	1 5/16"	15/32"	—	1 3/4"	2 5/16"	Not Rated	No. 8	—	—	2 1/4"	3"	1/32"	No	—	—	00000000	00000	00000	0000


						Style 6—Round Grip with Spring-Loaded Hinge







																				Zinc-Plated Steel with Rubber Grip—Dull

										90°										8	7/16"	—	—	4 5/16"	2 5/8"	3/8"	—	3 1/8"	5 1/4"	Not Rated	No. 10	—	—	4"	6 1/8"	1/16"	No	-40	240	00000000	0000	0000	0000


										90°	14									3/4"	—	—	4 3/4"	3"	5/8"	—	3 3/4"	5 3/4"	Not Rated	No. 10	—	—	5"	7"	1/16"	No	-40	240	00000000	00000	00000	0000




												Black Epoxy-Coated Steel with Rubber Grip—Dull

												90°	14							3/4"	—	—	4 3/4"	3"	5/8"	—	3 3/4"	5 3/4"	Not Rated	No. 10	—	—	5"	7"	1/16"	No	-40	240	00000000	00000	00000	00000


												Style 7—Round Grip







																				Zinc-Plated Steel—Dull

																150°				2	1/4"	—	—	1 1/4"	1 7/8"	1/4"	3"	—	—	Not Rated	1/4"	—	3 1/2"	—	—	1/16"	No	—	—	0000000	0000	0000	0000


																Style 8—Rectangular Grip







																		Chrome-Plated Brass—Polished

																		90°	4	—	5/16"	5/16"	1 11/16"	1 3/16"	5/16"	—	1 3/4"	2 7/16"	Not Rated	No. 8	—	—	2 3/16"	2 15/16"	1/16"	No	—	—	00000000	00000	00000	00000


																		Style 9—Oval Grip







				316 Stainless Steel—Polished

				90°	4															—	1/4"	1/4"	2 3/8"	1 1/4"	1/4"	—	1 3/4"	2 5/8"	Not Rated	No. 8	—	—	2 1/8"	3"	1/16"	No	—	—	00000000	00000	00000	00000


				Style 10—Oval Grip







																				Brass—Polished

								90°												3	—	1/8"	1/8"	3/4"	1 1/16"	3/8"	—	1 3/8"	1 1/4"	Not Rated	No. 6	—	2"	—	—	1/16"	No	—	—	00000000	00000	00000	00000


								90°	3											—	1/8"	3/16"	9/16"	1 1/16"	3/8"	—	1 5/16"	1 1/8"	Not Rated	No. 6	—	1 5/8"	—	—	1/16"	No	—	—	00000000	00000	0000	0000




																				Chrome-Plated Brass—Polished

										90°										3	—	1/8"	1/8"	3/4"	1 1/16"	3/8"	—	1 3/8"	1 1/4"	Not Rated	No. 6	—	2"	—	—	1/16"	No	—	—	00000000	00000	00000	00000


										90°	3									—	1/8"	3/16"	9/16"	1 1/16"	3/8"	—	1 5/16"	1 1/8"	Not Rated	No. 6	—	1 5/8"	—	—	1/16"	No	—	—	00000000	00000	0000	0000

Weld-On-Mount Recessed Pull Handles

This handle provides a stronger connection than those attached with screws or nuts. It fits into a cutout, so it's flush with the mounting surface. Use this handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of stainless steel, it has excellent corrosion resistance and good chemical resistance.

			For Panel Cutout, mm
Ht., mm	Wd., mm	Back Projection, mm	Ht.	Wd.	Pull Cap.		Each







			304 Stainless Steel—Dull

			122	62	16	90	40	Not Rated	000000	00000

Spring-Loaded Unthreaded Through-Hole-Mount Folding Pull Handles with Mounting Plate

Style 4

When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. All have round grips that allow your hand to pivot in any direction.

Style 4—Style 4 handles fit into a cutout, so they're flush with the mounting surface.

304 Stainless Steel—Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Zinc-Plated Steel—Steel handles are painted or plated for rust resistance.

									Mounting Plate				Temp., ° F			Each
	Folding Angle	No. of Mounting Holes	Grip Dia.	Handle Wd.	Projection	Back Projection	Pull Cap., lbf	Mounting Screw Size	Ht.	Wd.	Thk.	Mounting Fasteners Included	Min.	Max.		1-24	25-99	100-Up
Style 4—Round Grip







				304 Stainless Steel with Plastic Grip—Dull

				90°	8	5/8"	3 3/4"	2 11/16"	3/8"	165	No. 10	4 1/2"	6"	1/16"	No	15	210	0000000	000000	000000	000000




						Zinc-Plated Steel with Plastic Grip—Dull

						90°	8	5/8"	3 3/4"	2 3/4"	3/8"	85	No. 10	4 1/2"	6"	1/16"	No	15	210	0000000	00000	00000	00000


						90°	12	13/16"	4 3/4"	3 3/8"	9/16"	330	No. 10	5"	7 1/8"	1/16"	No	15	210	0000000	00000	00000	00000

Concealed Unthreaded Through-Hole-Mount Recessed Pull Handles

Press on the top of the handle grip and it rotates out for use. Often used on hatches and pocket doors, these handles fit into a cutout, so they are flush with the mounting surface. Fasten them directly to the front of the surface. Made of stainless steel, these handles have excellent corrosion resistance and good chemical resistance.

Mounting Hole					For Panel Cutout, mm			Mounting Screw
No. of	Ctr.-to-Ctr. Lg., mm	Ht., mm	Wd., mm	Back Projection, mm	Ht.	Wd.	Pull Cap.	Size	Lg., mm	Mounting Fasteners Included		Each







			304 Stainless Steel—Dull

			2	76	90	24	36	52	18.5	Not Rated	M3.5	22	Yes	0000000	000000


			2	94	110	24	42	64	18.5	Not Rated	M3.5	22	Yes	0000000	00000

Threaded-Hole-Mount Recessed Folding Pull Handles with Mounting Plate

Chrome-Plated Zinc

316 Stainless Steel

Thread screws through holes from the back of your surface into the handle to install. This handle fits into a cutout, so it's flush with the mounting surface. Its grip drops out of the way when you let go. When not in use, the spring-loaded hinge keeps the grip flush with the mounting plate and prevents rattling. Use this handle to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Its rectangular grip has a flat surface that keeps your hand from slipping.

Chrome-Plated Zinc—Chrome-plated zinc handles have good corrosion resistance.

316 Stainless Steel—316 stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

			Grip					For Panel Cutout			Mounting Screw		Mounting Plate				Temp., ° F			Each
	Folding Angle	No. of Mounting Holes	Ht.	Thk.	Handle Wd.	Projection	Back Projection	Ht.	Wd.	Pull Cap.	Size	Lg., mm	Ht.	Wd.	Thk.	Mounting Fasteners Included	Min.	Max.		1-19	20-Up
Rectangular Grip with Spring-Loaded Hinge







				Chrome-Plated Zinc with Rubber Grip—Polished

				90°	4	11/16"	9/16"	3 3/4"	1 13/16"	11/16"	3"	5 5/16"	Not Rated	M5 × 0.8 mm	8	3 3/16"	5 9/16"	5/32"	Yes	-10	200	00000000	0000000	000000




						316 Stainless Steel with Stainless Steel Grip—Polished

						90°	4	1/2"	5/8"	4 3/16"	3 3/8"	15/16"	3 1/4"	5 3/4"	Not Rated	M5 × 0.8 mm	12	3 13/16"	5 15/16"	5/16"	Yes	Not Rated	Not Rated	00000000	000000	000000